Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:$\mathrm{H}_{2}, \mathrm{H}_{3}^{+}, \text{LiH}, \text{HF}, \text{OH}^{-}, \mathrm{H}_{2} \mathrm{O}, \text{BH}_{3}, \text{CH}_{4}$, and$\text{NH}_{3}$. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.
Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:H2,H3+,LiH,HF,OH−,H2O,BH3,CH4, andNH3. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.
Accurate prediction of binding energies between drug candidates and target molecules is essential in computational drug discovery, as stronger (more negative) binding energies suggest higher efficacy. This energy corresponds to the ground state of the molecular system and can be computed using methods such as Full Configuration Interaction (FCI), Hartree-Fock (HF), Variational Quantum Eigensolver (VQE), and Quantum Phase Estimation (QPE). While FCI offers benchmark accuracy, its computational cost renders it impractical for larger systems. HF scales efficiently but at the expense of precision. QPE, though theoretically robust, is currently constrained by hardware limitations. VQE emerges as a practical alternative for Noisy Intermediate-Scale Quantum (NISQ) devices, balancing accuracy and feasibility. Nevertheless, quantum noise significantly affects VQE performance. To address this, we incorporate Zero Noise Extrapolation (ZNE) to mitigate errors and improve energy estimates. This study compares these approaches and demonstrates the efficacy of the VQEZNE framework in generating reliable binding energy calculations for drug design applications.
Accurate determination of ground-state energies for molecules remains a challenge in quantum chemistry and a cornerstone for progress in fields such as drug discovery and materials design. The Variational Quantum Eigensolver (VQE) represents a leading hybrid quantum-classical paradigm for addressing this challenge; however, its widespread realization is limited by noise and the restricted scalability of current quantum hardware. Achieving efficient simulations on Noisy Intermediate-Scale Quantum (NISQ) devices and forthcoming Fault-Tolerant Application-Scalable Quantum (FASQ) systems demands a detailed understanding of how computational resources scale with molecular complexity and fermion-to-qubit encodings. In this study, resource requirements for VQE implementations employing the Unitary Coupled Cluster Singles and Doubles (UCCSD) ansatz are systematically analyzed. The molecular Hamiltonian is formulated in second quantization and mapped to qubit operators through the Jordan-Wigner (JW), Bravyi-Kitaev (BK), and Parity (Pa) transformations. Hamiltonian reduction strategies, including Z2 tapering and frozen-core approximations, are examined to assess their effect on quantum resource scaling. The analysis reveals that appropriate transformations, when combined with symmetry-based reductions, can substantially reduce qubit counts by up to ≈50% and quantum gate counts by up to ≈27.5× and Hamiltonian Pauli string counts by up to ≈2.75×, relative to the corresponding unreduced Hamiltonian representations within the same active-space configuration for the representative set of molecular systems under study. These findings provide practical circuit-level insights for executing chemically relevant simulations on NISQ hardware, while establishing physical-resource baselines that may inform future logical-level analyses targeting FASQ systems.
Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like H2, LiH, N2. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for H2 and LiH, and fails for N2, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.
The Variational Quantum Eigensolver (VQE) is a hybrid algorithm that combines quantum and classical computing to determine the ground-state energy of molecular systems. In this context, this study applies VQE to investigate the ground state of protocatechuic acid, analyzing its performance with various Ansatzes and active spaces. Subsequently, all VQE results were compared to those obtained with the CISD and FCI methods. The results demonstrate that Ansatzes, like Unitary Coupled Cluster Singles and Doubles (UCCSD) and variations of Hardware-Efficient Ansatzes, generally achieve accuracy close to that of FCI. In conclusion, this study highlights the effectiveness of VQE as a robust method for investigating molecular ground-state energies. Additionally, the findings emphasize the pivotal role of Ansatz design and active space selection in optimizing VQE performance, offering meaningful insights into its capabilities and constraints.
Abstract The variational quantum eigensolver (VQE) is the leading near-term quantum algorithm for molecular ground states, but its accuracy is often reported with inconsistent reference values and metrics. We present a reproducible benchmark of a hardware-efficient VQE ansatz (R Y –R Z rotations with linear CNOT entanglement) for H 2 , HeH + , LiH, BeH 2 , H 2 O, NH 3 , CH 4 , CO 2 and N 2 in the STO-3G basis. Hamiltonians were generated with PySCF and Qiskit Nature, encoded with the parity mapping and two-qubit reduction on 2, 4 or 6 qubits, and minimised with SLSQP and analytic gradients in noiseless statevector simulations, with a penalty term enforcing the correct electron number. Energies are compared with exact active-space (CASCI) and all-electron full configuration interaction (FCI) references in the same basis, at experimental geometries and along potential energy curves (144 geometries in total). For the two- and four-qubit systems, VQE reproduces the exact energies, potential energy curves, bond lengths and harmonic frequencies to numerical precision. For the six-qubit systems the equilibrium errors are 0.3–7.5 mE h and reach 51.1 mE h along the curves, so chemical accuracy (1.6 mE h ) is reached only for H 2 O and CH 4 ; increasing the depth to reps = 4–6 (20–30 CNOTs) restores chemical accuracy at equilibrium, and UCCSD reaches chemical accuracy for all nine molecules but requires 476 instead of 15 CNOT gates. Active-space truncation errors (1–139 mE h ) exceed the VQE errors, and deviations of STO-3G bond lengths from experiment (up to 0.14 Å) are basis-set effects shared by FCI. The results show why VQE errors should be reported in absolute terms against exact references for the same Hamiltonian, and they provide a baseline for evaluating noise-aware and symmetry-preserving ansätze.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.