Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.25830

Utility-scale quantum experiments using dynamic circuits to address collective dissipation in interacting qubits

Benjamin Tirado, Joana Fraxanet, Adrián Juan-Delgado, Javier Aizpurua, Ruben Esteban

quant-phSubmitted May 25, 2026• Announced May 26, 2026• 2 citations
arXivHTMLPDF

Abstract

Open quantum systems are central to quantum optics, condensed matter, and chemistry, yet their simulation remains challenging for both classical and near-term quantum hardware. In this work we implement and execute utility-scale quantum circuits that accurately reproduce the dissipative dynamics of interacting qubits. We consider a one-dimensional chain of many qubits weakly coupled to a common Markovian bath. The Markovian time evolution of the system is implemented through Trotterized evolution with the introduction of ancilla-assisted dissipative channels, including single-qubit and two-qubit dissipators to capture collective decay. Mid-circuit measurements, conditional gates, and hardware-aware transpilation significantly reduce circuit depth. We further implement a biased Clifford data regression (biased CDR), an error mitigation strategy that outperforms the uniform Cliffordization baseline and a variety of zero-noise extrapolation protocols. We execute large-scale quantum experiments of the dynamics of chains comprising up to 86 emitters on the IBM System Two \texttt{ibm\_basquecountry}. In order to do so, we use 129 total qubits (including ancillas), with the largest circuits contain about 8000 two-qubit gates. To validate these experiments we develop a classical Monte Carlo-Time-Evolving Block-Decimation (MC-TEBD) tensor-network method that incorporates reset operations through stochastic pure-state trajectories, obtaining very good agreement. The approach presented here opens a practical route for utility-scale quantum simulation of dissipative dynamics, enabled by dynamic circuits, targeted error mitigation, and tensor-network validation, and enables to tackle complex dynamics of systems such as quantum emitters in dissipative optical cavities.

Related papers

Time-scaled quantum simulation of dissipative nanoelectronics with zero gate overhead

Mateusz Przygocki, Rafał Kotas, Mariusz Zubert

Simulating open quantum systems (OQS) is essential for studying quantum thermodynamics and materials science. However, noisy intermediate-scale quantum (NISQ) devices are constrained by finite coherence times and gate infidelity. Conventional quantum simulations of amplitude-damping Lindblad dynamics require active dissipative gates and ancillary environments, leading to additional 2-qubit-gate overhead and error exposure. Recent noise-assisted methods commonly retain active control, stochastic sampling, device-specific gate engineering, or mitigation-dependent post-processing. Here, we introduce a hardware-intrinsic time-scaling method that removes the need for active dissipative gates. By mapping the processor’s energy-relaxation time ( \(T_1\) ) onto native delay instructions, our protocol introduces no additional active gates or ancillary qubits for the dissipative channel. We experimentally validate the approach on two IBM quantum architectures, using material-motivated parameter regimes of a single-excitation tight-binding model. The tested regimes include YIG-motivated magnon transport and MoS \(_2\) - and graphene-motivated optical phonon transport. For the deeper 4-qubit circuit, a calibrated depth-dependent delay schedule mitigates the observed saturation tendency. Finally, we apply the same model to a 4-qubit single-carrier relaxation example. In a controlled 2-qubit benchmark, the intrinsic-delay construction yielded lower trajectory-shape RMSE than the tested stochastic-reset and Stinespring comparators. The results support a resource-efficient route towards small-scale dissipative tight-binding emulations on NISQ processors.

Scientific Reports•Sep 20, 2026•0 citations

Error Mitigation in Dynamic Circuits for Hamiltonian Simulation

Sumeet Shirgure, Siyuan Niu

Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.

quant-pharXiv:2605.05256•ACM Great Lakes Symposium on VLSI (GLSVLSI)•May 7, 2026•3 citations

Quantum utility-scale error mitigation for quantum quench dynamics in Heisenberg spin chains

Seokwon Choi, Talal Ahmed Chowdhury, Kwangmin Yu

Abstract We implement a quantum error mitigation method termed self-mitigation, which is comparable to zero-noise extrapolation, at large scales to achieve quantum utility on near-term, noisy quantum computers. We investigate the effectiveness of several quantum error mitigation strategies, including self-mitigation, by simulating quantum quench dynamics for Heisenberg spin chains with system sizes up to 104 qubits using IBM quantum processors. In particular, we discuss the limitations of zero-noise extrapolation and the advantages offered by self-mitigation at large scales. The self-mitigation method demonstrates stable accuracy with large systems of 104 qubits comprising more than 3,000 CNOT gates. Also, we combine the discussed quantum error mitigation methods with practical entanglement entropy measuring methods, and it shows a good agreement with the theoretical estimation. Our study illustrates the usefulness of near-term noisy quantum hardware in examining the quantum quench dynamics of many-body systems at large scales and lays the groundwork for surpassing classical simulations with quantum methods prior to the development of fault-tolerant quantum computers.

arXiv:2506.20125•Physica Scripta•Jan 13, 2026•10 citations

Simulating the Dynamics of Markovian Quantum Processes by Quantum Collision Models on Quantum Computers

Zeqing Wang, Julian D. Teske, Anshuman Bhardwaj +2 more

Hamiltonian dynamics have been widely implemented on noisy intermediate-scale quantum devices in recent years. In contrast, experimental demonstrations of Markovian quantum dynamics remain limited, because implementing nonunitary evolution on quantum computers is challenging. Quantum collision models provide a natural approach to this problem by coupling the system to ancillas to realize dissipation. However, previous implementations of quantum collision models on quantum computers have typically been restricted to one or two system qubits and fewer than 12 time steps, owing to noise, circuit depth, the overhead of ancilla reset, and limited qubit resources. In this work, we experimentally simulate Markovian quantum processes with local and nonlocal dissipation on both trapped-ion and superconducting quantum computers. By employing hardware-specific ancilla strategies, we realize simulations with up to seven system qubits, corresponding to 13 qubits in total, and 40 time steps. Our results demonstrate that, even for the same physical model, the optimal implementation strategy depends strongly on the hardware characteristics of the quantum computer.

quant-pharXiv:2606.27856•Jun 29, 2026•3 citations

Quantum Simulation of Dissipative Energy Transfer via Noisy Quantum Computer

Chin‐Yi Lin, Li-Chai Shih, Shin Sun +1 more

We study whether dissipative energy-transfer dynamics can be simulated on noisy near-term quantum hardware by treating device noise as a calibrated resource rather than purely as an error source. Focusing on a biased exciton dimer, we encode the single-excitation manifold into a two-qubit subspace and implement the coherent dynamics through a shallow Trotterized propagator, while repeated noisy identity operations provide an effective dissipative channel. We benchmark the resulting short-time population dynamics against the hierarchical equations of motion (HEOM), which serves as a numerically accurate reference for the corresponding open-system model. On IBM quantum hardware, the calibrated noisy circuit reproduces a broad range of dissipative trajectories in the tested regime, and the fitted HEOM parameters exhibit an approximately linear dependence on the noisy-gate frequency. This empirical relation enables a practically useful interpolation strategy: once calibrated by a finite set of HEOM calculations, the noisy circuit can replace repeated HEOM fitting for intermediate parameter points within the same biased-dimer family. To extend the dynamics beyond the circuit-depth limit, we combine the short-time quantum data with the transfer tensor method (TTM). In simulator studies, TTM accurately extends the dynamics well beyond the directly simulated window, whereas on real hardware its performance is limited by the instability of coherence-sensitive initial states. Our results show that noisy few-qubit devices can act as calibrated phenomenological simulators of open-system dynamics and, within a restricted but experimentally relevant regime, can provide a practical surrogate for repeated HEOM-based modeling.

arXiv:2312.01401•Dec 3, 2023•0 citations

Simulation of Lindbladian dynamics via adaptive variational quantum trajectory compression

Huan-Yu Liu, Cheng Xue, Yun-Jie Wang +5 more

Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum $XY$ model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.

quant-pharXiv:2607.09051•Quantum Science and Technology•Jul 13, 2026•0 citations
Open quantum systems are central to quantum optics, condensed matter, and chemistry, yet their simulation remains challenging for both classical and near-term quantum hardware. In this work we implement and execute utility-scale quantum circuits that accurately reproduce the dissipative dynamics of interacting qubits. We consider a one-dimensional chain of many qubits weakly coupled to a common Markovian bath. The Markovian time evolution of the system is implemented through Trotterized evolution with the introduction of ancilla-assisted dissipative channels, including single-qubit and two-qubit dissipators to capture collective decay. Mid-circuit measurements, conditional gates, and hardware-aware transpilation significantly reduce circuit depth. We further implement a biased Clifford data regression (biased CDR), an error mitigation strategy that outperforms the uniform Cliffordization baseline and a variety of zero-noise extrapolation protocols. We execute large-scale quantum experiments of the dynamics of chains comprising up to 86 emitters on the IBM System Two \texttt{ibm_basquecountry}. In order to do so, we use 129 total qubits (including ancillas), with the largest circuits contain about 8000 two-qubit gates. To validate these experiments we develop a classical Monte Carlo-Time-Evolving Block-Decimation (MC-TEBD) tensor-network method that incorporates reset operations through stochastic pure-state trajectories, obtaining very good agreement. The approach presented here opens a practical route for utility-scale quantum simulation of dissipative dynamics, enabled by dynamic circuits, targeted error mitigation, and tensor-network validation, and enables to tackle complex dynamics of systems such as quantum emitters in dissipative optical cavities.
Simulating open quantum systems (OQS) is essential for studying quantum thermodynamics and materials science. However, noisy intermediate-scale quantum (NISQ) devices are constrained by finite coherence times and gate infidelity. Conventional quantum simulations of amplitude-damping Lindblad dynamics require active dissipative gates and ancillary environments, leading to additional 2-qubit-gate overhead and error exposure. Recent noise-assisted methods commonly retain active control, stochastic sampling, device-specific gate engineering, or mitigation-dependent post-processing. Here, we introduce a hardware-intrinsic time-scaling method that removes the need for active dissipative gates. By mapping the processor’s energy-relaxation time ( T1T_1T1​ ) onto native delay instructions, our protocol introduces no additional active gates or ancillary qubits for the dissipative channel. We experimentally validate the approach on two IBM quantum architectures, using material-motivated parameter regimes of a single-excitation tight-binding model. The tested regimes include YIG-motivated magnon transport and MoS 2_22​ - and graphene-motivated optical phonon transport. For the deeper 4-qubit circuit, a calibrated depth-dependent delay schedule mitigates the observed saturation tendency. Finally, we apply the same model to a 4-qubit single-carrier relaxation example. In a controlled 2-qubit benchmark, the intrinsic-delay construction yielded lower trajectory-shape RMSE than the tested stochastic-reset and Stinespring comparators. The results support a resource-efficient route towards small-scale dissipative tight-binding emulations on NISQ processors.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Abstract We implement a quantum error mitigation method termed self-mitigation, which is comparable to zero-noise extrapolation, at large scales to achieve quantum utility on near-term, noisy quantum computers. We investigate the effectiveness of several quantum error mitigation strategies, including self-mitigation, by simulating quantum quench dynamics for Heisenberg spin chains with system sizes up to 104 qubits using IBM quantum processors. In particular, we discuss the limitations of zero-noise extrapolation and the advantages offered by self-mitigation at large scales. The self-mitigation method demonstrates stable accuracy with large systems of 104 qubits comprising more than 3,000 CNOT gates. Also, we combine the discussed quantum error mitigation methods with practical entanglement entropy measuring methods, and it shows a good agreement with the theoretical estimation. Our study illustrates the usefulness of near-term noisy quantum hardware in examining the quantum quench dynamics of many-body systems at large scales and lays the groundwork for surpassing classical simulations with quantum methods prior to the development of fault-tolerant quantum computers.
Hamiltonian dynamics have been widely implemented on noisy intermediate-scale quantum devices in recent years. In contrast, experimental demonstrations of Markovian quantum dynamics remain limited, because implementing nonunitary evolution on quantum computers is challenging. Quantum collision models provide a natural approach to this problem by coupling the system to ancillas to realize dissipation. However, previous implementations of quantum collision models on quantum computers have typically been restricted to one or two system qubits and fewer than 12 time steps, owing to noise, circuit depth, the overhead of ancilla reset, and limited qubit resources. In this work, we experimentally simulate Markovian quantum processes with local and nonlocal dissipation on both trapped-ion and superconducting quantum computers. By employing hardware-specific ancilla strategies, we realize simulations with up to seven system qubits, corresponding to 13 qubits in total, and 40 time steps. Our results demonstrate that, even for the same physical model, the optimal implementation strategy depends strongly on the hardware characteristics of the quantum computer.
We study whether dissipative energy-transfer dynamics can be simulated on noisy near-term quantum hardware by treating device noise as a calibrated resource rather than purely as an error source. Focusing on a biased exciton dimer, we encode the single-excitation manifold into a two-qubit subspace and implement the coherent dynamics through a shallow Trotterized propagator, while repeated noisy identity operations provide an effective dissipative channel. We benchmark the resulting short-time population dynamics against the hierarchical equations of motion (HEOM), which serves as a numerically accurate reference for the corresponding open-system model. On IBM quantum hardware, the calibrated noisy circuit reproduces a broad range of dissipative trajectories in the tested regime, and the fitted HEOM parameters exhibit an approximately linear dependence on the noisy-gate frequency. This empirical relation enables a practically useful interpolation strategy: once calibrated by a finite set of HEOM calculations, the noisy circuit can replace repeated HEOM fitting for intermediate parameter points within the same biased-dimer family. To extend the dynamics beyond the circuit-depth limit, we combine the short-time quantum data with the transfer tensor method (TTM). In simulator studies, TTM accurately extends the dynamics well beyond the directly simulated window, whereas on real hardware its performance is limited by the instability of coherence-sensitive initial states. Our results show that noisy few-qubit devices can act as calibrated phenomenological simulators of open-system dynamics and, within a restricted but experimentally relevant regime, can provide a practical surrogate for repeated HEOM-based modeling.
Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum XYXYXY model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.