Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ACS Omega

Physics-Informed Machine Learning Correction of Variational Quantum Eigensolver Energies for Molecular Ground States

Kantipudi Charan Sai Sree, S. P. Vijayalakshmi

Published Sep 3, 2026• 0 citations
Publisher

Abstract

Abstract The variational quantum Eigensolver (VQE) provides a scalable route to molecular ground-state energies on near-term quantum hardware, but its accuracy degrades rapidly as system size grows because hardware-efficient ansätze cannot span the full correlation subspace. We introduce a physics-informed ridge regression correction that is trained on the difference between VQE and Hartree–Fock (HF) energies and applied as a postprocessing step requiring no additional quantum resources. The feature set─the VQE–HF energy gap ΔE, its square ΔE2, the active-space qubit count, the number of active electrons, and two cross-term interactions─captures the dominant drivers of ansatz error in a low-dimensional, interpretable form. The model is benchmarked on H2, H2O, NH3, CH4, C2H6, and CH3OH using the STO-3G basis set and a state vector VQE simulator using a two-layer Ry-CNOT hardware-efficient ansatz. To assess cross-molecule generalizability, the corrected framework is further tested on CO2, N2, and HCN under both untrained and trained conditions. Absolute energy errors fall from a range of 0.02–0.79 Ha (raw VQE) to 0.0007–0.094 Ha after correction, corresponding to improvement factors of 3× to 640× relative to CASCI reference values. Zero-shot generalization tests yield factors of 9–58×, and including molecules in training improves results by a further order of magnitude in several cases. The three extended molecules exhibit improvement factors of 4–6× in untrained settings and 5–6× after training, providing preliminary evidence of transferability across chemically distinct systems. These findings suggest that the VQE–HF energy gap encodes physically transferable information about correlation-energy saturation, and that even the smallest training set can produce practically useful corrections for near-term quantum chemistry.

DOI
10.1021/acsomega.6c04374

Related papers

Benchmarking a Hardware-Efficient Variational Quantum Eigensolver for Ground-State Energies and Potential Energy Curves of Nine Small Molecules against Exact Active-Space and Full Configuration Interaction References

Nambury Surendra Babu

Abstract The variational quantum eigensolver (VQE) is the leading near-term quantum algorithm for molecular ground states, but its accuracy is often reported with inconsistent reference values and metrics. We present a reproducible benchmark of a hardware-efficient VQE ansatz (R Y –R Z rotations with linear CNOT entanglement) for H 2 , HeH + , LiH, BeH 2 , H 2 O, NH 3 , CH 4 , CO 2 and N 2 in the STO-3G basis. Hamiltonians were generated with PySCF and Qiskit Nature, encoded with the parity mapping and two-qubit reduction on 2, 4 or 6 qubits, and minimised with SLSQP and analytic gradients in noiseless statevector simulations, with a penalty term enforcing the correct electron number. Energies are compared with exact active-space (CASCI) and all-electron full configuration interaction (FCI) references in the same basis, at experimental geometries and along potential energy curves (144 geometries in total). For the two- and four-qubit systems, VQE reproduces the exact energies, potential energy curves, bond lengths and harmonic frequencies to numerical precision. For the six-qubit systems the equilibrium errors are 0.3–7.5 mE h and reach 51.1 mE h along the curves, so chemical accuracy (1.6 mE h ) is reached only for H 2 O and CH 4 ; increasing the depth to reps = 4–6 (20–30 CNOTs) restores chemical accuracy at equilibrium, and UCCSD reaches chemical accuracy for all nine molecules but requires 476 instead of 15 CNOT gates. Active-space truncation errors (1–139 mE h ) exceed the VQE errors, and deviations of STO-3G bond lengths from experiment (up to 0.14 Å) are basis-set effects shared by FCI. The results show why VQE errors should be reported in absolute terms against exact references for the same Hamiltonian, and they provide a baseline for evaluating noise-aware and symmetry-preserving ansätze.

•Nov 10, 2026•0 citations

Molecular Ground-State Energy Estimation Using VQE

Enoth Kumar N, Irene S, Vinod Jani +2 more

Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:$\mathrm{H}_{2}, \mathrm{H}_{3}^{+}, \text{LiH}, \text{HF}, \text{OH}^{-}, \mathrm{H}_{2} \mathrm{O}, \text{BH}_{3}, \text{CH}_{4}$, and$\text{NH}_{3}$. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.

IEEE Pune Section International Conference (PuneCon)•Dec 12, 2025•1 citation

Parallelized Givens Ansatz for Molecular Ground States: Bridging Accuracy and Efficiency on NISQ Platforms

M. R. Nirmal, Ankit Khandelwal, Manoj Karunakaran Nambiar +1 more

In recent years, the Variational Quantum Eigensolver (VQE) has emerged as one of the most popular algorithms for solving the electronic structure problem on near-term quantum computers. The utility of VQE is often hindered by the limitations of current quantum hardware, including, but not limited to, short qubit coherence times and low gate fidelities. These limitations become particularly pronounced when VQE is used along with deep quantum circuits, such as those required by the ”Unitary Coupled Cluster Singles and Doubles” (UCCSD) ansatz, often resulting in significant errors. To address these issues, we propose a low-depth ansatz based on parallelized Givens rotations, which can recover substantial correlation energy while drastically reducing circuit depth and two-qubit gate counts for an arbitrary active space (AS). Also, considering the current hardware architectures with low qubit counts, we introduce a systematic way to select molecular orbitals to define active spaces (ASs) that retain significant electron correlation. We validate our approach by computing bond dissociation profiles of water and strongly correlated systems, such as molecular nitrogen and oxygen, across various ASs. Noiseless simulations using the new ansatz yield ground-state energies comparable to those from the UCCSD ansatz while reducing circuit depth by 50–70%. Moreover, in noisy simulations, our approach achieves energy error rates an order of magnitude lower than that of UCCSD. Considering the efficiency and practical usage of our ansatz, we hope that it becomes a potential choice for performing quantum chemistry calculations on near-term quantum devices.

arXiv:2504.18264•The Journal of Physical Chemistry A•Nov 7, 2025•5 citations

A Unified Benchmarking Study of Variational Quantum Eigensolver Ansatz for Electronic Structure Problems

Julie Maria Raju, Abhoy Kole, Julen Larrucea +3 more

Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like $H_2$, $LiH$, $N_2$. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for $H_2$ and $LiH$, and fails for $N_2$, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.

arXiv:2611.15365•Nov 11, 2026•0 citations

Simulation of Potential Energy Curves for H₂ and LiH Molecules Using the Variational Quantum Eigensolver: A Comparative Study of Ideal and Noisy Quantum Hardware Conditions on Qiskit

Rudrapriyo Sengupta

This study investigates the Variational Quantum Eigensolver (VQE), a hybrid quantum-classical algorithm that partitions the computational workload between a quantum processing unit and a classical optimiser to determine the ground-state energies of molecular systems. The Qiskit SDK v1.x framework is employed, utilising the PySCFDriver module within the qiskit-nature package to construct second-quantised molecular electronic Hamiltonians for two representative systems: Hydrogen ( ) and Lithium Hydride ( ). For the complete active space is retained without spatial reduction, mapping the full Hamiltonian onto a 4-qubit register. However for the full STO-3G representation demands 12 qubits, rendering direct classical parameter optimisation computationally intractable. This bottleneck is resolved by applying an ActiveSpaceTransformer (num_electrons=2, num_spatial_orbitals=3) to freeze the chemically inactive lithium core electrons, reducing the active register to 6 qubits. Fermionic operators are subsequently converted to Pauli strings via the Jordan-Wigner transformation ( ) enabling the quantum processor to evaluate the molecular Hamiltonian as a circuit while preserving the fermionic anti-commutation relations. Under ideal, noise-free simulation using the StatevectorEstimator primitive paired with the COBYLA optimiser (maxiter=200), all VQE energy points converge precisely onto the Full Configuration Interaction (FCI) classical baseline across the full range of interatomic separations. This confirms that the hardware-efficient TwoLocal ansatz ( rotation layers and entanglement layers with reps=3) possesses sufficient expressive power to capture the molecular ground-state wavefunction. Introducing gate-level noise through AerSimulator backends calibrated from the FakeManilaV2 and FakeNairobiV2 hardware profiles—with optimisation driven by the SPSA algorithm (maxiter=150)—reveals two critical failure modes. A systematic upward energy bias is observed, attributable to depolarising gate errors and measurement readout faults that prevent the optimiser from reaching the true minimum energy eigenvalue. Additionally, severe stochastic oscillations between 1.0 Å and 1.5 Å on the curve induce premature convergence of the SPSA optimiser to spurious local minima. These results demonstrate that unmitigated hardware noise renders VQE incapable of reliably predicting equilibrium bond lengths on current NISQ devices, motivating the future integration of Zero-Noise Extrapolation (ZNE), readout error mitigation, and Virtual Distillation into the computational pipeline. Keywords—Variational Quantum Eigensolver (VQE); Qiskit 1.x; Potential Energy Curve; Molecular Ground-State Energy; Hardware-Efficient Ansatz; Gate-Level Noise Simulation; ActiveSpaceTransformer; NISQ Devices.

•Jun 22, 2026•0 citations

The impacts of optimization algorithm and basis size on the accuracy and efficiency of variational quantum eigensolver

Xian‐Hu Zha, Zhang, Chao, Dengdong Fan +4 more

Variational quantum eigensolver (VQE) is demonstrated to be the promising methodology for quantum chemistry based on near-term quantum devices. However, many problems are yet to be investigated for this methodology, such as the influences of optimization algorithm and basis size on the accuracy and efficiency for quantum computing. To address these issues, five molecules (H2, LiH, HF, N2 and F2) are studied in this work based on the VQE method using unitary coupled cluster (UCC) ansatz. The performance of the gradient optimization L-BFGS-B is compared with that of the direct search method COBYLA. The former converges more quickly, but the accuracy of energy surface is a little lower. The basis set shows a vital influence on the accuracy and efficiency. A large basis set generally provides an accurate energy surface, but induces a significant increase in computing time. The 631g basis is generally required from the energy surface of the simplest H2 molecule. For practical applications of VQE, complete active space (CAS) is suggested based on limited quantum resources. With the same number of qubits, more occupied orbitals included in CAS gives a better accuracy for the energy surface and a smaller evaluation number in the VQE optimization. Additionally, the electronic structure, such as filling fraction of orbitals, the bond strength of a molecule and the maximum nuclear charge also influences the performance of optimization, where half occupation of orbitals generally requires a large computation cost.

arXiv:2006.15852•Jun 29, 2020•6 citations
Abstract The variational quantum Eigensolver (VQE) provides a scalable route to molecular ground-state energies on near-term quantum hardware, but its accuracy degrades rapidly as system size grows because hardware-efficient ansätze cannot span the full correlation subspace. We introduce a physics-informed ridge regression correction that is trained on the difference between VQE and Hartree–Fock (HF) energies and applied as a postprocessing step requiring no additional quantum resources. The feature set─the VQE–HF energy gap ΔE, its square ΔE2, the active-space qubit count, the number of active electrons, and two cross-term interactions─captures the dominant drivers of ansatz error in a low-dimensional, interpretable form. The model is benchmarked on H2, H2O, NH3, CH4, C2H6, and CH3OH using the STO-3G basis set and a state vector VQE simulator using a two-layer Ry-CNOT hardware-efficient ansatz. To assess cross-molecule generalizability, the corrected framework is further tested on CO2, N2, and HCN under both untrained and trained conditions. Absolute energy errors fall from a range of 0.02–0.79 Ha (raw VQE) to 0.0007–0.094 Ha after correction, corresponding to improvement factors of 3× to 640× relative to CASCI reference values. Zero-shot generalization tests yield factors of 9–58×, and including molecules in training improves results by a further order of magnitude in several cases. The three extended molecules exhibit improvement factors of 4–6× in untrained settings and 5–6× after training, providing preliminary evidence of transferability across chemically distinct systems. These findings suggest that the VQE–HF energy gap encodes physically transferable information about correlation-energy saturation, and that even the smallest training set can produce practically useful corrections for near-term quantum chemistry.
Abstract The variational quantum eigensolver (VQE) is the leading near-term quantum algorithm for molecular ground states, but its accuracy is often reported with inconsistent reference values and metrics. We present a reproducible benchmark of a hardware-efficient VQE ansatz (R Y –R Z rotations with linear CNOT entanglement) for H 2 , HeH + , LiH, BeH 2 , H 2 O, NH 3 , CH 4 , CO 2 and N 2 in the STO-3G basis. Hamiltonians were generated with PySCF and Qiskit Nature, encoded with the parity mapping and two-qubit reduction on 2, 4 or 6 qubits, and minimised with SLSQP and analytic gradients in noiseless statevector simulations, with a penalty term enforcing the correct electron number. Energies are compared with exact active-space (CASCI) and all-electron full configuration interaction (FCI) references in the same basis, at experimental geometries and along potential energy curves (144 geometries in total). For the two- and four-qubit systems, VQE reproduces the exact energies, potential energy curves, bond lengths and harmonic frequencies to numerical precision. For the six-qubit systems the equilibrium errors are 0.3–7.5 mE h and reach 51.1 mE h along the curves, so chemical accuracy (1.6 mE h ) is reached only for H 2 O and CH 4 ; increasing the depth to reps = 4–6 (20–30 CNOTs) restores chemical accuracy at equilibrium, and UCCSD reaches chemical accuracy for all nine molecules but requires 476 instead of 15 CNOT gates. Active-space truncation errors (1–139 mE h ) exceed the VQE errors, and deviations of STO-3G bond lengths from experiment (up to 0.14 Å) are basis-set effects shared by FCI. The results show why VQE errors should be reported in absolute terms against exact references for the same Hamiltonian, and they provide a baseline for evaluating noise-aware and symmetry-preserving ansätze.
Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:H2,H3+,LiH,HF,OH−,H2O,BH3,CH4\mathrm{H}_{2}, \mathrm{H}_{3}^{+}, \text{LiH}, \text{HF}, \text{OH}^{-}, \mathrm{H}_{2} \mathrm{O}, \text{BH}_{3}, \text{CH}_{4}H2​,H3+​,LiH,HF,OH−,H2​O,BH3​,CH4​, andNH3\text{NH}_{3}NH3​. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.
In recent years, the Variational Quantum Eigensolver (VQE) has emerged as one of the most popular algorithms for solving the electronic structure problem on near-term quantum computers. The utility of VQE is often hindered by the limitations of current quantum hardware, including, but not limited to, short qubit coherence times and low gate fidelities. These limitations become particularly pronounced when VQE is used along with deep quantum circuits, such as those required by the ”Unitary Coupled Cluster Singles and Doubles” (UCCSD) ansatz, often resulting in significant errors. To address these issues, we propose a low-depth ansatz based on parallelized Givens rotations, which can recover substantial correlation energy while drastically reducing circuit depth and two-qubit gate counts for an arbitrary active space (AS). Also, considering the current hardware architectures with low qubit counts, we introduce a systematic way to select molecular orbitals to define active spaces (ASs) that retain significant electron correlation. We validate our approach by computing bond dissociation profiles of water and strongly correlated systems, such as molecular nitrogen and oxygen, across various ASs. Noiseless simulations using the new ansatz yield ground-state energies comparable to those from the UCCSD ansatz while reducing circuit depth by 50–70%. Moreover, in noisy simulations, our approach achieves energy error rates an order of magnitude lower than that of UCCSD. Considering the efficiency and practical usage of our ansatz, we hope that it becomes a potential choice for performing quantum chemistry calculations on near-term quantum devices.
Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like H2H_2H2​, LiHLiHLiH, N2N_2N2​. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for H2H_2H2​ and LiHLiHLiH, and fails for N2N_2N2​, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.
This study investigates the Variational Quantum Eigensolver (VQE), a hybrid quantum-classical algorithm that partitions the computational workload between a quantum processing unit and a classical optimiser to determine the ground-state energies of molecular systems. The Qiskit SDK v1.x framework is employed, utilising the PySCFDriver module within the qiskit-nature package to construct second-quantised molecular electronic Hamiltonians for two representative systems: Hydrogen ( ) and Lithium Hydride ( ). For the complete active space is retained without spatial reduction, mapping the full Hamiltonian onto a 4-qubit register. However for the full STO-3G representation demands 12 qubits, rendering direct classical parameter optimisation computationally intractable. This bottleneck is resolved by applying an ActiveSpaceTransformer (num_electrons=2, num_spatial_orbitals=3) to freeze the chemically inactive lithium core electrons, reducing the active register to 6 qubits. Fermionic operators are subsequently converted to Pauli strings via the Jordan-Wigner transformation ( ) enabling the quantum processor to evaluate the molecular Hamiltonian as a circuit while preserving the fermionic anti-commutation relations. Under ideal, noise-free simulation using the StatevectorEstimator primitive paired with the COBYLA optimiser (maxiter=200), all VQE energy points converge precisely onto the Full Configuration Interaction (FCI) classical baseline across the full range of interatomic separations. This confirms that the hardware-efficient TwoLocal ansatz ( rotation layers and entanglement layers with reps=3) possesses sufficient expressive power to capture the molecular ground-state wavefunction. Introducing gate-level noise through AerSimulator backends calibrated from the FakeManilaV2 and FakeNairobiV2 hardware profiles—with optimisation driven by the SPSA algorithm (maxiter=150)—reveals two critical failure modes. A systematic upward energy bias is observed, attributable to depolarising gate errors and measurement readout faults that prevent the optimiser from reaching the true minimum energy eigenvalue. Additionally, severe stochastic oscillations between 1.0 Å and 1.5 Å on the curve induce premature convergence of the SPSA optimiser to spurious local minima. These results demonstrate that unmitigated hardware noise renders VQE incapable of reliably predicting equilibrium bond lengths on current NISQ devices, motivating the future integration of Zero-Noise Extrapolation (ZNE), readout error mitigation, and Virtual Distillation into the computational pipeline. Keywords—Variational Quantum Eigensolver (VQE); Qiskit 1.x; Potential Energy Curve; Molecular Ground-State Energy; Hardware-Efficient Ansatz; Gate-Level Noise Simulation; ActiveSpaceTransformer; NISQ Devices.
Variational quantum eigensolver (VQE) is demonstrated to be the promising methodology for quantum chemistry based on near-term quantum devices. However, many problems are yet to be investigated for this methodology, such as the influences of optimization algorithm and basis size on the accuracy and efficiency for quantum computing. To address these issues, five molecules (H2, LiH, HF, N2 and F2) are studied in this work based on the VQE method using unitary coupled cluster (UCC) ansatz. The performance of the gradient optimization L-BFGS-B is compared with that of the direct search method COBYLA. The former converges more quickly, but the accuracy of energy surface is a little lower. The basis set shows a vital influence on the accuracy and efficiency. A large basis set generally provides an accurate energy surface, but induces a significant increase in computing time. The 631g basis is generally required from the energy surface of the simplest H2 molecule. For practical applications of VQE, complete active space (CAS) is suggested based on limited quantum resources. With the same number of qubits, more occupied orbitals included in CAS gives a better accuracy for the energy surface and a smaller evaluation number in the VQE optimization. Additionally, the electronic structure, such as filling fraction of orbitals, the bond strength of a molecule and the maximum nuclear charge also influences the performance of optimization, where half occupation of orbitals generally requires a large computation cost.