Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Sub-milikelvin Experimental Station in Synergetic Extreme Condition User Facility

Bingbing Tong, Jie Fan, X.N. Jing, Guangtong Liu, Junya Feng, Fanming Qu, Li Li

Published Jul 13, 2026• 0 citations
Publisher

Abstract

Abstract The Sub-milikelvin Experimental Station (C1 station) in Synergetic Extreme Condition User Facility consists of a dilution refrigerator for millikelvin-temperature experiments and a nuclear adiabatic demagnetization refrigerator (NADR) for sub-millikelvin temperature experiments. In the NADR, we have achieved temperatures as low as 0.32 mK while maintaining the capability to apply a 16 T magnetic field to the sample. The system can sustain temperatures below 1 mK for more than ten days. Under these conditions—ultra-low temperature, high magnetic field, and ultra-low noise—the Sub-milikelvin Experimental Station has enabled users to conduct a series of pioneering experimental studies.

DOI
10.1088/1674-1056/ae8a30

Related papers

High-Performance Cryogen-Free Platform for Microkelvin-Range Refrigeration

Ján Nyéki, Marijn Lucas, Petra Knappová +5 more

Accessibility to the microkelvin temperature regime is important for quantum technology research. Cryogen-free dilution refrigerators opened up the millikelvin temperature range, but the perception is that ultralow temperatures are difficult to reach and require specialist infrastructure. The authors report the design of a microkelvin platform based on a nuclear-demagnetization stage, engineered and optimized for operation on a cryogen-free dilution refrigerator. The study demonstrates temperatures as low as 395 $\ensuremath{\mu}$K, and a protocol that enables experiments operated below 1 mK for 95% of the time, providing an efficient cryogen-free microkelvin environment for a wide range of applications.

arXiv:2209.07903•Physical Review Applied•Oct 24, 2022•9 citations

Development of a Cryogen-Free Dilution Refrigerator for Superconducting Quantum Computing

Yujia Zhai, Shiguang Wu, Dong Ma +5 more

The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.

IEEE Transactions on Applied Superconductivity•Jan 8, 2024•2 citations

Magnetic Cooling and Vibration Isolation of a Sub-kHz Mechanical Resonator

Bernard van Heck, Tim M. Fuchs, Jaimy Plugge +2 more

Abstract We report recent progress toward the realization of a sub-mK, low-vibration environment at the bottom stage of a dry dilution refrigerator for use in mechanical tests of quantum mechanics. Using adiabatic nuclear demagnetization, we have cooled a silicon cantilever force sensor to $$T\approx 1$$ T ≈ 1 mK. The temperature of the tip holder of the cantilever chip was determined via a primary magnetic flux noise thermometer. The quality factor of the cantilever continues to increase with decreasing temperature, reaching $$Q\approx 4\cdot 10^4$$ Q ≈ 4 · 10 4 at 2 mK. To demonstrate that the vibration isolation is not compromised, we report the detection of the thermal motion of the cantilever down to $$T \approx 20$$ T ≈ 20 mK, only limited by the coupling to the SQUID readout circuit. We discuss feasible improvements that will allow us to probe unexplored regions of the parameter space of continuous spontaneous localization models.

arXiv:2208.11750•Journal of Low Temperature Physics•Feb 4, 2023•9 citations

Solid-state quantum computation station

Fanming Qu, Zhongqing Ji, Ye Tian +1 more

Solid-state quantum computation station belongs to the group 2 of manipulation of quantum state in the Synergetic Extreme Condition User Facility. Here we will first outline the research background, aspects, and objectives of the station, followed by a discussion of the recent scientific as well as technological progress in this field based on similar experimental facilities to be constructed in the station. Finally, a brief summary and research perspective will be presented.

Chinese Physics B•Jul 1, 2018•2 citations

Dilute helium mixtures at low temperatures : properties and cooling methods

Elias Pentti

This thesis describes experimental work on dilute mixtures of ³He in 4He, mainly at millikelvin temperatures. The isotopic helium mixture has the unique property of remaining a miscible liquid down to the absolute zero temperature. In the mK regime, it consists of two very different components: perfectly superfluid 4He, and a weakly interacting degenerate Fermi liquid of ³He, predicted by theory to undergo transition to the superfluid state at an extremely low temperature. To discover that transition, new ways of cooling helium mixtures need to be developed, as it is not likely that the conventional method of nuclear demagnetization of copper can be improved to reach helium temperatures notably below the temperatures of order 0.1 mK attained so far. Adiabatic melting of 4He in the presence of liquid ³He is probably the most promising method of cooling helium mixtures to microkelvin temperatures. It produces helium mixture colder than the initial temperature as a direct consequence of the mixing of the isotopes. The starting configuration is attainable by pressurizing liquid helium mixture to its solidification pressure at a temperature below some tens of mK, as only 4He then enters the solid phase. This thesis describes an experiment in which the method of adiabatic melting was, for the first time, realized at sub-millikelvin temperatures, where the superfluidity of the pure ³He phase enables, in principle, a drastic decrease of temperature. In the experiments, cooling from initial temperatures between 0.3 and 0.9 mK was detected, temperature reduction remaining below a factor of two for recognized reasons of a technical rather than fundamental nature. A capacitive differential pressure transducer, constructed for the experiment, was used for high accuracy measurements of the temperature dependence of the melting pressure of helium mixtures with several ³He concentrations. The melting pressure is suitable for thermometry and carries information on the interactions of ³He particles in the mixture. Also, the response of a quartz tuning fork immersed in helium was studied. Its sensitivity to the properties of the surrounding fluid was utilized to determine the saturation concentration of dilute ³He across the entire accessible pressure range. The tuning fork was found to exhibit a complex pattern of anomalies attributed to resonant modes of second sound, or concentration waves, inside its cylindrical container.

•Jan 1, 2009•0 citations

Superconducting microwave resonator for millikelvin magnetic resonance force microscopy

H. Jonathon Mamin, Raffi Budakian, D. Rugar

We have fabricated a superconducting resonator capable of generating a strong microwave magnetic field in a small (100 μm) volume for low temperature magnetic resonance experiments. While the resonator was specifically developed for use at millikelvin temperatures in a dilution refrigerator, where the total cooling power is limited to a few hundred microwatts, it is also useful at temperatures up to 5 K. The resonator consists of a 220 μm diameter, 2-1/2 turn niobium coil resonating with a short section of niobium microstripline. At a resonance frequency of 3 GHz, the loaded Q of the resonator was 780. The field strength was characterized by performing electron spin nutations. Operating at 100 mK with 320 μW of dissipated power, the resonator generated a field of 4 G at a distance of 100 μm from the coil.

Review of Scientific Instruments•May 1, 2003•18 citations
Abstract The Sub-milikelvin Experimental Station (C1 station) in Synergetic Extreme Condition User Facility consists of a dilution refrigerator for millikelvin-temperature experiments and a nuclear adiabatic demagnetization refrigerator (NADR) for sub-millikelvin temperature experiments. In the NADR, we have achieved temperatures as low as 0.32 mK while maintaining the capability to apply a 16 T magnetic field to the sample. The system can sustain temperatures below 1 mK for more than ten days. Under these conditions—ultra-low temperature, high magnetic field, and ultra-low noise—the Sub-milikelvin Experimental Station has enabled users to conduct a series of pioneering experimental studies.
Accessibility to the microkelvin temperature regime is important for quantum technology research. Cryogen-free dilution refrigerators opened up the millikelvin temperature range, but the perception is that ultralow temperatures are difficult to reach and require specialist infrastructure. The authors report the design of a microkelvin platform based on a nuclear-demagnetization stage, engineered and optimized for operation on a cryogen-free dilution refrigerator. The study demonstrates temperatures as low as 395 $\ensuremath{\mu}$K, and a protocol that enables experiments operated below 1 mK for 95% of the time, providing an efficient cryogen-free microkelvin environment for a wide range of applications.
The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.
Abstract We report recent progress toward the realization of a sub-mK, low-vibration environment at the bottom stage of a dry dilution refrigerator for use in mechanical tests of quantum mechanics. Using adiabatic nuclear demagnetization, we have cooled a silicon cantilever force sensor to T≈1T\approx 1T≈1 T ≈ 1 mK. The temperature of the tip holder of the cantilever chip was determined via a primary magnetic flux noise thermometer. The quality factor of the cantilever continues to increase with decreasing temperature, reaching Q≈4⋅104Q\approx 4\cdot 10^4Q≈4⋅104 Q ≈ 4 · 10 4 at 2 mK. To demonstrate that the vibration isolation is not compromised, we report the detection of the thermal motion of the cantilever down to T≈20T \approx 20T≈20 T ≈ 20 mK, only limited by the coupling to the SQUID readout circuit. We discuss feasible improvements that will allow us to probe unexplored regions of the parameter space of continuous spontaneous localization models.
This thesis describes experimental work on dilute mixtures of ³He in 4He, mainly at millikelvin temperatures. The isotopic helium mixture has the unique property of remaining a miscible liquid down to the absolute zero temperature. In the mK regime, it consists of two very different components: perfectly superfluid 4He, and a weakly interacting degenerate Fermi liquid of ³He, predicted by theory to undergo transition to the superfluid state at an extremely low temperature. To discover that transition, new ways of cooling helium mixtures need to be developed, as it is not likely that the conventional method of nuclear demagnetization of copper can be improved to reach helium temperatures notably below the temperatures of order 0.1 mK attained so far. Adiabatic melting of 4He in the presence of liquid ³He is probably the most promising method of cooling helium mixtures to microkelvin temperatures. It produces helium mixture colder than the initial temperature as a direct consequence of the mixing of the isotopes. The starting configuration is attainable by pressurizing liquid helium mixture to its solidification pressure at a temperature below some tens of mK, as only 4He then enters the solid phase. This thesis describes an experiment in which the method of adiabatic melting was, for the first time, realized at sub-millikelvin temperatures, where the superfluidity of the pure ³He phase enables, in principle, a drastic decrease of temperature. In the experiments, cooling from initial temperatures between 0.3 and 0.9 mK was detected, temperature reduction remaining below a factor of two for recognized reasons of a technical rather than fundamental nature. A capacitive differential pressure transducer, constructed for the experiment, was used for high accuracy measurements of the temperature dependence of the melting pressure of helium mixtures with several ³He concentrations. The melting pressure is suitable for thermometry and carries information on the interactions of ³He particles in the mixture. Also, the response of a quartz tuning fork immersed in helium was studied. Its sensitivity to the properties of the surrounding fluid was utilized to determine the saturation concentration of dilute ³He across the entire accessible pressure range. The tuning fork was found to exhibit a complex pattern of anomalies attributed to resonant modes of second sound, or concentration waves, inside its cylindrical container.
We have fabricated a superconducting resonator capable of generating a strong microwave magnetic field in a small (100 μm) volume for low temperature magnetic resonance experiments. While the resonator was specifically developed for use at millikelvin temperatures in a dilution refrigerator, where the total cooling power is limited to a few hundred microwatts, it is also useful at temperatures up to 5 K. The resonator consists of a 220 μm diameter, 2-1/2 turn niobium coil resonating with a short section of niobium microstripline. At a resonance frequency of 3 GHz, the loaded Q of the resonator was 780. The field strength was characterized by performing electron spin nutations. Operating at 100 mK with 320 μW of dissipated power, the resonator generated a field of 4 G at a distance of 100 μm from the coil.