Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

rf quantum capacitance parametric amplifier

Abdallah El Kass, B. Harlech-Jones, Craig T Jin, J. D. Watson, G. C. Gardner, S. Fallahi, M. J. Manfra, Thomas Ohki, D. J. Reilly

Published Aug 28, 2026• 0 citations
Publisher

Abstract

We report an rf parametric amplifier that exploits the gate-tunable quantum capacitance of a semiconductor two-dimensional electron gas at cryogenic temperatures. The prototype amplifier exhibits a gain approximately 30 dB up to an input power of − 66 dBm and a noise temperature T N ∼ 2 K at approximately 370 MHz while dissipating approximately a microwatt of power. Operable at tesla-scale magnetic fields and temperatures ranging from millikelvin to a few kelvin, the quantum capacitance parametric amplifier may find utility in the readout circuit of spin qubits. Here, a quantum dot system is used to verify amplifier performance, improving the signal-to-noise ratio of the readout by approximately 9 dB.

DOI
10.1103/3146-fgdw

Related papers

An rf Quantum Capacitance Parametric Amplifier

Abdallah El Kass, C. T. Jin, J. D. Watson +4 more

We demonstrate a radio-frequency parametric amplifier that exploits the gate-tunable quantum capacitance of an ultra high mobility two dimensional electron gas (2DEG) in a GaAs heterostructure at cryogenic temperatures. The prototype narrowband amplifier exhibits a gain greater than 20 dB up to an input power of - 66 dBm (1 dB compression), and a noise temperature TN of 1.3 K at 370 MHz. In contrast to superconducting amplifiers, the quantum capacitance parametric amplifier (QCPA) is operable at tesla-scale magnetic fields and temperatures ranging from milli kelvin to a few kelvin. These attributes, together with its low power (microwatt) operation when compared to conventional transistor amplifiers, suggest the QCPA may find utility in enabling on-chip integrated readout circuits for semiconductor qubits or in the context of space transceivers and radio astronomy instruments.

arXiv:2304.13227•Apr 26, 2023•2 citations

Quantum Dot-Based Parametric Amplifiers

Laurence Cochrane, Theodor Lundberg, David J. Ibberson +8 more

Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.

arXiv:2111.11825•Nov 23, 2021•1 citation

On-chip Parametric Amplification in a Double Quantum Dots Circuit

Yong-Qiang Xu, Rui Wu, Si-Si Gu +8 more

In microwave-based quantum circuits, including double quantum dots (DQDs), superconducting qubits and spin qubits, parametric amplifiers are indispensable in achieving high-fidelity qubit readouts. Despite its importance, the application of parametric amplifiers is hampered by several challenges, such as high insertion losses, constrained tunability, and a pronounced vulnerability to magnetic fields. Here, we demonstrate an on-site single-atom parametric amplifier (SAPA) within a reconfigurable quantum circuit, which consists of a superconducting microwave cavity and two GaAs gate-defined DQDs. Leveraging the inherent nonlinearity of the DQD, a parametric gain exceeding 11 dB is achieved. This gain contributes to enhance the qubit readout, as evidenced by exceeding two times improvement in the signal-to-noise ratio (SNR) when employing the DQD-based amplifier for reading out another DQD. Our work not only presents a versatile experimental platform with enhanced readout capabilities in quantum computing, but also introduces alternative choices of parametric amplifiers for a variety of microwave-based quantum circuits.

quant-pharXiv:2603.18666•Science China Physics Mechanics and Astronomy•Mar 20, 2026•1 citation

Parametric Amplifiers Based on Quantum Dots

Laurence Cochrane, Theodor Lundberg, David J. Ibberson +8 more

Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipationless nonlinear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8 GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semiclassical model, we find an optimized design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.

Physical Review Letters•May 10, 2022•17 citations

A Fully Integrated CMOS Parametric Amplifier for Cryogenic Qubit Readout

Gabriel López-Pinar, C. Aldea, Santiago Celma +1 more

Scalable quantum computing demands compact, low-power, and ultra-low-noise readout electronics at cryogenic temperatures. This work presents a fully integrated CMOS hybrid-less parametric amplifier for near-qubit preamplification at 5 GHz. Operating in a regime where the pump frequency is close to twice the signal frequency, the amplifier provides 10 dB of gain with reduced sensitivity to the input phase, thereby easing system tuning and minimizing the need for precise synchronization. It also presents effective idler suppression (18.4 dB) and pump isolation (52.8 dB), while eliminating bulky off-chip hybrids or circulators. The design occupies only $0.3 \mathrm{~mm}^{2}$ and consumes 10 mW, enabling full on-chip integration and improved scalability. Although the bandwidth (4.8-5 GHz) is narrower than some prior works, it remains sufficient for narrowband qubit readout, highlighting a practical trade-off between performance, compactness, and system complexity for scalable cryogenic quantum interfaces.

International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design•Jun 1, 2026•1 citation

Broadband parametric amplification for multiplexed SiMOS quantum dot signals

Victor El-Homsy, Luca Planat, David J. Niegemann +14 more

Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in Si MOS transistorlike devices eases future industrial-scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radio-frequency reflectometry only requires the already existing transistor gates to read a quantum dot state, which alleviates the need for additional elements. In this effort toward scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below that of typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3-GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in Si MOS multigate devices, with SNR enhanced due to a Josephson traveling-wave parametric amplifier (JTWPA). The broad tunable 2-GHz amplification bandwidth combined with more than 10-dB ON-OFF SNR improvement of the JTWPA enables frequency and time-division-multiplexed readout of interdot transitions, and noise performance consistent with JTWPA characteristics at higher frequencies. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performance up to a magnetic field of 1.1 T at the quantum dot device, compatible with standard Si MOS spin-qubit experiments.

arXiv:2307.14717•Physical Review Applied•Aug 28, 2025•12 citations
We report an rf parametric amplifier that exploits the gate-tunable quantum capacitance of a semiconductor two-dimensional electron gas at cryogenic temperatures. The prototype amplifier exhibits a gain approximately 30 dB up to an input power of − 66 dBm and a noise temperature T N ∼ 2 K at approximately 370 MHz while dissipating approximately a microwatt of power. Operable at tesla-scale magnetic fields and temperatures ranging from millikelvin to a few kelvin, the quantum capacitance parametric amplifier may find utility in the readout circuit of spin qubits. Here, a quantum dot system is used to verify amplifier performance, improving the signal-to-noise ratio of the readout by approximately 9 dB.
We demonstrate a radio-frequency parametric amplifier that exploits the gate-tunable quantum capacitance of an ultra high mobility two dimensional electron gas (2DEG) in a GaAs heterostructure at cryogenic temperatures. The prototype narrowband amplifier exhibits a gain greater than 20 dB up to an input power of - 66 dBm (1 dB compression), and a noise temperature TN of 1.3 K at 370 MHz. In contrast to superconducting amplifiers, the quantum capacitance parametric amplifier (QCPA) is operable at tesla-scale magnetic fields and temperatures ranging from milli kelvin to a few kelvin. These attributes, together with its low power (microwatt) operation when compared to conventional transistor amplifiers, suggest the QCPA may find utility in enabling on-chip integrated readout circuits for semiconductor qubits or in the context of space transceivers and radio astronomy instruments.
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
In microwave-based quantum circuits, including double quantum dots (DQDs), superconducting qubits and spin qubits, parametric amplifiers are indispensable in achieving high-fidelity qubit readouts. Despite its importance, the application of parametric amplifiers is hampered by several challenges, such as high insertion losses, constrained tunability, and a pronounced vulnerability to magnetic fields. Here, we demonstrate an on-site single-atom parametric amplifier (SAPA) within a reconfigurable quantum circuit, which consists of a superconducting microwave cavity and two GaAs gate-defined DQDs. Leveraging the inherent nonlinearity of the DQD, a parametric gain exceeding 11 dB is achieved. This gain contributes to enhance the qubit readout, as evidenced by exceeding two times improvement in the signal-to-noise ratio (SNR) when employing the DQD-based amplifier for reading out another DQD. Our work not only presents a versatile experimental platform with enhanced readout capabilities in quantum computing, but also introduces alternative choices of parametric amplifiers for a variety of microwave-based quantum circuits.
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipationless nonlinear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8 GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semiclassical model, we find an optimized design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
Scalable quantum computing demands compact, low-power, and ultra-low-noise readout electronics at cryogenic temperatures. This work presents a fully integrated CMOS hybrid-less parametric amplifier for near-qubit preamplification at 5 GHz. Operating in a regime where the pump frequency is close to twice the signal frequency, the amplifier provides 10 dB of gain with reduced sensitivity to the input phase, thereby easing system tuning and minimizing the need for precise synchronization. It also presents effective idler suppression (18.4 dB) and pump isolation (52.8 dB), while eliminating bulky off-chip hybrids or circulators. The design occupies only 0.3 mm20.3 \mathrm{~mm}^{2}0.3 mm2 and consumes 10 mW, enabling full on-chip integration and improved scalability. Although the bandwidth (4.8-5 GHz) is narrower than some prior works, it remains sufficient for narrowband qubit readout, highlighting a practical trade-off between performance, compactness, and system complexity for scalable cryogenic quantum interfaces.
Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in Si MOS transistorlike devices eases future industrial-scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radio-frequency reflectometry only requires the already existing transistor gates to read a quantum dot state, which alleviates the need for additional elements. In this effort toward scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below that of typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3-GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in Si MOS multigate devices, with SNR enhanced due to a Josephson traveling-wave parametric amplifier (JTWPA). The broad tunable 2-GHz amplification bandwidth combined with more than 10-dB ON-OFF SNR improvement of the JTWPA enables frequency and time-division-multiplexed readout of interdot transitions, and noise performance consistent with JTWPA characteristics at higher frequencies. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performance up to a magnetic field of 1.1 T at the quantum dot device, compatible with standard Si MOS spin-qubit experiments.