arXiv:2610.29986
Meter-scale quantum interconnects between large quantum processors
Neereja M. Sundaresan, Nicholas Cotaj, Yadav Prasad Kandel, Eric Lewandowski, Christian Robert Longton, Yves Martin, Jae-woong Nah, Kathryn Pooley, Martin Sandberg, Michael Scanlon, Chi Xiong, Emanuil Sashev Yanev, David Abraham, Abhinandan Antony, Vincent Arena, Nicholas Bornman, Khanh Dang, Oliver Dial, Christopher Guarino, Gabriel Haspil, Jared Hertzberg, Kentaro Heya, Swetha Kamlapurkar, Michael Karschner, George Keefe, Eric Liniger, Laura Luo, Thomas G. McConkey, David Olson, Jason Orcutt, Dmitry Ovchinnikov, Timothy Phung, Sankeerth Rajalingam, Michael Selvanayagam, William Shanks, Dongbing Shao, Abigail Shearrow, Adam Stabile, Jiri Stehlik, Joseph Suttle, Jeng-Bang Yau, Eric Zhang
Abstract
Modular quantum architecture requires long-distance quantum interconnects to stitch together individual processor modules. Such interconnects, long-distance couplers or L-couplers, must support coherent quantum operation over meter-scale distances and scale to multiple connections between any two modules. Here we demonstrate four L-couplers operating between two 120-qubit IBM Nighthawk R1 superconducting qubit processors. Each L-coupler joins two Nighthawk lattice qubits through two frequency-tunable L-qubits, two RF-SQUID based "i2m" couplers, and 80 cm of superconducting aluminum coax. Each cable installs perpendicular to the processor surface, to enable denser connections, and is joined to the chip by an indium-to-indium room temperature pressure bond made after both modules were mounted. L-coupler modes near 5 GHz, with internal quality factors of 0.86 to 1.09e6, carry relay-based state transfer at a mean network benchmarking fidelity of 99.00%, with a best link of 99.29 +/- 0.07%. We then realize distant CZ gates between lattice qubits in separate modules at a mean fidelity of 94.75%, with a best link of 96.42 +/- 0.28%, and use them to generate entangled states across the two processors, including a demonstration of simultaneous Bell pair generation using two adjacent L-couplers. These four high-fidelity L-couplers establish a practical path to scalable quantum interconnects for modular quantum computing.
AI Summary
The paper addresses how to implement multiple meter-scale coherent interconnects compatible with large superconducting processors. It connects two 120-qubit Nighthawk R1 chips using four 80-cm aluminum coaxial links, each interfaced through dedicated tunable transmons and RF-SQUID-derived couplers. Perpendicular cable-to-chip indium pressure bonds are assembled after mounting the modules; only a subset of processor qubits is wired and measured. Cable modes near 5 GHz have inferred internal quality factors $Q_i=0.86$–$1.09\times10^6$. Relay-based state transfer, characterized by network benchmarking that removes state-preparation and measurement errors, averages 99.00% fidelity, with a best link of $99.29\pm0.07\%$. Distant lattice-qubit CZ gates combine two transfers, three local CZs and single-qubit operations; randomized benchmarking gives 94.75% mean fidelity and $96.42\pm0.28\%$ best fidelity. Distributed four- and six-qubit GHZ states have unmitigated fidelities of $77.23\pm0.67\%$ and $67.67\pm0.66\%$, respectively, certifying genuine multipartite entanglement. Simultaneous Bell-pair generation is demonstrated on two neighboring links, although one pair’s readout-mitigated fidelity falls by approximately 6.4 percentage points. Standalone tests identify cooldown magnetic fields as a cable-loss source and motivate magnetic shielding; connection testers show little measurable added joint loss, and assembled links survive three thermal cycles. Limitations include L-qubit dephasing, incomplete-transfer residual populations, readout errors and poorer cable quality in the bundled assembly than in standalone tests. Phenomenological error budgets account for 77% of transfer error and 74% of the best distant-CZ error. Higher-fidelity projections are not demonstrated, the magnetic-loss mechanism remains unresolved, and remating is not tested.
Error found: The reported cable-mode internal quality factors do not match Q = 2πfT1 evaluated from the tabulated frequencies and lifetimes, and no loading correction or separate measurement is specified to explain the discrepancy. The claimed GHZ harmonic suppression factors of 140 and 85 disagree with the tabulated amplitudes, which give approximately 347 and 142. Extended Data Table 2 fails to label its directional percentage entries as transfer infidelities, although averaging them and subtracting from 100 reproduces the reported transfer fidelities.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 11 pages, 3 figures, 1 table, plus Extended Data