Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Time-scaled quantum simulation of dissipative nanoelectronics with zero gate overhead

Mateusz Przygocki, Rafał Kotas, Mariusz Zubert

Published Sep 20, 2026• 0 citations
Publisher

Abstract

Simulating open quantum systems (OQS) is essential for studying quantum thermodynamics and materials science. However, noisy intermediate-scale quantum (NISQ) devices are constrained by finite coherence times and gate infidelity. Conventional quantum simulations of amplitude-damping Lindblad dynamics require active dissipative gates and ancillary environments, leading to additional 2-qubit-gate overhead and error exposure. Recent noise-assisted methods commonly retain active control, stochastic sampling, device-specific gate engineering, or mitigation-dependent post-processing. Here, we introduce a hardware-intrinsic time-scaling method that removes the need for active dissipative gates. By mapping the processor’s energy-relaxation time ( \(T_1\) ) onto native delay instructions, our protocol introduces no additional active gates or ancillary qubits for the dissipative channel. We experimentally validate the approach on two IBM quantum architectures, using material-motivated parameter regimes of a single-excitation tight-binding model. The tested regimes include YIG-motivated magnon transport and MoS \(_2\) - and graphene-motivated optical phonon transport. For the deeper 4-qubit circuit, a calibrated depth-dependent delay schedule mitigates the observed saturation tendency. Finally, we apply the same model to a 4-qubit single-carrier relaxation example. In a controlled 2-qubit benchmark, the intrinsic-delay construction yielded lower trajectory-shape RMSE than the tested stochastic-reset and Stinespring comparators. The results support a resource-efficient route towards small-scale dissipative tight-binding emulations on NISQ processors.

DOI
10.1038/s41598-026-72156-z

Related papers

Efficient quantum simulation of open quantum system dynamics on noisy quantum computers

Shin Sun, Li-Chai Shih, Yuan‐Chung Cheng

Abstract Quantum simulation represents the most promising quantum application to demonstrate quantum advantage on near-term noisy intermediate-scale quantum (NISQ) computers, yet available quantum simulation algorithms are prone to errors and thus difficult to realize with limited circuit depth on nowadays quantum devices. Herein, we propose a novel scheme to utilize intrinsic gate errors of NISQ devices to enable controllable simulation of open quantum system dynamics without ancillary qubits or explicit bath engineering, thus turning unwanted quantum noises into useful quantum resources. Specifically, we simulate the energy transfer process in a photosynthetic dimer system on IBM-Q cloud. By employing tailored decoherence-inducing gates, we show that quantum dissipative dynamics can be simulated efficiently across coherent-to-incoherent regimes with results comparable to those of the numerically exact classical method. Moreover, we demonstrate a calibration routine that enables consistent and predictive simulations of open-quantum system dynamics in the intermediate coupling regime. This work provides a new direction for quantum advantage in the NISQ era.

arXiv:2106.12882•Physica Scripta•Jan 8, 2024•24 citations

Quantum Simulation of Dissipative Energy Transfer via Noisy Quantum Computer

Chin‐Yi Lin, Li-Chai Shih, Shin Sun +1 more

We study whether dissipative energy-transfer dynamics can be simulated on noisy near-term quantum hardware by treating device noise as a calibrated resource rather than purely as an error source. Focusing on a biased exciton dimer, we encode the single-excitation manifold into a two-qubit subspace and implement the coherent dynamics through a shallow Trotterized propagator, while repeated noisy identity operations provide an effective dissipative channel. We benchmark the resulting short-time population dynamics against the hierarchical equations of motion (HEOM), which serves as a numerically accurate reference for the corresponding open-system model. On IBM quantum hardware, the calibrated noisy circuit reproduces a broad range of dissipative trajectories in the tested regime, and the fitted HEOM parameters exhibit an approximately linear dependence on the noisy-gate frequency. This empirical relation enables a practically useful interpolation strategy: once calibrated by a finite set of HEOM calculations, the noisy circuit can replace repeated HEOM fitting for intermediate parameter points within the same biased-dimer family. To extend the dynamics beyond the circuit-depth limit, we combine the short-time quantum data with the transfer tensor method (TTM). In simulator studies, TTM accurately extends the dynamics well beyond the directly simulated window, whereas on real hardware its performance is limited by the instability of coherence-sensitive initial states. Our results show that noisy few-qubit devices can act as calibrated phenomenological simulators of open-system dynamics and, within a restricted but experimentally relevant regime, can provide a practical surrogate for repeated HEOM-based modeling.

arXiv:2312.01401•Dec 3, 2023•0 citations

Utility-scale quantum experiments using dynamic circuits to address collective dissipation in interacting qubits

Benjamin Tirado, Joana Fraxanet, Adrián Juan-Delgado +2 more

Open quantum systems are central to quantum optics, condensed matter, and chemistry, yet their simulation remains challenging for both classical and near-term quantum hardware. In this work we implement and execute utility-scale quantum circuits that accurately reproduce the dissipative dynamics of interacting qubits. We consider a one-dimensional chain of many qubits weakly coupled to a common Markovian bath. The Markovian time evolution of the system is implemented through Trotterized evolution with the introduction of ancilla-assisted dissipative channels, including single-qubit and two-qubit dissipators to capture collective decay. Mid-circuit measurements, conditional gates, and hardware-aware transpilation significantly reduce circuit depth. We further implement a biased Clifford data regression (biased CDR), an error mitigation strategy that outperforms the uniform Cliffordization baseline and a variety of zero-noise extrapolation protocols. We execute large-scale quantum experiments of the dynamics of chains comprising up to 86 emitters on the IBM System Two \texttt{ibm\_basquecountry}. In order to do so, we use 129 total qubits (including ancillas), with the largest circuits contain about 8000 two-qubit gates. To validate these experiments we develop a classical Monte Carlo-Time-Evolving Block-Decimation (MC-TEBD) tensor-network method that incorporates reset operations through stochastic pure-state trajectories, obtaining very good agreement. The approach presented here opens a practical route for utility-scale quantum simulation of dissipative dynamics, enabled by dynamic circuits, targeted error mitigation, and tensor-network validation, and enables to tackle complex dynamics of systems such as quantum emitters in dissipative optical cavities.

quant-pharXiv:2605.25830•May 26, 2026•2 citations

Mitigating Realistic Noise in Practical Noisy Intermediate-Scale Quantum Devices

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda +3 more

Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.

arXiv:2001.04891•Physical Review Applied•Mar 9, 2021•116 citations

Simulation of Lindbladian dynamics via adaptive variational quantum trajectory compression

Huan-Yu Liu, Cheng Xue, Yun-Jie Wang +5 more

Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum $XY$ model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.

quant-pharXiv:2607.09051•Quantum Science and Technology•Jul 13, 2026•0 citations

Optimized noise-assisted simulation of the Lindblad equation with time-dependent coefficients on a noisy quantum processor

José D. Guimarães, Antonio Ruiz-Molero, James Lim +3 more

Noise in quantum devices is generally considered detrimental to computational accuracy. However, the recent proposal of noise-assisted simulation has demonstrated that noise can be an asset in digital quantum simulations of open systems on noisy intermediate-scale quantum (NISQ) devices. In this context, we introduce an optimized decoherence rate control scheme that can significantly reduce computational requirements by multiple orders of magnitude, in comparison to the original noise-assisted simulation. We further extend this approach to encompass Lindblad equations with time-dependent coefficients, using only quantum error characterization and mitigation techniques. This extension allows for the perturbative simulation of non-Markovian dynamics on NISQ devices, eliminating the need for ancilla qubits or midcircuit measurements. Our contributions are validated through numerical experiments on an emulated IBM Quantum device. Overall, our paper offers valuable optimizations that bring current quantum processors closer to effectively simulating realistic open systems.

arXiv:2402.07617•Physical Review A•May 23, 2024•14 citations
Simulating open quantum systems (OQS) is essential for studying quantum thermodynamics and materials science. However, noisy intermediate-scale quantum (NISQ) devices are constrained by finite coherence times and gate infidelity. Conventional quantum simulations of amplitude-damping Lindblad dynamics require active dissipative gates and ancillary environments, leading to additional 2-qubit-gate overhead and error exposure. Recent noise-assisted methods commonly retain active control, stochastic sampling, device-specific gate engineering, or mitigation-dependent post-processing. Here, we introduce a hardware-intrinsic time-scaling method that removes the need for active dissipative gates. By mapping the processor’s energy-relaxation time ( (T_1) ) onto native delay instructions, our protocol introduces no additional active gates or ancillary qubits for the dissipative channel. We experimentally validate the approach on two IBM quantum architectures, using material-motivated parameter regimes of a single-excitation tight-binding model. The tested regimes include YIG-motivated magnon transport and MoS (_2) - and graphene-motivated optical phonon transport. For the deeper 4-qubit circuit, a calibrated depth-dependent delay schedule mitigates the observed saturation tendency. Finally, we apply the same model to a 4-qubit single-carrier relaxation example. In a controlled 2-qubit benchmark, the intrinsic-delay construction yielded lower trajectory-shape RMSE than the tested stochastic-reset and Stinespring comparators. The results support a resource-efficient route towards small-scale dissipative tight-binding emulations on NISQ processors.
Abstract Quantum simulation represents the most promising quantum application to demonstrate quantum advantage on near-term noisy intermediate-scale quantum (NISQ) computers, yet available quantum simulation algorithms are prone to errors and thus difficult to realize with limited circuit depth on nowadays quantum devices. Herein, we propose a novel scheme to utilize intrinsic gate errors of NISQ devices to enable controllable simulation of open quantum system dynamics without ancillary qubits or explicit bath engineering, thus turning unwanted quantum noises into useful quantum resources. Specifically, we simulate the energy transfer process in a photosynthetic dimer system on IBM-Q cloud. By employing tailored decoherence-inducing gates, we show that quantum dissipative dynamics can be simulated efficiently across coherent-to-incoherent regimes with results comparable to those of the numerically exact classical method. Moreover, we demonstrate a calibration routine that enables consistent and predictive simulations of open-quantum system dynamics in the intermediate coupling regime. This work provides a new direction for quantum advantage in the NISQ era.
We study whether dissipative energy-transfer dynamics can be simulated on noisy near-term quantum hardware by treating device noise as a calibrated resource rather than purely as an error source. Focusing on a biased exciton dimer, we encode the single-excitation manifold into a two-qubit subspace and implement the coherent dynamics through a shallow Trotterized propagator, while repeated noisy identity operations provide an effective dissipative channel. We benchmark the resulting short-time population dynamics against the hierarchical equations of motion (HEOM), which serves as a numerically accurate reference for the corresponding open-system model. On IBM quantum hardware, the calibrated noisy circuit reproduces a broad range of dissipative trajectories in the tested regime, and the fitted HEOM parameters exhibit an approximately linear dependence on the noisy-gate frequency. This empirical relation enables a practically useful interpolation strategy: once calibrated by a finite set of HEOM calculations, the noisy circuit can replace repeated HEOM fitting for intermediate parameter points within the same biased-dimer family. To extend the dynamics beyond the circuit-depth limit, we combine the short-time quantum data with the transfer tensor method (TTM). In simulator studies, TTM accurately extends the dynamics well beyond the directly simulated window, whereas on real hardware its performance is limited by the instability of coherence-sensitive initial states. Our results show that noisy few-qubit devices can act as calibrated phenomenological simulators of open-system dynamics and, within a restricted but experimentally relevant regime, can provide a practical surrogate for repeated HEOM-based modeling.
Open quantum systems are central to quantum optics, condensed matter, and chemistry, yet their simulation remains challenging for both classical and near-term quantum hardware. In this work we implement and execute utility-scale quantum circuits that accurately reproduce the dissipative dynamics of interacting qubits. We consider a one-dimensional chain of many qubits weakly coupled to a common Markovian bath. The Markovian time evolution of the system is implemented through Trotterized evolution with the introduction of ancilla-assisted dissipative channels, including single-qubit and two-qubit dissipators to capture collective decay. Mid-circuit measurements, conditional gates, and hardware-aware transpilation significantly reduce circuit depth. We further implement a biased Clifford data regression (biased CDR), an error mitigation strategy that outperforms the uniform Cliffordization baseline and a variety of zero-noise extrapolation protocols. We execute large-scale quantum experiments of the dynamics of chains comprising up to 86 emitters on the IBM System Two \texttt{ibm\_basquecountry}. In order to do so, we use 129 total qubits (including ancillas), with the largest circuits contain about 8000 two-qubit gates. To validate these experiments we develop a classical Monte Carlo-Time-Evolving Block-Decimation (MC-TEBD) tensor-network method that incorporates reset operations through stochastic pure-state trajectories, obtaining very good agreement. The approach presented here opens a practical route for utility-scale quantum simulation of dissipative dynamics, enabled by dynamic circuits, targeted error mitigation, and tensor-network validation, and enables to tackle complex dynamics of systems such as quantum emitters in dissipative optical cavities.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum XYXYXY model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.
Noise in quantum devices is generally considered detrimental to computational accuracy. However, the recent proposal of noise-assisted simulation has demonstrated that noise can be an asset in digital quantum simulations of open systems on noisy intermediate-scale quantum (NISQ) devices. In this context, we introduce an optimized decoherence rate control scheme that can significantly reduce computational requirements by multiple orders of magnitude, in comparison to the original noise-assisted simulation. We further extend this approach to encompass Lindblad equations with time-dependent coefficients, using only quantum error characterization and mitigation techniques. This extension allows for the perturbative simulation of non-Markovian dynamics on NISQ devices, eliminating the need for ancilla qubits or midcircuit measurements. Our contributions are validated through numerical experiments on an emulated IBM Quantum device. Overall, our paper offers valuable optimizations that bring current quantum processors closer to effectively simulating realistic open systems.