Trapped-ion quantum processors offer some of the lowest gate error rates among qubit platforms, encoding quantum information in ionic energy levels and entangling qubits via shared motional modes. Despite this maturity, scaling to large numbers of qubits while maintaining high-fidelity control remains a central challenge. This thesis addresses two key bottlenecks in laser-based trapped-ion systems: trap geometry and laser delivery. The first contribution is a quantitative framework for evaluating trap geometries with respect to scalability, applied to three electrode designs: a conventional surface trap, a ``gnd-surface'' multi-wafer trap, and a symmetric ``cross-rf'' multi-wafer trap. Multi-wafer designs, particularly the cross-rf trap, show substantial improvements in harmonicity, trap depth, radial trap frequency, and heating rate. However, the gnd-surface trap is identified as the most promising path to scaling due to its significantly simpler fabrication. The second contribution is the initial implementation of a photonic integrated circuit (PIC) for scalable laser delivery to ions. Operating at 729 nm, the PIC supports slow thermal tuning and fast nanosecond-scale modulation, with a pathtoward FPGA integration. Coupling of a frequency-stabilized laser into the PIC was demonstrated. Together, these contributions advance a modular architecture for trapped-ion quantum computation in which trap geometry and optical control are each independently engineered for large-scale operation.
Trapped-ion quantum processors offer some of the lowest gate error rates among qubit platforms, encoding quantum information in ionic energy levels and entangling qubits via shared motional modes. Despite this maturity, scaling to large numbers of qubits while maintaining high-fidelity control remains a central challenge. This thesis addresses two key bottlenecks in laser-based trapped-ion systems: trap geometry and laser delivery. The first contribution is a quantitative framework for evaluating trap geometries with respect to scalability, applied to three electrode designs: a conventional surface trap, a gnd-surface'' multi-wafer trap, and a symmetric cross-rf'' multi-wafer trap. Multi-wafer designs, particularly the cross-rf trap, show substantial improvements in harmonicity, trap depth, radial trap frequency, and heating rate. However, the gnd-surface trap is identified as the most promising path to scaling due to its significantly simpler fabrication. The second contribution is the initial implementation of a photonic integrated circuit (PIC) for scalable laser delivery to ions. Operating at 729 nm, the PIC supports slow thermal tuning and fast nanosecond-scale modulation, with a pathtoward FPGA integration. Coupling of a frequency-stabilized laser into the PIC was demonstrated. Together, these contributions advance a modular architecture for trapped-ion quantum computation in which trap geometry and optical control are each independently engineered for large-scale operation.
Among the various physical systems for quantum bit (qubit) implementation, trapped ion has drawn significant attention due to its long coherence time (in the second range) and high gate fidelity (>99.99% for single qubit gate). After years of careful development, the ion trap, from mechanically assembled linear trap to lithography-defined surface electrode ion trap, is compatible with CMOS fabrication, which opens the door for the high-resolution, high-repeatability and large-scale ion trap manufacturing. To date, the number of fully connected ion qubits in state-of-the-art ion trapping devices is ~10. However, to scale close to or even beyond the noisy intermediate-scale quantum regime (NISQ, ~100 ions), some challenges remain. One such challenge is to maintain the delicate control of multiple components over individual ion with increasing ion number. In such context, this thesis is committed to boost the scalability of ion trap by integrating advanced 3D interconnects (e.g., through silicon via) and other functional modules (e.g., silicon photonics and multilayer metallization). 3D interconnects are integrated in the half space underneath surface electrode, to replace conventional wire bonding that extends out of the surface. Silicon photonics (grating coupler and waveguide) in place of bulk optics and lenses are used for on-chip light routing and emission. Multilayer metallization is used to maintain the overall RF performance and enable high-density interconnection where necessary. Firstly, surface electrode ion traps on different substrates (namely high resistivity silicon, silicon with grounding plane and glass) are designed and fabricated. Standard CMOS back-end-of-line fabrication process on 12-inch wafer platform is employed. The electrical performances of different traps are compared in terms of leakage current (I-V), parasitic capacitance (C-V), on-chip RF loss (S-parameter) and post-packaging resonance. Though the leakage (at the order of 10-8 A) between neighboring electrodes is relatively high, ion trap on glass substrate demonstrates extremely small capacitance (<1 pF) and low RF loss (insertion loss of <0.05 dB at RF frequency of 50 MHz), as compared to the silicon counterparts. This is mainly due to excellent insulation property of glass. Following that, ion trapping test is performed on the glass trap and ions are successfully confined with an averaged lifetime of ~30 minutes (compatible with the 10-11 mbar vacuum level (10-13 Pa)). To simultaneously leverage the dielectric property of glass and the microfabrication compatibility of silicon, the integration of silicon ion trap and glass interposer is performed, between which TSV is used to build the vertical interconnection. Due to the incorporation of TSV, the original wire bonding pads as well as the connection circuits on the surface electrodes can be eliminated. As a result, the form factor of TSV integrated trap is reduced by ~10 times. Correspondingly, the parasitic capacitance between neighboring electrodes is reduced from >24 pF to 3 pF. Similarly, the insertion loss of TSV integrated trap drops to 0.11 dB, in sharp comparison to the previous traps on silicon substrates (up to 2.4 dB). Analytical models are built to respectively characterize the electrode capacitance and overall power loss, and a good agreement is achieved between the model and the measurement result. In addition, since TSV is located in the half space underneath the surface electrodes, the electrodes geometry design is enabled with high flexibility. Meanwhile, the laser obstruction issue due to the stick-out bonding wires has been resolved. In terms of the ion trapping performance, both the heating rate (17 quanta/ms for an axial frequency of 300 kHz) and the lifetime (~30 minutes) of TSV trap are comparable with non-cryogenic traps of similar dimensions. Moreover, a customized CPGA with patterned redistribution layer is used to locate TSV integrated trap directly in the absence of glass interposer, facilitating high-efficiency thermal management and upgrading the packaging flexibility. At the next stage, the co-integration of other functional modules such as silicon photonics and multilayer metallization with TSV trap is investigated. In silicon photonics module, waveguide and grating coupler are on-chip introduced in place of bulk optics to achieve localized light routing and emission. In multilayer metallization module, as a first step, a grounding plane is incorporated into TSV trap to shield the silicon substrate from RF signal, in which specific windows are patterned onto the plane to accommodate TSV and allow the transmission of lights. The compatibility between TSV/multilayer metallization and waveguide/grating coupler for electrical and optical (E/O) signal routing is demonstrated. The preliminary test result based on wafer frontside shows that a ~40% capacitance reduction is achieved, and the insertion loss further drops to 0.06 dB, close to the performance of glass trap. In addition, the simulation results on photonics components indicate that an overall coupling efficiency of <30 dB is obtained from the input fiber to the ion through the photonics circuit. However, the measured power loss for light with wavelength of 1092 nm is as high as 50 dB. The deviation between the simulation and measurement is largely due to the fabrication imperfection and the resultant sloped grating coupler profile. This thesis focuses on the scalability enhancement of ion trap by integrating TSV, silicon photonics and multilayer metallization into conventional ion trap. The results are promising and pave the way for the future large scale quantum computing based on trapped ion.
Abstract Experiments with trapped ions and neutral atoms typically employ optical modulators in order to control the phase, frequency, and amplitude of light directed to individual atoms. These elements are expensive, bulky, consume substantial power, and often rely on free-space I/O channels, all of which pose scaling challenges. To support many-ion systems like trapped-ion quantum computers or miniaturized deployable devices like clocks and sensors, these elements must ultimately be microfabricated, ideally monolithically with the trap to avoid losses associated with optical coupling between physically separate components. In this work we design, fabricate, and test an optical modulator capable of monolithic integration with a surface-electrode ion trap. These devices consist of piezo-optomechanical photonic integrated circuits configured as multi-stage Mach-Zehnder modulators that are used to control the intensity of light delivered to a single trapped ion on a separate chip. We use quantum tomography employing hundreds of multi-gate sequences to enhance the sensitivity of the fidelity to the types and magnitudes of gate errors relevant to quantum computing and better characterize the performance of the modulators, ultimately measuring single qubit gate fidelities that exceed 99.7%.
Trapped ions provide a high-fidelity platform for quantum information processing, yet delivery of multiple, distinct wavelengths across large networks of interaction zones remains a bottleneck. Conventional free-space light delivery lacks scalability, while on-chip grating couplers suffer from narrow operational bandwidth that increases circuit footprint and optical interfacing complexity. Here we show a broadband photonic integrated circuit capable of addressing individual ions. The circuit combines a planar waveguide lens with a micromirror fabricated using two-photon polymerization at wafer scale. This implementation can address three individual ions from λ = 405 - 880 nm with -27 dB average intensity crosstalk at 5μm pitch. We trap 40Ca+ and 138Ba+ ions above such devices, characterize optical crosstalk with barium ions, and demonstrate individual repumping of calcium ions. This monolithic photonic architecture brings broadband addressing in an on-chip modality to trapped-ion technology. More generally, integrating additive manufacturing into quantum devices is poised to unlock expanded design space for implementing novel quantum architectures.
To increase the power of a trapped-ion quantum information processor, the qubit number, gate speed, and gate fidelity must all increase. All three of these parameters are influenced by the trapping field, which, in turn, depends on the electrode geometry. Here, we consider how the electrode geometry affects the following radial trapping parameters: trap height, harmonicity, depth, and trap frequency. We introduce a simple multi-wafer geometry comprising a ground plane above a surface trap and compare the performance of this trap to a surface trap and a multi-wafer trap that is a miniaturized version of a linear Paul trap. We compare the voltage and frequency requirements needed to reach a desired radial trap frequency and find that the two multi-wafer trap designs provide significant improvements in expected power dissipation over the surface trap design in large part due to increased harmonicity. Finally, we consider the fabrication requirements and the path towards the integration of the necessary optical control. This work provides a basis to optimize future trap designs with scalability in mind.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
Quantum information processing is a new and exciting field which uses quantum mechanical systems to perform information processing. At the heart of the excitement are quantum computation - which promises efficient algorithms for simulating physical systems, factoring, and searching unsorted databases - and quantum communication - which provides a provably secure communications protocol. Trapped ions show much promise for achieving large-scale quantum information processing. Experiments thus far have demonstrated small algorithms and entanglement of two remote ions. Current work focuses on scaling to large numbers of ions for quantum computation and interconversion between trapped ions and photons for quantum communication. This thesis addresses some of the challenges facing scaling and interconversion for trapped ion quantum information processing. The first part of the thesis describes the development of scalable, multiplexed ion trap chips for quantum computation. The ion trap chips are based on a new ion trap geometry, called the surface-electrode trap, in which all of the electrodes reside in a single plane. Three generations of surface-electrode traps are designed, fabricated, and tested - culminating with the demonstration of an ion trap chip microfabricated using standard silicon VLSI materials and processes for scalability to small trap size and large arrays of interconnected ion traps. The second part of the thesis presents an experiment that demonstrates cavity cooling, a method of laser cooling the motional state of trapped ions without decohering the internal qubit state.