Abstract Reproducible low-loss microwave interconnects are essential for scaling modular superconducting quantum processors and networks. Wire bonds provide a simple and flexible route to galvanic connections in such systems, but their microwave loss and reproducibility at millikelvin temperatures remain insufficiently quantified. Here we demonstrate reproducible low-loss aluminum wire-bond interconnects in both superconducting cable resonators and planar tantalum resonators. In the cable devices, a wire-bond connection is placed at the midpoint of a high-quality resonator, where the different current distributions of odd and even modes separate connection-induced loss from intrinsic cable dissipation within the same device. Across devices fabricated with different bond numbers and ultrasonic powers, a stable bonding window yields no resolvable connection resistance above the practical resolution of order 0.1 m Ω . Measurements of planar resonators on two chips independently show no systematic degradation of the internal quality factor from wire-bond ground terminations within the device-to-device variation. These results establish aluminum wire bonding as a reproducible low-loss interconnect for superconducting microwave circuits, supporting the scalable assembly of modular superconducting quantum processors and networks.
Abstract Reproducible low-loss microwave interconnects are essential for scaling modular superconducting quantum processors and networks. Wire bonds provide a simple and flexible route to galvanic connections in such systems, but their microwave loss and reproducibility at millikelvin temperatures remain insufficiently quantified. Here we demonstrate reproducible low-loss aluminum wire-bond interconnects in both superconducting cable resonators and planar tantalum resonators. In the cable devices, a wire-bond connection is placed at the midpoint of a high-quality resonator, where the different current distributions of odd and even modes separate connection-induced loss from intrinsic cable dissipation within the same device. Across devices fabricated with different bond numbers and ultrasonic powers, a stable bonding window yields no resolvable connection resistance above the practical resolution of order 0.1 m Ω . Measurements of planar resonators on two chips independently show no systematic degradation of the internal quality factor from wire-bond ground terminations within the device-to-device variation. These results establish aluminum wire bonding as a reproducible low-loss interconnect for superconducting microwave circuits, supporting the scalable assembly of modular superconducting quantum processors and networks.
Superconducting coaxial cables represent critical communication channels for interconnecting superconducting quantum processors. Here, we report mechanically-intermixed indium joins to aluminum coaxial cables for low loss quantum interconnects. We describe an ABCD matrix formalism to characterize the total resonator internal quality factor (Qi) and any contact (Rcont) or shunt resistance (Rshunt) associated with the mechanically-intermixed indium joins. We present four resonator test systems incorporating three indium join methods over the typical frequency range of interest (3-5.5GHz) at temperatures below 20mK. We measure high internal quality factor aluminum cables (Qi=1.55±0.37x106) through a push-to-connect indium join of the outer conductor that capacitively couples the inner conductor for reflection measurements. We then characterize the total internal quality factors of modes of a cable resonator with a push-to-connect superconducting cable-splice at the midpoint to find mean Qi=1.40x106 and Qi=9.39x105 for even and odd-modes respectively and use an ABCD matrix model of the system to extract Rcont=6x10−4Ω for the indium join of the inner conductor. Finally, we demonstrate indium press-mold cable-to-chip connections where the cable-to-chip join is placed at a current node and voltage node through varying on-chip waveguide lengths with mean Qi=1.24x106 and Qi=1.07x106 respectively to extract Rcont=8.5x10−4Ω and Rshunt=1.3x107Ω for the interface. With these techniques, we demonstrate a set of low-loss methods to join superconducting cables for future quantum
Abstract Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5 × 106 at high powers and 2 × 106 (with the best value of 4.4 × 106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7–10.5 um center trace on high-resistivity silicon substrates commonly used in Josephson-junction based quantum circuit. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges’ positions and extra process steps on the overall dielectric losses. The best quality factors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.
Low-loss cavities are important in building high-coherence superconducting quantum computers. Generating high-quality joints between parts is crucial for the realization of a scalable quantum computer using the circuit quantum electrodynamics (cQED) framework. In this paper, we adapt the technique of indium bump bonding to cQED to realize high-quality superconducting microwave joints between chips. We use this technique to fabricate compact superconducting cavities in the multilayer microwave integrated quantum circuit (MMIQC) architecture and achieve single photon quality factors over 300 × 106 or single-photon lifetimes approaching 5 ms. To quantify the performance of the resulting seam, we fabricate microwave stripline resonators in multiple sections connected by different numbers of bonds, resulting in a wide range of seam admittances. The measured quality factors combined with the designed seam admittances allow us to bound the conductance of the seam at gseam≥2×1010/(Ω m). Such a conductance should enable the construction of micromachined superconducting cavities with a quality factor of at least a billion. These results demonstrate the capability to construct very high-quality microwave structures within the MMIQC architecture.
High Resolution Image Download MS PowerPoint Slide The performance and scalability of superconducting quantum circuits are fundamentally constrained by nonequilibrium quasiparticles, which induce microwave losses that limit resonator quality factors and qubit coherence times. Understanding and mitigating these excitations is therefore central to advancing scalable quantum technologies. Here, we demonstrate on-chip microwave sensing of quasiparticles in high- Q α -tantalum coplanar waveguide resonators on silicon, operated in the single-photon regime. Temperature-dependent measurements reveal persistent nonequilibrium quasiparticles at millikelvin temperatures, producing a measurable suppression of the internal quality factor ( Q i ) relative to theoretical expectations. By benchmarking across materials, we find that the quasiparticle density in α-Ta is approximately one-third that of NbN at equivalent normalized temperatures ( T / T c ), directly correlating with reduced microwave loss. Our methodology establishes a scalable platform for probing quasiparticle dynamics and points toward new routes for engineering superconducting circuits with improved coherence, with impact on qubit readout resonators, kinetic-inductance detectors, and emerging quantum processors and sensors.
Modular quantum architecture requires long-distance quantum interconnects to stitch together individual processor modules. Such interconnects, long-distance couplers or L-couplers, must support coherent quantum operation over meter-scale distances and scale to multiple connections between any two modules. Here we demonstrate four L-couplers operating between two 120-qubit IBM Nighthawk R1 superconducting qubit processors. Each L-coupler joins two Nighthawk lattice qubits through two frequency-tunable L-qubits, two RF-SQUID based "i2m" couplers, and 80 cm of superconducting aluminum coax. Each cable installs perpendicular to the processor surface, to enable denser connections, and is joined to the chip by an indium-to-indium room temperature pressure bond made after both modules were mounted. L-coupler modes near 5 GHz, with internal quality factors of 0.86 to 1.09e6, carry relay-based state transfer at a mean network benchmarking fidelity of 99.00%, with a best link of 99.29 +/- 0.07%. We then realize distant CZ gates between lattice qubits in separate modules at a mean fidelity of 94.75%, with a best link of 96.42 +/- 0.28%, and use them to generate entangled states across the two processors, including a demonstration of simultaneous Bell pair generation using two adjacent L-couplers. These four high-fidelity L-couplers establish a practical path to scalable quantum interconnects for modular quantum computing.
Since superconducting quantum computers use microwave signals to control and readout their qubits, microwave transmission lines and circuits that can be used under cryogenic conditions are required. For microwave transmission lines, thermal insulation is essential to enhance wiring density and to prevent parasitic heating that can lead to increased computational errors. Thus, here we design and characterize a scalable, thermally insulated microwave transmission line. The transmission line designed for superconducting qubit readout at 5 GHz band achieves both thermal insulation and low loss, by employing resonator-based impedance matching in a microstripline structure. A flexible cable including eight planar transmission lines was designed, fabricated and characterized using S-parameter measurement, demonstrating low crosstalk below 40dB and signal attenuation of -23.5±0.07dB; this coincides with electromagnetic simulations. These microwave properties remained stable across a wide temperature range from room temperature down to 4 K, including steep gradients. The integration of chip attenuators further reduces thermal noise and protects sensitive cryogenic components. Our approach offers a promising solution for compact, high-density microwave wiring using flat cables under thermal gradients, necessary for large scale quantum computing.