Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Population Inversion, Saturation, and Laser Systems

Surendra Singh

Published Sep 23, 2026• 0 citations
Publisher

Abstract

This chapter begins with a heuristic derivation of atomic population rate equations which include changes to level populations due to stimulated transitions as well as level relaxations and pump. These equations are used to study the saturation of population inversion with increasing light intensity and its dependence on the type of gain medium (three-level gain media vs. four-level gain media), lineshape and nature of line broadening (homogeneous vs inhomogeneous broadening). How saturation affects lineshape and thus gain and absorption giving rise to phenomena like power broadening and spectral hole burning is also discussed. The chapter summarizes the equations of motion for atomic polarization, inversion and the cavity field describing their nonlinear dynamical coupling. These equations, known as the Maxwell-Bloch equations, provide a complete description of atom-field interaction in a laser. Approximations of these equations, including the rate equation approximation, to deal with different laser classes are briefly described. These will be used in the next few chapters to explore and understand the rich and varied behavior of lasers. The chapter ends with a summary of select gain media for different types of commonly used lasers.

DOI
10.1201/9781003584179-7

Related papers

Strong-Field Saturation Effects in Laser Media

Donald H. Close

Using Lamb's model, we analyze the effects of gain saturation by strong traveling-wave fields in dilute laser media. Using approximate solutions of an integral equation for the population inversion density (PID), the index of refraction and incremental gain are studied for arbitrarily strong fields. Effects of atomic motion are included for a Maxwellian velocity distribution, but pressure effects are neglected. The case of a monochromatic field leads to the saturation results of Gordon, White, and Rigden, which are studied as a function of frequency. For a small ratio of natural to Doppler linewidths, there is a transition from inhomogeneous to homogeneous broadening for sufficiently strong fields. An effect of particular interest is the generation of waves at $2{\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, $2{\ensuremath{\omega}}_{2}\ensuremath{-}{\ensuremath{\omega}}_{1}$, and higher order sidebands by two strong input signals at ${\ensuremath{\omega}}_{1}$ and ${\ensuremath{\omega}}_{2}$. The source of the parametric gain at these frequencies is the time-dependent gain saturation due to the presence of multiple strong fields. For ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ small compared to the decay rates ${\ensuremath{\gamma}}_{a}$ and ${\ensuremath{\gamma}}_{b}$ of the laser levels, the gain at these intermodulation sidebands is computed as a function of the field strengths. The limiting cases of homogeneous and inhomogeneous (due to atomic motion) broadening are studied in detail. These two cases give essentially the same results, for a given unsaturated gain. Numerical results indicate that a first-order side-band intensity at least 10% as large as that of the inducing fields can be easily observed in practice. The integral equation for the PID is converted into an infinite set of linear algebraic equations for a typical solid-state laser. The conditions under which this set of equations can be limited to a finite number is discussed, and the dependence of the sideband gain on ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ is calculated. For large ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, the gain at the $m\mathrm{th}$ sideband decreases as ${({\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2})}^{\ensuremath{-}m}$.

Physical Review•Jan 10, 1967•81 citations

Strong field saturation effects in laser media

Donald H. Close

Using Lamb's model, we analyze the effects of gain saturation by strong traveling-wave fields in dilute laser media. Using approximate solutions of an integral equation for the population inversion density (PID), the index of refraction and incremental gain are studied for arbitrarily strong fields. Effects of atomic motion are included for a Maxwellian velocity distribution, but pressure effects are neglected. The case of a monochromatic field leads to the saturation results of Gordon, White, and Rigden, which are studied as a function of frequency. For a small ratio of natural to Doppler linewidths, there is a transition from inhomogeneous to homogeneous broadening for sufficiently strong fields. An effect of particular interest is the generation of waves at $2{\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, $2{\ensuremath{\omega}}_{2}\ensuremath{-}{\ensuremath{\omega}}_{1}$, and higher order sidebands by two strong input signals at ${\ensuremath{\omega}}_{1}$ and ${\ensuremath{\omega}}_{2}$. The source of the parametric gain at these frequencies is the time-dependent gain saturation due to the presence of multiple strong fields. For ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ small compared to the decay rates ${\ensuremath{\gamma}}_{a}$ and ${\ensuremath{\gamma}}_{b}$ of the laser levels, the gain at these intermodulation sidebands is computed as a function of the field strengths. The limiting cases of homogeneous and inhomogeneous (due to atomic motion) broadening are studied in detail. These two cases give essentially the same results, for a given unsaturated gain. Numerical results indicate that a first-order side-band intensity at least 10% as large as that of the inducing fields can be easily observed in practice. The integral equation for the PID is converted into an infinite set of linear algebraic equations for a typical solid-state laser. The conditions under which this set of equations can be limited to a finite number is discussed, and the dependence of the sideband gain on ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ is calculated. For large ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, the gain at the $m\mathrm{th}$ sideband decreases as ${({\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2})}^{\ensuremath{-}m}$.

IEEE Journal of Quantum Electronics•Apr 1, 1966•2 citations

Three- and four-level lasers

Thomas Erneux, P. Glorieux

In Chapter 1, we introduced the standard rate equations (SRE) for a laser containing two-level atoms between which stimulated emission is possible. But real lasers exhibit much more complicated energy level schemes. Throughout this chapter, we consider several models in which the light–matter interaction is described by population equations for all the levels involved in the laser operation. Although they are mathematically more complicated, we shall investigate these equations in the same way as in Chapter 1, i.e. by formulating dimensionless equations and by analyzing the stability properties of the steady states. The basic ingredients of the SRE model used up to here, namely pumping and relaxation processes, play key roles in the efficiency of lasers. But already during the pioneering days of the laser, it appeared important to investigate three- and four-level models in order to obtain more reliable information on quantities such as the power conversion efficiency or the response time. The common extensions of the two-level SRE typically consider an open two-level system, or three- or four-level systems, depending on the nature of the active medium. Restriction to as few as four levels is again a crude simplification of the complex population dynamics occurring in most lasers. But it is rather surprising to see how good these simple kinetic models are. As we demonstrate by studying specific examples, the solution of the three- or four-level rate equations differs only slightly from the solution of the SRE.

Cambridge University Press eBooks•Apr 29, 2010•0 citations

Nonlinear effects in traveling wave laser amplifiers

Donald H. Close

Using semiclassical radiation theory, a formalism similar to that used by Lamb in his "Theory of an Optical Maser" is developed for studying the amplification of vector traveling waves in a laser-type medium. The effect of the medium on the waves is given in terms of space (or time) dependent field amplitudes and phases and a nonlinear index of refraction. With particular emphasis on typical gaseous media, the effects of Doppler broadening are treated in detail for arbitrary ratios of natural to Doppler linewidths. Polarization and propagation vectors in various directions are considered, and the nonlinear effects are found to make an isotropic medium effectively anisotropic. Lowest order nonlinear effects (due to a polarization cubic in the field amplitudes) are studied extensively, and the frequency dependence of several of these processes is presented in graphical form. In particular, the introduction of fields at new frequencies and polarization effects are considered. The characteristics of these nonlinear processes peculiar to Doppler broadened lines are discussed, and the processes are interpreted in terms of saturation and coherent modulation of the population inversion density. Strong nonlinear effects are considered in a more approximate way and are found to consist of saturation of the various linear and nonlinear processes previously considered. These strong nonlinear effects should occur at low enough intensities to be easily observed in practice on a CW basis. With the present formalism, the analytical results of Gordon, White and Rigden regarding gain saturation in laser amplifiers are obtained, and the extension is made to include frequencies away from line center and the effects of multiple spectral components. Again, the introduction of fields at new frequencies is considered in detail. These results are also discussed in terms of saturation and coherent modulation of the populations and "hole burning".

•Sep 16, 2002•5 citations

Laser Photon Densities

The coupled rate equations for both the atomic level number densities and for the photon densities determine the behavior of a laser. In this chapter these equations are analyzed and the behavior of a laser under various conditions is exhibited. In the previous chapter the saturation of an atomic transition was studied with the assumption that the laser intensity is unchanged as it passes through the medium. This could be done using rate equations that did not include a separate rate equation for the photon density in the laser beam. Obviously this approximation is valid in only a few situations of restricted interest. This chapter analyzes the coupled rate equations that include the change in the photon density in the laser beam as the beam passes through an active medium.

WORLD SCIENTIFIC eBooks•Jun 12, 2017•0 citations

Laser oscillations

E. Rosencher, B. Vinter

We were able to show in Chapter 3 that a medium in which we can obtain a population inversion (i.e. a situation in which the population density in the excited state is greater than that in the fundamental level) allows for optical gain of an electromagnetic wave having a frequency near to the resonant frequency of the system. By introducing feedback of the amplified signal into the medium, the system can be made to oscillate naturally, resulting in laser oscillations. To obtain this population inversion, we must introduce at least a third (and perhaps even a fourth) energy level into the system. (We saw how a two-level system under the influence of an intense pump beam will saturate with no resulting population inversion.) The aim then of this chapter is to introduce the concepts necessary to extend our two-level system into a working model capable of illustrating the phenomenon of laser oscillation. We will not spend too much time discussing atomic transition lasers as they do not figure readily in our treatment of quantum electronic properties of semiconductors. An exception will be made, however; we brush upon the particular topics of a diode pumped laser in Complement 4.E and a quantum cascade laser in Complement 13.H.

Cambridge University Press eBooks•May 30, 2002•0 citations
This chapter begins with a heuristic derivation of atomic population rate equations which include changes to level populations due to stimulated transitions as well as level relaxations and pump. These equations are used to study the saturation of population inversion with increasing light intensity and its dependence on the type of gain medium (three-level gain media vs. four-level gain media), lineshape and nature of line broadening (homogeneous vs inhomogeneous broadening). How saturation affects lineshape and thus gain and absorption giving rise to phenomena like power broadening and spectral hole burning is also discussed. The chapter summarizes the equations of motion for atomic polarization, inversion and the cavity field describing their nonlinear dynamical coupling. These equations, known as the Maxwell-Bloch equations, provide a complete description of atom-field interaction in a laser. Approximations of these equations, including the rate equation approximation, to deal with different laser classes are briefly described. These will be used in the next few chapters to explore and understand the rich and varied behavior of lasers. The chapter ends with a summary of select gain media for different types of commonly used lasers.
Using Lamb's model, we analyze the effects of gain saturation by strong traveling-wave fields in dilute laser media. Using approximate solutions of an integral equation for the population inversion density (PID), the index of refraction and incremental gain are studied for arbitrarily strong fields. Effects of atomic motion are included for a Maxwellian velocity distribution, but pressure effects are neglected. The case of a monochromatic field leads to the saturation results of Gordon, White, and Rigden, which are studied as a function of frequency. For a small ratio of natural to Doppler linewidths, there is a transition from inhomogeneous to homogeneous broadening for sufficiently strong fields. An effect of particular interest is the generation of waves at $2{\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, $2{\ensuremath{\omega}}_{2}\ensuremath{-}{\ensuremath{\omega}}_{1}$, and higher order sidebands by two strong input signals at ${\ensuremath{\omega}}_{1}$ and ${\ensuremath{\omega}}_{2}$. The source of the parametric gain at these frequencies is the time-dependent gain saturation due to the presence of multiple strong fields. For ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ small compared to the decay rates ${\ensuremath{\gamma}}_{a}$ and ${\ensuremath{\gamma}}_{b}$ of the laser levels, the gain at these intermodulation sidebands is computed as a function of the field strengths. The limiting cases of homogeneous and inhomogeneous (due to atomic motion) broadening are studied in detail. These two cases give essentially the same results, for a given unsaturated gain. Numerical results indicate that a first-order side-band intensity at least 10% as large as that of the inducing fields can be easily observed in practice. The integral equation for the PID is converted into an infinite set of linear algebraic equations for a typical solid-state laser. The conditions under which this set of equations can be limited to a finite number is discussed, and the dependence of the sideband gain on ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ is calculated. For large ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, the gain at the mthm\mathrm{th}mth sideband decreases as ${({\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2})}^{\ensuremath{-}m}$.
Using Lamb's model, we analyze the effects of gain saturation by strong traveling-wave fields in dilute laser media. Using approximate solutions of an integral equation for the population inversion density (PID), the index of refraction and incremental gain are studied for arbitrarily strong fields. Effects of atomic motion are included for a Maxwellian velocity distribution, but pressure effects are neglected. The case of a monochromatic field leads to the saturation results of Gordon, White, and Rigden, which are studied as a function of frequency. For a small ratio of natural to Doppler linewidths, there is a transition from inhomogeneous to homogeneous broadening for sufficiently strong fields. An effect of particular interest is the generation of waves at $2{\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, $2{\ensuremath{\omega}}_{2}\ensuremath{-}{\ensuremath{\omega}}_{1}$, and higher order sidebands by two strong input signals at ${\ensuremath{\omega}}_{1}$ and ${\ensuremath{\omega}}_{2}$. The source of the parametric gain at these frequencies is the time-dependent gain saturation due to the presence of multiple strong fields. For ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ small compared to the decay rates ${\ensuremath{\gamma}}_{a}$ and ${\ensuremath{\gamma}}_{b}$ of the laser levels, the gain at these intermodulation sidebands is computed as a function of the field strengths. The limiting cases of homogeneous and inhomogeneous (due to atomic motion) broadening are studied in detail. These two cases give essentially the same results, for a given unsaturated gain. Numerical results indicate that a first-order side-band intensity at least 10% as large as that of the inducing fields can be easily observed in practice. The integral equation for the PID is converted into an infinite set of linear algebraic equations for a typical solid-state laser. The conditions under which this set of equations can be limited to a finite number is discussed, and the dependence of the sideband gain on ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$ is calculated. For large ${\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2}$, the gain at the mthm\mathrm{th}mth sideband decreases as ${({\ensuremath{\omega}}_{1}\ensuremath{-}{\ensuremath{\omega}}_{2})}^{\ensuremath{-}m}$.
In Chapter 1, we introduced the standard rate equations (SRE) for a laser containing two-level atoms between which stimulated emission is possible. But real lasers exhibit much more complicated energy level schemes. Throughout this chapter, we consider several models in which the light–matter interaction is described by population equations for all the levels involved in the laser operation. Although they are mathematically more complicated, we shall investigate these equations in the same way as in Chapter 1, i.e. by formulating dimensionless equations and by analyzing the stability properties of the steady states. The basic ingredients of the SRE model used up to here, namely pumping and relaxation processes, play key roles in the efficiency of lasers. But already during the pioneering days of the laser, it appeared important to investigate three- and four-level models in order to obtain more reliable information on quantities such as the power conversion efficiency or the response time. The common extensions of the two-level SRE typically consider an open two-level system, or three- or four-level systems, depending on the nature of the active medium. Restriction to as few as four levels is again a crude simplification of the complex population dynamics occurring in most lasers. But it is rather surprising to see how good these simple kinetic models are. As we demonstrate by studying specific examples, the solution of the three- or four-level rate equations differs only slightly from the solution of the SRE.
Using semiclassical radiation theory, a formalism similar to that used by Lamb in his "Theory of an Optical Maser" is developed for studying the amplification of vector traveling waves in a laser-type medium. The effect of the medium on the waves is given in terms of space (or time) dependent field amplitudes and phases and a nonlinear index of refraction. With particular emphasis on typical gaseous media, the effects of Doppler broadening are treated in detail for arbitrary ratios of natural to Doppler linewidths. Polarization and propagation vectors in various directions are considered, and the nonlinear effects are found to make an isotropic medium effectively anisotropic. Lowest order nonlinear effects (due to a polarization cubic in the field amplitudes) are studied extensively, and the frequency dependence of several of these processes is presented in graphical form. In particular, the introduction of fields at new frequencies and polarization effects are considered. The characteristics of these nonlinear processes peculiar to Doppler broadened lines are discussed, and the processes are interpreted in terms of saturation and coherent modulation of the population inversion density. Strong nonlinear effects are considered in a more approximate way and are found to consist of saturation of the various linear and nonlinear processes previously considered. These strong nonlinear effects should occur at low enough intensities to be easily observed in practice on a CW basis. With the present formalism, the analytical results of Gordon, White and Rigden regarding gain saturation in laser amplifiers are obtained, and the extension is made to include frequencies away from line center and the effects of multiple spectral components. Again, the introduction of fields at new frequencies is considered in detail. These results are also discussed in terms of saturation and coherent modulation of the populations and "hole burning".
The coupled rate equations for both the atomic level number densities and for the photon densities determine the behavior of a laser. In this chapter these equations are analyzed and the behavior of a laser under various conditions is exhibited. In the previous chapter the saturation of an atomic transition was studied with the assumption that the laser intensity is unchanged as it passes through the medium. This could be done using rate equations that did not include a separate rate equation for the photon density in the laser beam. Obviously this approximation is valid in only a few situations of restricted interest. This chapter analyzes the coupled rate equations that include the change in the photon density in the laser beam as the beam passes through an active medium.
We were able to show in Chapter 3 that a medium in which we can obtain a population inversion (i.e. a situation in which the population density in the excited state is greater than that in the fundamental level) allows for optical gain of an electromagnetic wave having a frequency near to the resonant frequency of the system. By introducing feedback of the amplified signal into the medium, the system can be made to oscillate naturally, resulting in laser oscillations. To obtain this population inversion, we must introduce at least a third (and perhaps even a fourth) energy level into the system. (We saw how a two-level system under the influence of an intense pump beam will saturate with no resulting population inversion.) The aim then of this chapter is to introduce the concepts necessary to extend our two-level system into a working model capable of illustrating the phenomenon of laser oscillation. We will not spend too much time discussing atomic transition lasers as they do not figure readily in our treatment of quantum electronic properties of semiconductors. An exception will be made, however; we brush upon the particular topics of a diode pumped laser in Complement 4.E and a quantum cascade laser in Complement 13.H.