Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Instrumentation and Measurement

Ambiguity-Free RF Frequency Measurement Using Tri-Comb Hierarchical Search on Rydberg-Atom Receivers

Tingting Wang, Di Sang, Yunqi Fu

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Microwave frequency combs (MFCs) significantly enhance the instantaneous bandwidth of Rydberg-atom quantum sensors but introduce a persistent digital signal processing (DSP) bottleneck: frequency ambiguity. While single-comb systems lack absolute reference, dual-comb architectures exhibit residual mode ambiguity at specific frequency points, particularly under demanding wideband conditions (50 MHz–5 GHz). To address this, this article proposes a tri-comb constrained hierarchical search (TC-CHS) algorithm, which leverages hierarchical constraint logic to decouple computational complexity from the expansion of the search space. Numerical simulations demonstrate that the TC-CHS maintains nearly invariant algorithmic processing latency (~0.015 ms per point). Consequently, the computational advantage expands with the search space, reaching a peak speedup of$737.87\times $at the maximum tested comb-tooth count (40). Experimental validation on a Rydberg-atom sensing platform confirms the method’s efficacy, yielding a mean absolute frequency error of 0.791 Hz. The algorithm employs tri-comb redundancy as a tolerance-based error-correction mechanism, enabling robust operation under low signal-to-noise-ratio (low-SNR) conditions and immunity to frequency drifts up to 5 kHz/s. This approach achieves a five-order-of-magnitude improvement in reliability compared to traditional dual-comb schemes, eliminating the need for per-band recalibration. This work provides a computationally efficient and metrologically robust solution for high-precision frequency measurement in wideband spectrum monitoring and quantum receiver systems.

DOI
10.1109/tim.2026.3723530

Related papers

Instantaneous Frequency Estimation of Radio Frequency Signal Based on Rydberg Atomic Receiver

Guanyu Chen, Cheng Wang, Bin Yang +1 more

Rydberg atom receiver attracts much research interest for promising applications in communications and sensing. Generally, Rydberg atomic receiver is utilized with microwave frequency comb (MFC) to expand its detectable frequency range. MFC consists of a set of equally spaced discrete frequency lines, resembling a comb in frequency space. In such receives, the mixing of RF signal and its closest MFC component excites the atoms into the desired Rydberg state. Since the mixing rather than RF signal is detected, there exists inevitable ambiguity of frequency estimation. In this paper, we provide a novel frequency ambiguity resolution based on improved Chinese remainder theorem (I-CRT). It realizes the instantaneous frequency estimation of RF signal with the MFC-based Rydberg atomic receiver. The effectiveness of proposed resolution in this paper is verified by both simulation experiments and theoretical analysis.

IEEE photonics journal•Mar 25, 2024•10 citations

Broadband Far-detuned Sensing in VHF Band Based on a Rydberg Microwave Frequency Comb Receiver

Tingting Wang, Di Sang, Yunqi Fu

To address the requirements for broadband sensing in the VHF band (30–300 MHz), this paper proposes and experimentally verifies a multi-frequency collaborative Rydberg-atom heterodyne receiver. By integrating the far-detuned AC Stark effect with a microwave frequency comb (MFC) mechanism, the system utilizes a seven-tooth MFC with a 50 MHz center frequency and 10 MHz comb spacing as a multi-point local oscillator to achieve broadband signal capture from 55 to 85 MHz. Experimental results demonstrate that at the 85 MHz target frequency (representing a 35 MHz frequency offset for the single-LO system), the signal-to-noise ratio (SNR) is improved from 0.3 dB to 4.3 dB. This study verifies the possibility of achieving wideband measurement in the VHF band by combining far-detuning with an MFC mechanism, serving as a critical experimental and technical reference for the engineering implementation of high-performance broadband quantum receivers.

International Conference on Microwave and Millimeter Wave Technology (ICMMT)•May 1, 2026•0 citations

Tunable off-resonant Rydberg microwave frequency comb spectroscopy based on metawaveguide coupled Rydberg atoms

Lihua Zhang, Zong-Kai Liu, Bang Liu +10 more

Studying Rydberg microwave frequency comb (MFC) spectroscopy helps increase the working bandwidth of the Rydberg receiver.This Letter demonstrates off-resonant Rydberg MFC spectroscopy in a meta-waveguide-coupled Rydberg atomic system.An off-resonant MFC field couples with the Rydberg atoms through a meta-waveguide.The system can receive the microwave field in the working band from 0.5 GHz to 13.5 GHz, and the MFC spectroscopy covers a span of 36 MHz at three different arbitrarily-chosen frequencies of 2 GHz, 3 GHz, and 5.8 GHz.The MFC spectrum that covers a wide range of 125 MHz is also verified.This work is significant for tunable wide-band instant microwave signal detection in the Rydberg atomic system, which is useful in microwave frequency metrology, communication, and radar.

Chinese Optics Letters•Jan 1, 2024•9 citations

Ultra-wide dual-band Rydberg atomic receiver based on space division multiplexing radio-frequency chip modules

Li-Hua Zhang, Bang Liu, Zong-Kai Liu +8 more

Detecting microwave signals over a wide frequency range has numerous advantages as it enables simultaneous transmission of a large amount of information, and access to more spectrum resources. This capability is crucial for applications such as microwave communication, remote sensing, and radar. However, conventional microwave receiving systems are limited by amplifiers and band-pass filters that can only operate efficiently in a specific frequency range. Typically, these systems can only process signals within a three-fold frequency range, which limits the data transfer bandwidth of the microwave communication systems. Developing novel atom-integrated microwave sensors, for example, radio frequency (RF)-chip coupled Rydberg atomic receiver, provides opportunities for a large working bandwidth of microwave sensing at the atomic level. Here, an ultra-wide dual-band RF sensing scheme is demonstrated by space-division multiplexing two RF-chip-integrated atomic receiver modules. The system can simultaneously receive dual-band microwave signals that span a frequency range exceeding 6 octaves (300 MHz and 24 GHz). This work paves the way for multi-band microwave reception applications within an ultra-wide range by RF-chip-integrated Rydberg atomic sensor.

arXiv:2404.09757•Chip•Apr 2, 2024•26 citations

Resonant Rydberg Microwave Frequency Comb Spectroscopy Based on Transverse Electromagnetic Cell Coupled Rydberg Atoms

Xiangyu Li, Hongjin Chen, Di Sang +2 more

Microwave frequency comb represents one of the effective solutions to address the bandwidth limitation in Rydberg atom-based microwave measurements. Here, we demonstrate that by optimizing the phase and intensity of the microwave frequency comb, the average spectral response can be enhanced to achieve optimal flatness in the microwave frequency comb spectrum. This optimization enables the realization of instantaneous bandwidth for a Rydberg receiver at a resonant frequency of 8.556 GHz. This work holds significant implications for the detection of broadband instantaneous microwave signals in Rydberg atom systems, with substantial application potential in fields such as microwave frequency metrology, communications, and radar.

International Conference on Microwave and Millimeter Wave Technology (ICMMT)•May 19, 2025•0 citations

Broadband frequency hopping by Rydberg atoms with high orbital angular momentum states

Yanjie Tong, Zongkai Liu, Qiming Ren +8 more

Communication technologies advance toward secure communication, with frequency hopping communication (FH-C) widely used. However, traditional FH-C is limited by slow hopping speed, narrow bandwidth, and a few hopping points. Rydberg atoms offer a solution but face challenges like poor non-resonant microwave sensitivity and local oscillator synchronization limits. Here, we propose a frequency-hopping receiver based on atomic heterodyne detection that employs high orbital angular momentum (high-OAM) Rydberg states for resonant detection of rapidly hopping radio-frequency signals across multiple, widely separated frequency bands. The high-OAM Rydberg atoms ( l =3,4,5) resonantly detect 315 MHz, 1.7 GHz, and 29.74 GHz RF hopping signals (spanning 6 octaves). With heterodyne detection and a continuous excitation scheme, the system eliminates spectral establishment time, achieving 60 khops/s without transmitter-receiver synchronization, and uses frequency combs to extend hopping points to 5 MHz around resonant frequencies. These advances demonstrate the potential of Rydberg-atom–based receivers for high-speed and wide-band frequency-hopping communication.

Optics Express•Jan 27, 2026•0 citations
Microwave frequency combs (MFCs) significantly enhance the instantaneous bandwidth of Rydberg-atom quantum sensors but introduce a persistent digital signal processing (DSP) bottleneck: frequency ambiguity. While single-comb systems lack absolute reference, dual-comb architectures exhibit residual mode ambiguity at specific frequency points, particularly under demanding wideband conditions (50 MHz–5 GHz). To address this, this article proposes a tri-comb constrained hierarchical search (TC-CHS) algorithm, which leverages hierarchical constraint logic to decouple computational complexity from the expansion of the search space. Numerical simulations demonstrate that the TC-CHS maintains nearly invariant algorithmic processing latency (~0.015 ms per point). Consequently, the computational advantage expands with the search space, reaching a peak speedup of737.87×737.87\times 737.87×at the maximum tested comb-tooth count (40). Experimental validation on a Rydberg-atom sensing platform confirms the method’s efficacy, yielding a mean absolute frequency error of 0.791 Hz. The algorithm employs tri-comb redundancy as a tolerance-based error-correction mechanism, enabling robust operation under low signal-to-noise-ratio (low-SNR) conditions and immunity to frequency drifts up to 5 kHz/s. This approach achieves a five-order-of-magnitude improvement in reliability compared to traditional dual-comb schemes, eliminating the need for per-band recalibration. This work provides a computationally efficient and metrologically robust solution for high-precision frequency measurement in wideband spectrum monitoring and quantum receiver systems.
Rydberg atom receiver attracts much research interest for promising applications in communications and sensing. Generally, Rydberg atomic receiver is utilized with microwave frequency comb (MFC) to expand its detectable frequency range. MFC consists of a set of equally spaced discrete frequency lines, resembling a comb in frequency space. In such receives, the mixing of RF signal and its closest MFC component excites the atoms into the desired Rydberg state. Since the mixing rather than RF signal is detected, there exists inevitable ambiguity of frequency estimation. In this paper, we provide a novel frequency ambiguity resolution based on improved Chinese remainder theorem (I-CRT). It realizes the instantaneous frequency estimation of RF signal with the MFC-based Rydberg atomic receiver. The effectiveness of proposed resolution in this paper is verified by both simulation experiments and theoretical analysis.
To address the requirements for broadband sensing in the VHF band (30–300 MHz), this paper proposes and experimentally verifies a multi-frequency collaborative Rydberg-atom heterodyne receiver. By integrating the far-detuned AC Stark effect with a microwave frequency comb (MFC) mechanism, the system utilizes a seven-tooth MFC with a 50 MHz center frequency and 10 MHz comb spacing as a multi-point local oscillator to achieve broadband signal capture from 55 to 85 MHz. Experimental results demonstrate that at the 85 MHz target frequency (representing a 35 MHz frequency offset for the single-LO system), the signal-to-noise ratio (SNR) is improved from 0.3 dB to 4.3 dB. This study verifies the possibility of achieving wideband measurement in the VHF band by combining far-detuning with an MFC mechanism, serving as a critical experimental and technical reference for the engineering implementation of high-performance broadband quantum receivers.
Studying Rydberg microwave frequency comb (MFC) spectroscopy helps increase the working bandwidth of the Rydberg receiver.This Letter demonstrates off-resonant Rydberg MFC spectroscopy in a meta-waveguide-coupled Rydberg atomic system.An off-resonant MFC field couples with the Rydberg atoms through a meta-waveguide.The system can receive the microwave field in the working band from 0.5 GHz to 13.5 GHz, and the MFC spectroscopy covers a span of 36 MHz at three different arbitrarily-chosen frequencies of 2 GHz, 3 GHz, and 5.8 GHz.The MFC spectrum that covers a wide range of 125 MHz is also verified.This work is significant for tunable wide-band instant microwave signal detection in the Rydberg atomic system, which is useful in microwave frequency metrology, communication, and radar.
Detecting microwave signals over a wide frequency range has numerous advantages as it enables simultaneous transmission of a large amount of information, and access to more spectrum resources. This capability is crucial for applications such as microwave communication, remote sensing, and radar. However, conventional microwave receiving systems are limited by amplifiers and band-pass filters that can only operate efficiently in a specific frequency range. Typically, these systems can only process signals within a three-fold frequency range, which limits the data transfer bandwidth of the microwave communication systems. Developing novel atom-integrated microwave sensors, for example, radio frequency (RF)-chip coupled Rydberg atomic receiver, provides opportunities for a large working bandwidth of microwave sensing at the atomic level. Here, an ultra-wide dual-band RF sensing scheme is demonstrated by space-division multiplexing two RF-chip-integrated atomic receiver modules. The system can simultaneously receive dual-band microwave signals that span a frequency range exceeding 6 octaves (300 MHz and 24 GHz). This work paves the way for multi-band microwave reception applications within an ultra-wide range by RF-chip-integrated Rydberg atomic sensor.
Microwave frequency comb represents one of the effective solutions to address the bandwidth limitation in Rydberg atom-based microwave measurements. Here, we demonstrate that by optimizing the phase and intensity of the microwave frequency comb, the average spectral response can be enhanced to achieve optimal flatness in the microwave frequency comb spectrum. This optimization enables the realization of instantaneous bandwidth for a Rydberg receiver at a resonant frequency of 8.556 GHz. This work holds significant implications for the detection of broadband instantaneous microwave signals in Rydberg atom systems, with substantial application potential in fields such as microwave frequency metrology, communications, and radar.
Communication technologies advance toward secure communication, with frequency hopping communication (FH-C) widely used. However, traditional FH-C is limited by slow hopping speed, narrow bandwidth, and a few hopping points. Rydberg atoms offer a solution but face challenges like poor non-resonant microwave sensitivity and local oscillator synchronization limits. Here, we propose a frequency-hopping receiver based on atomic heterodyne detection that employs high orbital angular momentum (high-OAM) Rydberg states for resonant detection of rapidly hopping radio-frequency signals across multiple, widely separated frequency bands. The high-OAM Rydberg atoms ( l =3,4,5) resonantly detect 315 MHz, 1.7 GHz, and 29.74 GHz RF hopping signals (spanning 6 octaves). With heterodyne detection and a continuous excitation scheme, the system eliminates spectral establishment time, achieving 60 khops/s without transmitter-receiver synchronization, and uses frequency combs to extend hopping points to 5 MHz around resonant frequencies. These advances demonstrate the potential of Rydberg-atom–based receivers for high-speed and wide-band frequency-hopping communication.