Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Laser oscillations

E. Rosencher, B. Vinter

Published May 30, 2002• 0 citations
Publisher

Abstract

We were able to show in Chapter 3 that a medium in which we can obtain a population inversion (i.e. a situation in which the population density in the excited state is greater than that in the fundamental level) allows for optical gain of an electromagnetic wave having a frequency near to the resonant frequency of the system. By introducing feedback of the amplified signal into the medium, the system can be made to oscillate naturally, resulting in laser oscillations. To obtain this population inversion, we must introduce at least a third (and perhaps even a fourth) energy level into the system. (We saw how a two-level system under the influence of an intense pump beam will saturate with no resulting population inversion.) The aim then of this chapter is to introduce the concepts necessary to extend our two-level system into a working model capable of illustrating the phenomenon of laser oscillation. We will not spend too much time discussing atomic transition lasers as they do not figure readily in our treatment of quantum electronic properties of semiconductors. An exception will be made, however; we brush upon the particular topics of a diode pumped laser in Complement 4.E and a quantum cascade laser in Complement 13.H.

DOI
10.1017/cbo9780511754647.009

Related papers

Population Inversion, Saturation, and Laser Systems

Surendra Singh

This chapter begins with a heuristic derivation of atomic population rate equations which include changes to level populations due to stimulated transitions as well as level relaxations and pump. These equations are used to study the saturation of population inversion with increasing light intensity and its dependence on the type of gain medium (three-level gain media vs. four-level gain media), lineshape and nature of line broadening (homogeneous vs inhomogeneous broadening). How saturation affects lineshape and thus gain and absorption giving rise to phenomena like power broadening and spectral hole burning is also discussed. The chapter summarizes the equations of motion for atomic polarization, inversion and the cavity field describing their nonlinear dynamical coupling. These equations, known as the Maxwell-Bloch equations, provide a complete description of atom-field interaction in a laser. Approximations of these equations, including the rate equation approximation, to deal with different laser classes are briefly described. These will be used in the next few chapters to explore and understand the rich and varied behavior of lasers. The chapter ends with a summary of select gain media for different types of commonly used lasers.

CRC Press eBooks•Sep 23, 2026•0 citations

FORMALISMS, ANALYSIS, RESULTS AND ACCOMPLISHMENTS WITH POPULATION INVERSION OF MATERIALS

Milesa Srećković, А. А. Ионин, Aco Janičijević +4 more

During six decades of quantum electronics, a vast majority of new types of quantum generators have been developed. Although the principle of population inversion has united different ranges of electromagnetic spectra (and respective quantum generators), the existence of the title laser without the population inversion, makes that the exception had confirmed the rule, i. e. that this title deserves to be discussed further. Developing of formalisms describing the operation of quantum generators, by now have produced several approaches, which must have a quantum mechanics base. For the practical reasons, negative coefficient of absorption is acquired using classic electromagnetics as well, however for the population purposes, quantum representation must be entered. A few levels of formalisms will be set in this paper, linked to quantum generators accenting the optical portion of the spectra. The lowest level descriptions are based on lumped circuits. This could be expanded to equivalents of other physical problems, using program packages developed for the electrical engineering application purposes (Spice, etc.). Schematics are defined at the macro as well as micro equivalent levels (atomic – electronic levels). The kinetic equations with simpler approach will be considered as well as simplified laser equations based on quantum/ semi-quantum approach. The use of Fourier analysis or other appropriate transformations leads to formulating the main five laser equations which serve as the base for various working regimes of quantum generators and amplifiers (free generation regime, Q switch, synchronization, operation with filters, two modes regime, regime with losses, etc.). The Lyapunov stability theorem has to be included here, etc. For some of the chosen types of quantum generator, analytical modeling will be analyzed as well as the results of program packages developed for the lasers dynamics, regimes and parameters. The systems pumped with electronic beams (relativistic) will be considered and the nuclear physics statements discussed which must be included at the beginning, in order to consider further necessary parts of the condensed – solid state theory and laser techniques, after slowing down towards thermal energies. Existing program packages provide fast modeling and visualization of laser energy distribution, temperature, modes, etc. in active material with or without the resonator. A modeling will be performed for the specified geometries and a temperature distribution in active material will be captured during operation of a chosen laser system. Different pump geometries will be compared. Contemporary lasers with the shortest existing pulse durations demand new formalisms. Areas of nonlinear optics and quantum electrody-namics, Glauber states and similar, are areas that have to be included. Two main formalisms thermodynamical and quantum mechanical with transition probabilities using perturbation methods and secondary quantization naturally had to be complemented if the Brillouin, Raman, Compton, soliton, fiber and other lasers are included more generally.

Contemporary Materials•Jan 10, 2017•0 citations

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Coherently pumped two-frequency laser-type devices

I. R. Senitzky

A three-level system which radiates at both intermediate transition frequencies is considered to be coherently pumped at a frequency near the two-photon resonance frequency. A sharply resonant rise in the second- and third-level population is found for slight detuning of the pump from two-photon resonance. Population inversion in either transition is shown to be possible, depending on the pertinent parameters. This effect furnishes a novel method of population inversion at a frequency higher than the pump frequency. Keywords include: Laser, Laser-type devices, Coherent pumping, Three-level systems, and Quantum electronics.

Final Technical Report•Feb 1, 1985•0 citations

The Interaction of EM Waves with an Optical Media

Dae Mann Kim

The atom-field interaction is extended to the electromagnetic (EM) waves interacting with an ensemble of atoms in the optical medium. This chapter discusses the absorption, gain, and dispersion of the wave as it propagates in the medium, and describes atomic susceptibility. In the collision-dominated regime, the atom-field interaction time is much shorter than the transition time period. Hence, the electron simply ends up making a transition from one level to another with a certain probability rather than executing a full Rabi flopping. The chapter presents the operation principles of laser devices in conjunction with the population inversion and controlled emission of radiation. The laser device is based on the Bose Einstein statistics and the feedback mechanism, whereby the input wave is regenerated in cascade via the stimulated emission of radiation. The cw operation of the device produces the monochromatic light sources for use in spectroscopic studies.

Wiley eBooks•Feb 6, 2015•0 citations

Amplification and Lasing without Inversion

Paul Mandel

When an atomic system interacts with light, it can amplify the electromagnetic radiation when gain exceeds loss. This requires that transitions from the upper level to the lower level prevail over the transitions from the lower level to the upper level. If one deals with a two-level system, the only way to obtain amplification is to create a state of population inversion, i.e. the upper level must be more densely populated that the lower level. "Lasing without inversion" may be possible when part of the atoms are trapped, which removes them from the subspace of states with which the upper level can have transitions. This chapter determines to what extent population inversion is necessary to achieve amplification. Independently, amplification without inversion and lasing without inversion were predicted by Harris using a different type of atomic interference. The amplification threshold has a number of features that are reminiscent of the laser threshold.

CRC Press eBooks•May 4, 2018•0 citations
We were able to show in Chapter 3 that a medium in which we can obtain a population inversion (i.e. a situation in which the population density in the excited state is greater than that in the fundamental level) allows for optical gain of an electromagnetic wave having a frequency near to the resonant frequency of the system. By introducing feedback of the amplified signal into the medium, the system can be made to oscillate naturally, resulting in laser oscillations. To obtain this population inversion, we must introduce at least a third (and perhaps even a fourth) energy level into the system. (We saw how a two-level system under the influence of an intense pump beam will saturate with no resulting population inversion.) The aim then of this chapter is to introduce the concepts necessary to extend our two-level system into a working model capable of illustrating the phenomenon of laser oscillation. We will not spend too much time discussing atomic transition lasers as they do not figure readily in our treatment of quantum electronic properties of semiconductors. An exception will be made, however; we brush upon the particular topics of a diode pumped laser in Complement 4.E and a quantum cascade laser in Complement 13.H.
This chapter begins with a heuristic derivation of atomic population rate equations which include changes to level populations due to stimulated transitions as well as level relaxations and pump. These equations are used to study the saturation of population inversion with increasing light intensity and its dependence on the type of gain medium (three-level gain media vs. four-level gain media), lineshape and nature of line broadening (homogeneous vs inhomogeneous broadening). How saturation affects lineshape and thus gain and absorption giving rise to phenomena like power broadening and spectral hole burning is also discussed. The chapter summarizes the equations of motion for atomic polarization, inversion and the cavity field describing their nonlinear dynamical coupling. These equations, known as the Maxwell-Bloch equations, provide a complete description of atom-field interaction in a laser. Approximations of these equations, including the rate equation approximation, to deal with different laser classes are briefly described. These will be used in the next few chapters to explore and understand the rich and varied behavior of lasers. The chapter ends with a summary of select gain media for different types of commonly used lasers.
During six decades of quantum electronics, a vast majority of new types of quantum generators have been developed. Although the principle of population inversion has united different ranges of electromagnetic spectra (and respective quantum generators), the existence of the title laser without the population inversion, makes that the exception had confirmed the rule, i. e. that this title deserves to be discussed further. Developing of formalisms describing the operation of quantum generators, by now have produced several approaches, which must have a quantum mechanics base. For the practical reasons, negative coefficient of absorption is acquired using classic electromagnetics as well, however for the population purposes, quantum representation must be entered. A few levels of formalisms will be set in this paper, linked to quantum generators accenting the optical portion of the spectra. The lowest level descriptions are based on lumped circuits. This could be expanded to equivalents of other physical problems, using program packages developed for the electrical engineering application purposes (Spice, etc.). Schematics are defined at the macro as well as micro equivalent levels (atomic – electronic levels). The kinetic equations with simpler approach will be considered as well as simplified laser equations based on quantum/ semi-quantum approach. The use of Fourier analysis or other appropriate transformations leads to formulating the main five laser equations which serve as the base for various working regimes of quantum generators and amplifiers (free generation regime, Q switch, synchronization, operation with filters, two modes regime, regime with losses, etc.). The Lyapunov stability theorem has to be included here, etc. For some of the chosen types of quantum generator, analytical modeling will be analyzed as well as the results of program packages developed for the lasers dynamics, regimes and parameters. The systems pumped with electronic beams (relativistic) will be considered and the nuclear physics statements discussed which must be included at the beginning, in order to consider further necessary parts of the condensed – solid state theory and laser techniques, after slowing down towards thermal energies. Existing program packages provide fast modeling and visualization of laser energy distribution, temperature, modes, etc. in active material with or without the resonator. A modeling will be performed for the specified geometries and a temperature distribution in active material will be captured during operation of a chosen laser system. Different pump geometries will be compared. Contemporary lasers with the shortest existing pulse durations demand new formalisms. Areas of nonlinear optics and quantum electrody-namics, Glauber states and similar, are areas that have to be included. Two main formalisms thermodynamical and quantum mechanical with transition probabilities using perturbation methods and secondary quantization naturally had to be complemented if the Brillouin, Raman, Compton, soliton, fiber and other lasers are included more generally.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
A three-level system which radiates at both intermediate transition frequencies is considered to be coherently pumped at a frequency near the two-photon resonance frequency. A sharply resonant rise in the second- and third-level population is found for slight detuning of the pump from two-photon resonance. Population inversion in either transition is shown to be possible, depending on the pertinent parameters. This effect furnishes a novel method of population inversion at a frequency higher than the pump frequency. Keywords include: Laser, Laser-type devices, Coherent pumping, Three-level systems, and Quantum electronics.
The atom-field interaction is extended to the electromagnetic (EM) waves interacting with an ensemble of atoms in the optical medium. This chapter discusses the absorption, gain, and dispersion of the wave as it propagates in the medium, and describes atomic susceptibility. In the collision-dominated regime, the atom-field interaction time is much shorter than the transition time period. Hence, the electron simply ends up making a transition from one level to another with a certain probability rather than executing a full Rabi flopping. The chapter presents the operation principles of laser devices in conjunction with the population inversion and controlled emission of radiation. The laser device is based on the Bose Einstein statistics and the feedback mechanism, whereby the input wave is regenerated in cascade via the stimulated emission of radiation. The cw operation of the device produces the monochromatic light sources for use in spectroscopic studies.
When an atomic system interacts with light, it can amplify the electromagnetic radiation when gain exceeds loss. This requires that transitions from the upper level to the lower level prevail over the transitions from the lower level to the upper level. If one deals with a two-level system, the only way to obtain amplification is to create a state of population inversion, i.e. the upper level must be more densely populated that the lower level. "Lasing without inversion" may be possible when part of the atoms are trapped, which removes them from the subspace of states with which the upper level can have transitions. This chapter determines to what extent population inversion is necessary to achieve amplification. Independently, amplification without inversion and lasing without inversion were predicted by Harris using a different type of atomic interference. The amplification threshold has a number of features that are reminiscent of the laser threshold.