Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Microwave_Cavity_with_SQUID-Tunable_Frequency

Walter Ayala

Published Sep 24, 2026• 0 citations
Publisher

Abstract

Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.

DOI
10.5281/zenodo.22945069

Related papers

Broadband SQUID amplifiers for photonic applications

Vladimir Polushkin, D. Glowacka, R. Hart +1 more

The dynamics and noise of a dc SQUID (the Superconducting Quantum Interference Device), with the McCumber parameter /spl beta//sub c/=2/spl pi/R/sup 2/l/sub c/C//spl Phi//sub 0/ close to the unity (where I/sub c/, R, C is the critical current, the shunt resistance and the capacitance of the Josephson junctions comprising the SQUID, respectively, /spl Phi//sub 0/=2.07 10/sup -15/ Wb is the magnetic flux quantum) integrated with a planar spiral input coil, have been experimentally studied. The length of the spiral input coil was chosen so as to match its /spl lambda//4 microwave resonance frequency to the plasma resonance frequency of the SQUID. The input coil resonance is found to enhance the overall quality factor Q of the Josephson oscillations in the SQUID and, as a result, to increase the dynamic resistance R/sub d/ and the gradient of the flux-to-voltage characteristics, /spl delta/V//spl delta//spl Phi/, without hysteresis. A dc SQUID with a loop inductance L=30.5 pH, /spl beta//sub c/=0.72, and a 6 turn input coil demonstrated a non-distorted quasi-sinusoidal flux-to-voltage transfer function with an exceptionally large modulation depth of 140 /spl mu/V peak-to-peak. The spectral density of the magnetic flux noise was as low as 3.5/spl times/10/sup -7/ /spl Phi//sub 0//Hz/sup 1/2/ in the double stage configuration, measured at a temperature 4.2 K using direct read out electronics. In combination with an intermediary transformer, the current resolution of the SQUID is as low as 1.25 pA/Hz/sup 1/2/ with an input coil inductance of 100 nH.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•1 citation

Broadband tunable phase shifter for microwaves

Jinli Zhang, Tianyi Li, Roope Kokkoniemi +8 more

We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, |S21| = 1, can be theoretically achieved along a curve where the phase shift is controllable by the magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from 0.07 × π to 0.14 × π radians along the full-transmission curve with the input frequency ranging from 6.00 GHz to 6.28 GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.

arXiv:2003.01356•AIP Advances•Jun 1, 2020•9 citations

Tunable Superconducting Cavity using Superconducting Quantum Interference Device Metamaterials

Samuel Kim, David B. Shrekenhamer, K. McElroy +2 more

Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.

Scientific Reports•Mar 15, 2019•13 citations

Effect of an input coil microwave resonance on dynamics and noise properties of a dc superconducting quantum interference device operating close to the hysteretic mode

Vladimir Polushkin, D. Glowacka, R. Hart +1 more

The dynamics and noise of a dc superconducting quantum interference device (SQUID) with the McCumber parameter βc=2πR2IcC/Φ0 close to the unity (where Ic, R, C are the critical current, the shunt resistance, and the capacitance of the Josephson junctions comprising the SQUID, respectively, and Φ0=2.07×10−15 Wb is the magnetic flux quantum) integrated with a planar spiral input coil have been experimentally studied. The length of the spiral input coil was chosen to match its λ/4 microwave resonance frequency to the plasma resonance frequency of the SQUID. The input coil resonance enhances the overall quality factor Q of the Josephson oscillations in the SQUID and, as a result, increases the dynamic resistance Rd and the gradient of the flux-to-voltage characteristics ∂V/∂Φ without hysteresis. This relaxes the tolerance for the βc parameter, simplifies the technological process, and improves the yield of devices. A dc SQUID with loop inductance L=31.4 pH, βc=0.72, and a six turn input coil has demonstrated a nondistorted quasisinusoidal flux-to-voltage transfer function with an exceptionally large modulation depth of approximately 140 μV peak-to-peak. A spectral density of the intrinsic magnetic flux noise as low as 3.5×10−7 Φ0/Hz1/2 has been measured in the double stage configuration at a temperature of 4.2 K using direct read-out electronics. This corresponds to the intrinsic energy resolution of ε=12.5h. In combination with an intermediary transformer, the current resolution of the SQUID is as low as 1.25 pA/Hz1/2 with an input coil inductance of 58 nH. The coupled energy resolution is εc=45h in the white noise region.

Review of Scientific Instruments•Mar 1, 1999•9 citations

Microwave photon generation in a doubly tunable superconducting resonator

I-M. Svensson, M. Pierre, Michaël Simoen +7 more

We have created a doubly tunable resonator, with the intention to simulate relativistic motion of the resonator boundaries in real space. Our device is a superconducting coplanar-waveguide microwave resonator, with fundamental resonant frequency ω 1 / (2 π ) ~ 5 GHz. Both of its ends are terminated to ground via dc-SQUIDs, which serve as magnetic-flux-controlled inductances. Applying a flux to either SQUID allows the tuning of ω 1 / (2 π ) by approximately 700 MHz. Using two separate on-chip magnetic-flux lines, we modulate the SQUIDs with two tones of equal frequency, close to 2 ω 1 . We observe photon generation, at ω 1 , above a certain pump amplitude threshold. By varying the relative phase of the two pumps we are able to control this threshold, in good agreement with a theoretical model. At the same time, some of our observations deviate from the theoretical predictions, which we attribute to parasitic couplings resulting in current driving of the SQUIDs.

arXiv:1706.06821•Journal of Physics Conference Series•Mar 1, 2018•16 citations

Simulation framework for microwave SQUID multiplexer optimization

Constantin Schuster, Mathias Wegner, Sebastian Kempf

So far, performance prediction and optimization of microwave SQUID multiplexers have largely been based on simple approximate analytical models and experimental results. This is caused by the complexity of the underlying physics and the intricacy of operation and readout parameters. As a simplified description can never account for all potential effects occurring in a real device, we have developed a software framework to simulate the characteristics and performance of a microwave SQUID multiplexer. Our simulation framework is a powerful tool to guide understanding and optimization of microwave SQUID multiplexers and other related devices. It includes common readout schemes such as open-loop or flux ramp-modulated readout as well as the nonlinear behavior of Josephson tunnel junctions. Moreover, it accounts for the non-zero response time of superconducting microwave resonators with high loaded quality factors as well as the most significant noise contributions such as amplifier noise, resonator noise, as well as SQUID noise. This ultimately leads to a prediction of device performance that is significantly better compared to simple analytical methods. Using the simulation framework, we discuss first steps toward full microwave SQUID multiplexer optimization and highlight some other applications for which our simulation framework can be used.

arXiv:2208.02013•Journal of Applied Physics•Jan 28, 2023•12 citations
Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.
The dynamics and noise of a dc SQUID (the Superconducting Quantum Interference Device), with the McCumber parameter /spl beta//sub c/=2/spl pi/R/sup 2/l/sub c/C//spl Phi//sub 0/ close to the unity (where I/sub c/, R, C is the critical current, the shunt resistance and the capacitance of the Josephson junctions comprising the SQUID, respectively, /spl Phi//sub 0/=2.07 10/sup -15/ Wb is the magnetic flux quantum) integrated with a planar spiral input coil, have been experimentally studied. The length of the spiral input coil was chosen so as to match its /spl lambda//4 microwave resonance frequency to the plasma resonance frequency of the SQUID. The input coil resonance is found to enhance the overall quality factor Q of the Josephson oscillations in the SQUID and, as a result, to increase the dynamic resistance R/sub d/ and the gradient of the flux-to-voltage characteristics, /spl delta/V//spl delta//spl Phi/, without hysteresis. A dc SQUID with a loop inductance L=30.5 pH, /spl beta//sub c/=0.72, and a 6 turn input coil demonstrated a non-distorted quasi-sinusoidal flux-to-voltage transfer function with an exceptionally large modulation depth of 140 /spl mu/V peak-to-peak. The spectral density of the magnetic flux noise was as low as 3.5/spl times/10/sup -7/ /spl Phi//sub 0//Hz/sup 1/2/ in the double stage configuration, measured at a temperature 4.2 K using direct read out electronics. In combination with an intermediary transformer, the current resolution of the SQUID is as low as 1.25 pA/Hz/sup 1/2/ with an input coil inductance of 100 nH.
We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, |S21| = 1, can be theoretically achieved along a curve where the phase shift is controllable by the magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from 0.07 × π to 0.14 × π radians along the full-transmission curve with the input frequency ranging from 6.00 GHz to 6.28 GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.
Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.
The dynamics and noise of a dc superconducting quantum interference device (SQUID) with the McCumber parameter βc=2πR2IcC/Φ0 close to the unity (where Ic, R, C are the critical current, the shunt resistance, and the capacitance of the Josephson junctions comprising the SQUID, respectively, and Φ0=2.07×10−15 Wb is the magnetic flux quantum) integrated with a planar spiral input coil have been experimentally studied. The length of the spiral input coil was chosen to match its λ/4 microwave resonance frequency to the plasma resonance frequency of the SQUID. The input coil resonance enhances the overall quality factor Q of the Josephson oscillations in the SQUID and, as a result, increases the dynamic resistance Rd and the gradient of the flux-to-voltage characteristics ∂V/∂Φ without hysteresis. This relaxes the tolerance for the βc parameter, simplifies the technological process, and improves the yield of devices. A dc SQUID with loop inductance L=31.4 pH, βc=0.72, and a six turn input coil has demonstrated a nondistorted quasisinusoidal flux-to-voltage transfer function with an exceptionally large modulation depth of approximately 140 μV peak-to-peak. A spectral density of the intrinsic magnetic flux noise as low as 3.5×10−7 Φ0/Hz1/2 has been measured in the double stage configuration at a temperature of 4.2 K using direct read-out electronics. This corresponds to the intrinsic energy resolution of ε=12.5h. In combination with an intermediary transformer, the current resolution of the SQUID is as low as 1.25 pA/Hz1/2 with an input coil inductance of 58 nH. The coupled energy resolution is εc=45h in the white noise region.
We have created a doubly tunable resonator, with the intention to simulate relativistic motion of the resonator boundaries in real space. Our device is a superconducting coplanar-waveguide microwave resonator, with fundamental resonant frequency ω 1 / (2 π ) ~ 5 GHz. Both of its ends are terminated to ground via dc-SQUIDs, which serve as magnetic-flux-controlled inductances. Applying a flux to either SQUID allows the tuning of ω 1 / (2 π ) by approximately 700 MHz. Using two separate on-chip magnetic-flux lines, we modulate the SQUIDs with two tones of equal frequency, close to 2 ω 1 . We observe photon generation, at ω 1 , above a certain pump amplitude threshold. By varying the relative phase of the two pumps we are able to control this threshold, in good agreement with a theoretical model. At the same time, some of our observations deviate from the theoretical predictions, which we attribute to parasitic couplings resulting in current driving of the SQUIDs.
So far, performance prediction and optimization of microwave SQUID multiplexers have largely been based on simple approximate analytical models and experimental results. This is caused by the complexity of the underlying physics and the intricacy of operation and readout parameters. As a simplified description can never account for all potential effects occurring in a real device, we have developed a software framework to simulate the characteristics and performance of a microwave SQUID multiplexer. Our simulation framework is a powerful tool to guide understanding and optimization of microwave SQUID multiplexers and other related devices. It includes common readout schemes such as open-loop or flux ramp-modulated readout as well as the nonlinear behavior of Josephson tunnel junctions. Moreover, it accounts for the non-zero response time of superconducting microwave resonators with high loaded quality factors as well as the most significant noise contributions such as amplifier noise, resonator noise, as well as SQUID noise. This ultimately leads to a prediction of device performance that is significantly better compared to simple analytical methods. Using the simulation framework, we discuss first steps toward full microwave SQUID multiplexer optimization and highlight some other applications for which our simulation framework can be used.