Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Squeezed_Superconducting_Qubit_Magnetic_Sensor

Walter Ayala

Published Sep 24, 2026• 0 citations
Publisher

Abstract

This document presents Version 6.1 of a proposed quantum magnetic sensor based on acollectively prepared, spin-squeezed ensemble of superconducting qubits.The central objective is to determine, experimentally and reproducibly, whether quantumstate preparation can improve magnetic-field estimation relative to a matched unsqueezedsuperconducting-qubit reference operated with the same device, readout chain, resource budget,and total cycle time.A critical physical refinement of the present version is that a superconducting qubit is notassumed to couple to magnetic field through the bare electron gyromagnetic ratio.Instead, the magnetic transduction coefficient is defined operationally asκB,i =⃓⃓⃓⃓∂ωi∂B⃓⃓⃓⃓,or, for flux-mediated devices,κB,i =⃓⃓⃓⃓∂ωi∂Φi⃓⃓⃓⃓Mi,where Miis the effective field-to-flux coupling coefficient.This formulation permits transmon, SQUID-loop, fluxonium, or related architectures withoutconflating artificial-qubit dynamics with physical electron-spin Zeeman coupling.The quantum-state resource is characterized using the optimized Wineland spin-squeezingparameterξ2R =N minn⊥ Var(Sn⊥ )|⟨S⟩|2.Values below unity constitute a metrological spin-squeezing criterion under the statedcollective-spin model.The primary metrological endpoint is not ξ−1R alone.Instead, the proposed experiment directly compares the measured magnetic-field sensitivityper square root bandwidth of the squeezed protocol against a matched coherent/unsqueezedprotocol:Gpair =ηB,cohηB,sq. The principal confirmatory criterion is that the preregistered 95% confidence interval forthe paired gain exclude unity after accounting for preparation overhead, contrast, decoherence,readout noise, calibration uncertainty, device-to-device variation, and cooldown-to-cooldownvariation.The framework includes Hamiltonian modeling, collective squeezing, Ramsey interferometry,classical and quantum Fisher information, open-system dynamics, magnetic transductioncalibration, null tests, blind analysis, preregistration, hierarchical statistics, uncertainty budgets,replication criteria, falsification rules, data schemas, and a reproducible Python referenceimplementation.No experimental result is claimed.

DOI
10.5281/zenodo.22943297

Related papers

Quantum_Metrology_System_with_Spin_Squeezed_States

Walter Ayala

This work presents a theoretical, technical, statistical, and experimental framework for aquantum metrology system based on collective spin squeezing. The objective is to determineexperimentally whether an atomic ensemble can be prepared in a spin-squeezed state andwhether the resulting state provides a measurable metrological advantage for estimation of aweak physical parameter, such as a magnetic field.The central quantity is the Wineland spin-squeezing parameter, denoted here by ξ2R,ξ2R =N(∆S⊥)2|⟨S⟩|2,where S⊥ is the collective-spin component along the optimally squeezed transverse direc-tion. Values ξ2R < 1 indicate metrologically useful spin squeezing under the assumptions ofthe corresponding Ramsey-type measurement protocol.The v2.1 framework explicitly separates three concepts that are sometimes conflated: re-duction of collective-spin variance, metrological spin squeezing, and experimentally demon-strated parameter-estimation gain. It also distinguishes the quantum Fisher information of astate from the classical Fisher information obtained by a particular measurement.The protocol contains baseline characterization, squeezing generation, tomography of thetransverse covariance matrix, calibration of detection efficiency, estimation of systematic un-certainties, independent metrological testing, and reproducibility measurements. Negativecontrols are included to distinguish genuine quantum-projection-noise reduction from ordi-nary technical-noise suppression.The proposal is falsifiable. A failure to obtain a confidence interval for ξ2R below unity,failure to reproduce the effect on independent runs, or failure to demonstrate a sensitivityimprovement under a matched experimental comparison constitutes a negative result for thecorresponding hypothesis.No experimental result is claimed.

•Sep 24, 2026•0 citations

Analog_Quantum_Simulator_of_Spin_Models

Walter Ayala

Version 6.1 develops an integral framework for an analog quantum simulator of spin modelsbased on programmable superconducting-qubit arrays.The principal objective is not merely to construct a quantum device, but to establish atraceable mappingcontrol parameters −→ Hreal −→ quantum evolution −→ observables −→ classical reference.The framework supports transverse-field Ising, XY, XXZ, Heisenberg, long-range, anddisordered spin Hamiltonians.Version 6.1 introduces an explicit Hamiltonian- identification layer between hardwarecalibration and scientific validation.The realized Hamiltonian is decomposed into target terms, static calibration errors, dynamiccontrol errors, crosstalk, leakage, decoherence, and residual unwanted interactions.Validation is organized hierarchically:1. hardware calibration;2. Hamiltonian identification;3. state-preparation validation;4. readout calibration;5. static observable validation;6. dynamical observable validation;7. finite-size benchmarking;8. statistical equivalence testing;9. cross-device reproducibility;10. independent analytical reproduction. The statistical framework replaces the inadequate criterion of “statistical significance ofagreement” with an equivalence framework based on preregistered tolerances.The primary hypothesis is therefore formulated using two one-sided tests (TOST) or anequivalent confidence interval criterion:|∆O| < ϵO.Version 6.1 additionally specifies:• a supplementary Bayesian posterior probability of equivalence as a robustness check;• an explicit distinction between engineering no-go and physical falsification.The framework also specifies negative controls, positive controls, blind analysis, lockedanalysis code, exclusion rules, uncertainty propagation, data provenance, and reproducibilityrequirements.No experimental result or quantum advantage is claimed.

•Sep 24, 2026•0 citations

Quantum sensors that compute: quantum computational magnetic-field sensing using a superconducting qubit

Purnendu Sen, Mathieu Ouellet, Saeed A. Khan +6 more

A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.

quant-pharXiv:2608.17400•Aug 19, 2026•7 citations

Quantum metrology based on superconducting qubits

Anton Kolosvetov, Nikolay Gusarov, Vladimir Slepnev +4 more

Quantum metrology based on superconducting qubits offers unprecedented precision in measuring fundamental physical quantities, particularly magnetic fields. In this study, we develop a modified quantum phase estimation algorithm utilizing superconducting qubits, enhanced by optimized initial state preparation, significantly improving measurement sensitivity and reducing estimation times compared to conventional techniques. To ensure practical applicability and robustness, we incorporate advanced noise modeling, including intrinsic decoherence effects such as flux-induced noise and Purcell losses. Through detailed analytical modeling and numerical simulations, we systematically evaluate sensitivity and practical implementation constraints across various superconducting qubit architectures—transmon, fluxonium, conventional flux, and C-shunt flux qubits. Our approach quantifies the critical trade-offs between coherence, measurement dynamics, and sensitivity, identifying optimal operational regimes for high-performance quantum sensing. We introduce custom circuit simulation methods enabling the analysis and optimization of arbitrary superconducting quantum devices. Our findings provide a framework for advancing quantum-enhanced magnetometry and promise to facilitate next-generation quantum sensors for fundamental physics research, gravitational field measurements, and quantum-assisted searches for dark matter candidates.

npj Quantum Information•Jun 4, 2026•2 citations

Fisher-Information Recovery in Superconducting-Qubit Magnetometry with Squeezed-Microwave Readout

M. -R. Yun, Y. -J. Qu, Zheng Shan +3 more

The performance of superconducting-qubit magnetometers depends not only on magnetic-field encoding during Ramsey interrogation, but also on how efficiently the encoded information is recovered during readout. Squeezed microwaves provide a promising route to improve information extraction by suppressing readout noise, yet how such readout enhancement translates into accessible information for magnetic-field estimation remains unclear. Here we develop an effective detected-mode framework linking projected quadrature noise, state-assignment error, and the classical Fisher information accessible from binary readout outcomes. A finite mismatch between the squeezed quadrature and the discrimination axis produces an optimal squeezing strength through the competition between squeezed and anti-squeezed fluctuations. We further show that squeezed readout improves the readout-limited magnetic-field sensitivity by recovering information otherwise lost during state assignment, with the enhancement remaining robust against quadrature mismatch, transmission loss, and added noise. These results establish a quantitative connection between squeezed-microwave readout and measurement-stage information recovery in superconducting quantum sensing.

quant-pharXiv:2609.08598•Sep 9, 2026•0 citations

Microwave_Cavity_with_SQUID-Tunable_Frequency

Walter Ayala

Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.

•Sep 24, 2026•0 citations
This document presents Version 6.1 of a proposed quantum magnetic sensor based on acollectively prepared, spin-squeezed ensemble of superconducting qubits.The central objective is to determine, experimentally and reproducibly, whether quantumstate preparation can improve magnetic-field estimation relative to a matched unsqueezedsuperconducting-qubit reference operated with the same device, readout chain, resource budget,and total cycle time.A critical physical refinement of the present version is that a superconducting qubit is notassumed to couple to magnetic field through the bare electron gyromagnetic ratio.Instead, the magnetic transduction coefficient is defined operationally asκB,i =⃓⃓⃓⃓∂ωi∂B⃓⃓⃓⃓,or, for flux-mediated devices,κB,i =⃓⃓⃓⃓∂ωi∂Φi⃓⃓⃓⃓Mi,where Miis the effective field-to-flux coupling coefficient.This formulation permits transmon, SQUID-loop, fluxonium, or related architectures withoutconflating artificial-qubit dynamics with physical electron-spin Zeeman coupling.The quantum-state resource is characterized using the optimized Wineland spin-squeezingparameterξ2R =N minn⊥ Var(Sn⊥ )|⟨S⟩|2.Values below unity constitute a metrological spin-squeezing criterion under the statedcollective-spin model.The primary metrological endpoint is not ξ−1R alone.Instead, the proposed experiment directly compares the measured magnetic-field sensitivityper square root bandwidth of the squeezed protocol against a matched coherent/unsqueezedprotocol:Gpair =ηB,cohηB,sq. The principal confirmatory criterion is that the preregistered 95% confidence interval forthe paired gain exclude unity after accounting for preparation overhead, contrast, decoherence,readout noise, calibration uncertainty, device-to-device variation, and cooldown-to-cooldownvariation.The framework includes Hamiltonian modeling, collective squeezing, Ramsey interferometry,classical and quantum Fisher information, open-system dynamics, magnetic transductioncalibration, null tests, blind analysis, preregistration, hierarchical statistics, uncertainty budgets,replication criteria, falsification rules, data schemas, and a reproducible Python referenceimplementation.No experimental result is claimed.
This work presents a theoretical, technical, statistical, and experimental framework for aquantum metrology system based on collective spin squeezing. The objective is to determineexperimentally whether an atomic ensemble can be prepared in a spin-squeezed state andwhether the resulting state provides a measurable metrological advantage for estimation of aweak physical parameter, such as a magnetic field.The central quantity is the Wineland spin-squeezing parameter, denoted here by ξ2R,ξ2R =N(∆S⊥)2|⟨S⟩|2,where S⊥ is the collective-spin component along the optimally squeezed transverse direc-tion. Values ξ2R < 1 indicate metrologically useful spin squeezing under the assumptions ofthe corresponding Ramsey-type measurement protocol.The v2.1 framework explicitly separates three concepts that are sometimes conflated: re-duction of collective-spin variance, metrological spin squeezing, and experimentally demon-strated parameter-estimation gain. It also distinguishes the quantum Fisher information of astate from the classical Fisher information obtained by a particular measurement.The protocol contains baseline characterization, squeezing generation, tomography of thetransverse covariance matrix, calibration of detection efficiency, estimation of systematic un-certainties, independent metrological testing, and reproducibility measurements. Negativecontrols are included to distinguish genuine quantum-projection-noise reduction from ordi-nary technical-noise suppression.The proposal is falsifiable. A failure to obtain a confidence interval for ξ2R below unity,failure to reproduce the effect on independent runs, or failure to demonstrate a sensitivityimprovement under a matched experimental comparison constitutes a negative result for thecorresponding hypothesis.No experimental result is claimed.
Version 6.1 develops an integral framework for an analog quantum simulator of spin modelsbased on programmable superconducting-qubit arrays.The principal objective is not merely to construct a quantum device, but to establish atraceable mappingcontrol parameters −→ Hreal −→ quantum evolution −→ observables −→ classical reference.The framework supports transverse-field Ising, XY, XXZ, Heisenberg, long-range, anddisordered spin Hamiltonians.Version 6.1 introduces an explicit Hamiltonian- identification layer between hardwarecalibration and scientific validation.The realized Hamiltonian is decomposed into target terms, static calibration errors, dynamiccontrol errors, crosstalk, leakage, decoherence, and residual unwanted interactions.Validation is organized hierarchically:1. hardware calibration;2. Hamiltonian identification;3. state-preparation validation;4. readout calibration;5. static observable validation;6. dynamical observable validation;7. finite-size benchmarking;8. statistical equivalence testing;9. cross-device reproducibility;10. independent analytical reproduction. The statistical framework replaces the inadequate criterion of “statistical significance ofagreement” with an equivalence framework based on preregistered tolerances.The primary hypothesis is therefore formulated using two one-sided tests (TOST) or anequivalent confidence interval criterion:|∆O| < ϵO.Version 6.1 additionally specifies:• a supplementary Bayesian posterior probability of equivalence as a robustness check;• an explicit distinction between engineering no-go and physical falsification.The framework also specifies negative controls, positive controls, blind analysis, lockedanalysis code, exclusion rules, uncertainty propagation, data provenance, and reproducibilityrequirements.No experimental result or quantum advantage is claimed.
A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.
Quantum metrology based on superconducting qubits offers unprecedented precision in measuring fundamental physical quantities, particularly magnetic fields. In this study, we develop a modified quantum phase estimation algorithm utilizing superconducting qubits, enhanced by optimized initial state preparation, significantly improving measurement sensitivity and reducing estimation times compared to conventional techniques. To ensure practical applicability and robustness, we incorporate advanced noise modeling, including intrinsic decoherence effects such as flux-induced noise and Purcell losses. Through detailed analytical modeling and numerical simulations, we systematically evaluate sensitivity and practical implementation constraints across various superconducting qubit architectures—transmon, fluxonium, conventional flux, and C-shunt flux qubits. Our approach quantifies the critical trade-offs between coherence, measurement dynamics, and sensitivity, identifying optimal operational regimes for high-performance quantum sensing. We introduce custom circuit simulation methods enabling the analysis and optimization of arbitrary superconducting quantum devices. Our findings provide a framework for advancing quantum-enhanced magnetometry and promise to facilitate next-generation quantum sensors for fundamental physics research, gravitational field measurements, and quantum-assisted searches for dark matter candidates.
The performance of superconducting-qubit magnetometers depends not only on magnetic-field encoding during Ramsey interrogation, but also on how efficiently the encoded information is recovered during readout. Squeezed microwaves provide a promising route to improve information extraction by suppressing readout noise, yet how such readout enhancement translates into accessible information for magnetic-field estimation remains unclear. Here we develop an effective detected-mode framework linking projected quadrature noise, state-assignment error, and the classical Fisher information accessible from binary readout outcomes. A finite mismatch between the squeezed quadrature and the discrimination axis produces an optimal squeezing strength through the competition between squeezed and anti-squeezed fluctuations. We further show that squeezed readout improves the readout-limited magnetic-field sensitivity by recovering information otherwise lost during state assignment, with the enhancement remaining robust against quadrature mismatch, transmission loss, and added noise. These results establish a quantitative connection between squeezed-microwave readout and measurement-stage information recovery in superconducting quantum sensing.
Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.