Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Microwave and Millimeter Wave Technology (ICMMT)

A 4–8 GHz GaAs LNA with 15K Noise Temperature for Superconducting Qubit Readout

Zhe Wang, Ruihao Yin, Hua Chen

Published May 1, 2026• 0 citations
Publisher

Abstract

This paper presents a cryogenic low-noise amplifier designed for superconducting qubit readout in quantum computing systems. The proposed LNA adopts a three-stage cascaded to achieve a balanced trade-off between gain and noise. Moreover, optimized inter-stage matching is also used. At 300K, the LNA exhibits a bandwidth of 4–8 GHz with a gain ranging from 33 to 35 dB, and a noise figure of 1.5 dB at 6 GHz. At 4K, it delivers over 32 dB gain across 4-8 GHz with noise temperature below 20K (minimum 15K), while power only 12 mW. Additionally, this C-band cryogenic MMIC LNA is designed in a 250 nm GaAs pHEMT process.

DOI
10.1109/icmmt69626.2026.11678339

Related papers

A C-band cryogenic gallium arsenide low-noise amplifier for quantum applications

Ziqing Guo, Daxiong Sun, Peisheng Huang +16 more

Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNAs) for qubit readout. Here we presented a C-band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on a 150 nm gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance matching to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third stages enhances the overall stability. Moreover, the pHEMT self-bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only a single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a minimum noise temperature of 4 K and an average gain of 40 dB. We further benchmarked this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.

arXiv:2412.19477•Chip•Apr 6, 2025•3 citations

A 1.15 mW SiGe BiCMOS Cryogenic LNA for Superconducting Qubit Readout with 4.5 K Noise Temperature From 4 to 9 GHz

Aleksei Nerushenko, Roc Berenguer, Alvaro Urain +1 more

This work presents the design and post-layout simulation of a cryogenic SiGe BiCMOS low-noise amplifier (LNA) for superconducting transmon-qubit readout in quantum processors scaling beyond hundreds of qubits. The target specifications are first established and justified by surveying state-of-the-art of cryogenic LNAs and modeling the dispersive qubit readout process. The LNA is implemented with three cascaded stages in common-emitter configuration and employs tuned inductive matching and parallel peaking networks in each stage to optimize noise, gain flatness, and bandwidth while maintaining minimal DC power consumption. The amplifier draws only 1.15 mW from a 0.15 V supply and occupies$0.252 \text{mm}^{2}$. Post-layout simulations confirm input/output S-parameter matching better than$-10 \text{dB}, 41-44 \text{dB}$gain with$<3 \text{dB}$ripple,$<5 \mathrm{K}$noise temperature across$4-9 \text{GHz}$, and a worst-case OP1 dB compression point of$\mathbf{- 1 9. 9 6. 6 d B m}$. A comparative analysis demonstrates that SiGe BiCMOS offers a favorable trade-off between InP HEMT's low noise and CMOS's integration potential for large-scale quantum processors.

Conference on Design of Circuits and Integrated Systems•Nov 26, 2025•1 citation

Design of a Low-Noise Amplifier for Qubit Readout

Gabriel López-Pinar, Uxua Esteban Eraso, Santiago Celma +1 more

This work presents the design and optimization of a low-noise amplifier (LNA) for qubit readout in cryogenic environments of 3 − 4 K. The proposed LNA achieves wide bandwidth (4 GHz), high gain (47.0 dB), and sufficient linearity (IIP 3 = −34 dBm), while maintaining power consumption below 50 mW, making it suitable for integration into quantum computing systems. The amplifier is based on multi-stage cascode architectures with integrated inductances and impedance-matching techniques to optimize performance for a centre frequency of 5 GHz. While the results demonstrate good performance, there is still room for improvement in the S11parameter and the noise figure (NF ), which could benefit from a more refined transformer model. The proposed design represents a significant step toward integrating high-efficiency readout electronics into quantum computing architectures.

International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design•Jul 7, 2025•1 citation

A 3.5~7.5 GHz GaAs HEMT Cryogenic Low-NoiseAmplifier Achieving 5 Kelvin Noise Temperature for Qubits Measurement

Yatao Peng, Youpeng Zhong, Zechen Guo +2 more

The measurement of the fast-increasing number of qubits necessitates the use of a large number of specialized cryogenic low-noise amplifiers (LNAs).). This work presents a broadband LNA designed with discrete GaAs HEMT components which operate well at ~3.6 K temperature. The dual-frequency optimum noise matching network and output matching elements of the first stage were employed to optimize the equivalent noise temperature (NT) and the input return loss in a wideband. Measurement results at 3.6 K ambient temperature show that the LNA achieved an equivalent NT of30 dB in the 3.5 GHz to 7.5 GHz band with a minimum of 5 Kelvin at ~6.5 GHz. The best visibility of ~0.891 is achieved when using the LNA to observe a superconducting transmon qubit without using a JPA.

IEEE MTT-S International Microwave Symposium digest•Jun 11, 2023•9 citations

A 7.3–9.5-GHz Cryogenic LNA Based on Passive Noise Cancellation for Qubit State Readout

Yaoyu Li, Yanshu Guo, Tian Tian +4 more

A cryogenic low-voltage, broadband low-noise amplifier(LNA) has been designed for qubit state readout systems. The proposed LNA utilizes passive components for noise cancellation. A tri-coupled transformer is utilized to simultaneously achieve broadband input impedance matching and noise matching. Additionally, it incorporates capacitive feedback and an in-phase transformer to effectively cancel noise. Implemented in 28-nm bulk CMOS technology and verified at 10 K, the LNA achieves a maximum gain of 26.7 dB, a −3-dB bandwidth of 2.2 GHz, a lowest noise temperature (NT) of 25 K, a power consumption of 4.05 mW at 0.6-V supply voltage, and a figure of merit (FoM) of 0.12 dB/mW/ph, which is comparable with the recent works.

IEEE Microwave and Wireless Technology Letters•May 26, 2025•2 citations

An Ultrawideband Cryogenic LNA in 40-nm CMOS for Multiple Spin/Superconducting Qubit Readout

Mahesh Kumar Chaubey, Yin‐Cheng Chang, Po‐Chang Wu +2 more

This letter presents an ultrawideband cryogenic low-noise amplifier (LNA) with current reuse and stacked inverter-based input-referred noise (IRN) cancellation in 40-nm CMOS. The first stage utilizes an IRN reduction high-$Q$gate inductor with current reuse, a stacked inverter-based shunt-resistive feedback input stage, and a cryogenically aware back-gate biasing technique to regulate the threshold voltage under cryogenic operation. The second stage is the common-source (CS) main amplifier, followed by a cascode current-reuse auxiliary amplifier to suppress the channel thermal noise of the main amplifier. The third stage is the current-reuse CS inverter-based postamplifier buffer stage. At 4 K, the LNA achieves a measured peak gain (${S} _{21}$) of 37 dB, with a large 3-dB bandwidth (BW) from 0.15 to 8 GHz and aNFminof 0.4 dB at 3.2 GHz under${P} _{\mathrm {DC}}$of 13.2 mW. To our knowledge, the proposed LNA achieves the BW bandwidth and the figure of merit (FoM) among the highest compared to published CMOS LNAs operating at 4 K. The proposed LNA is suitable for both spin and superconducting qubit readout.

IEEE Microwave and Wireless Technology Letters•Nov 24, 2025•2 citations
This paper presents a cryogenic low-noise amplifier designed for superconducting qubit readout in quantum computing systems. The proposed LNA adopts a three-stage cascaded to achieve a balanced trade-off between gain and noise. Moreover, optimized inter-stage matching is also used. At 300K, the LNA exhibits a bandwidth of 4–8 GHz with a gain ranging from 33 to 35 dB, and a noise figure of 1.5 dB at 6 GHz. At 4K, it delivers over 32 dB gain across 4-8 GHz with noise temperature below 20K (minimum 15K), while power only 12 mW. Additionally, this C-band cryogenic MMIC LNA is designed in a 250 nm GaAs pHEMT process.
Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNAs) for qubit readout. Here we presented a C-band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on a 150 nm gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance matching to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third stages enhances the overall stability. Moreover, the pHEMT self-bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only a single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a minimum noise temperature of 4 K and an average gain of 40 dB. We further benchmarked this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.
This work presents the design and post-layout simulation of a cryogenic SiGe BiCMOS low-noise amplifier (LNA) for superconducting transmon-qubit readout in quantum processors scaling beyond hundreds of qubits. The target specifications are first established and justified by surveying state-of-the-art of cryogenic LNAs and modeling the dispersive qubit readout process. The LNA is implemented with three cascaded stages in common-emitter configuration and employs tuned inductive matching and parallel peaking networks in each stage to optimize noise, gain flatness, and bandwidth while maintaining minimal DC power consumption. The amplifier draws only 1.15 mW from a 0.15 V supply and occupies0.252mm20.252 \text{mm}^{2}0.252mm2. Post-layout simulations confirm input/output S-parameter matching better than−10dB,41−44dB-10 \text{dB}, 41-44 \text{dB}−10dB,41−44dBgain with<3dB<3 \text{dB}<3dBripple,<5K<5 \mathrm{K}<5Knoise temperature across4−9GHz4-9 \text{GHz}4−9GHz, and a worst-case OP1 dB compression point of−19.96.6dBm\mathbf{- 1 9. 9 6. 6 d B m}−19.96.6dBm. A comparative analysis demonstrates that SiGe BiCMOS offers a favorable trade-off between InP HEMT's low noise and CMOS's integration potential for large-scale quantum processors.
This work presents the design and optimization of a low-noise amplifier (LNA) for qubit readout in cryogenic environments of 3 − 4 K. The proposed LNA achieves wide bandwidth (4 GHz), high gain (47.0 dB), and sufficient linearity (IIP 3 = −34 dBm), while maintaining power consumption below 50 mW, making it suitable for integration into quantum computing systems. The amplifier is based on multi-stage cascode architectures with integrated inductances and impedance-matching techniques to optimize performance for a centre frequency of 5 GHz. While the results demonstrate good performance, there is still room for improvement in the S11parameter and the noise figure (NF ), which could benefit from a more refined transformer model. The proposed design represents a significant step toward integrating high-efficiency readout electronics into quantum computing architectures.
The measurement of the fast-increasing number of qubits necessitates the use of a large number of specialized cryogenic low-noise amplifiers (LNAs).). This work presents a broadband LNA designed with discrete GaAs HEMT components which operate well at ~3.6 K temperature. The dual-frequency optimum noise matching network and output matching elements of the first stage were employed to optimize the equivalent noise temperature (NT) and the input return loss in a wideband. Measurement results at 3.6 K ambient temperature show that the LNA achieved an equivalent NT of30 dB in the 3.5 GHz to 7.5 GHz band with a minimum of 5 Kelvin at ~6.5 GHz. The best visibility of ~0.891 is achieved when using the LNA to observe a superconducting transmon qubit without using a JPA.
A cryogenic low-voltage, broadband low-noise amplifier(LNA) has been designed for qubit state readout systems. The proposed LNA utilizes passive components for noise cancellation. A tri-coupled transformer is utilized to simultaneously achieve broadband input impedance matching and noise matching. Additionally, it incorporates capacitive feedback and an in-phase transformer to effectively cancel noise. Implemented in 28-nm bulk CMOS technology and verified at 10 K, the LNA achieves a maximum gain of 26.7 dB, a −3-dB bandwidth of 2.2 GHz, a lowest noise temperature (NT) of 25 K, a power consumption of 4.05 mW at 0.6-V supply voltage, and a figure of merit (FoM) of 0.12 dB/mW/ph, which is comparable with the recent works.
This letter presents an ultrawideband cryogenic low-noise amplifier (LNA) with current reuse and stacked inverter-based input-referred noise (IRN) cancellation in 40-nm CMOS. The first stage utilizes an IRN reduction high-QQQgate inductor with current reuse, a stacked inverter-based shunt-resistive feedback input stage, and a cryogenically aware back-gate biasing technique to regulate the threshold voltage under cryogenic operation. The second stage is the common-source (CS) main amplifier, followed by a cascode current-reuse auxiliary amplifier to suppress the channel thermal noise of the main amplifier. The third stage is the current-reuse CS inverter-based postamplifier buffer stage. At 4 K, the LNA achieves a measured peak gain (S21{S} _{21}S21​) of 37 dB, with a large 3-dB bandwidth (BW) from 0.15 to 8 GHz and aNFminof 0.4 dB at 3.2 GHz underPDC{P} _{\mathrm {DC}}PDC​of 13.2 mW. To our knowledge, the proposed LNA achieves the BW bandwidth and the figure of merit (FoM) among the highest compared to published CMOS LNAs operating at 4 K. The proposed LNA is suitable for both spin and superconducting qubit readout.