Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

Potassium Faraday lasers for atomic magnetometry

Anonymous, Yuefeng Lu, Baichuan Li, Xiaoliang Li, Tiantian Shi, Teng Wu, 党安红, Jingbiao Chen

Published Jul 10, 2026• 0 citations
Publisher

Abstract

The atomic magnetometer exhibits high sensitivity in weak magnetic field detection, with diverse applications in dark matter detection, biomagnetic sensing, wireless communication, etc. However, its performance, especially in environmental robustness and sensitivity, is largely limited by laser characteristics. Here, we realized two potassium Faraday lasers operating at potassium D1 (770 nm) and D2 (767 nm) lines, serving as pump and probe lasers for a potassium atomic magnetometer. Utilizing the Faraday anomalous dispersive effect for frequency selection, the lasers achieve automatic wavelength locking within the atomic Doppler broadening, enabling robust, self-stabilizing operation without tedious adjustments. Furthermore, both lasers exhibit strong immunity to environmental disturbances, such as vibration and temperature variations. By implementing the modulation transfer spectroscopy (MTS) technique, the frequency stability of the pump laser and probe laser reaches approximately 5.1 × 10 − 13 / τ and 6.2 × 10 − 13 / τ , respectively. Notably, the optimized frequency stability is accompanied by better power stability, showing threefold and fivefold improvements over their free-running counterparts, which reaches the 10 − 5 level at 1 s. The enhancements in laser performance directly improved the magnetometer’s performance, yielding a magnetic noise floor of approximately 100 fT / Hz at 10 Hz under a bias field of 1000 nT. Therefore, with hands-off operation, environmental robustness and competitive sensitivity, this achievement holds promising prospects for both laboratory and field-deployable applications.

DOI
10.1103/h5ch-ysjv

Related papers

Wavelength switchable potassium Faraday laser

Ziqi Lu, Hangbo Shi, Suyang Wei +7 more

A laser with a switchable wavelength between 770 nm and 767 nm, corresponding to the potassium D1 and D2 lines, is a promising tool for manipulating potassium atoms. Here, we develop a potassium Faraday laser using a potassium atom-based Faraday anomalous dispersion optical filter (FADOF) as its frequency selection element. By dynamically adjusting the central frequency of the peak transmission across the entire transmitted spectrum of the potassium FADOF, the laser can operate either in single mode at either 770 nm or 767 nm, or emit both simultaneously. In single-mode operation, the laser wavelength remains aligned with the atomic transitions, exhibiting a narrow linewidth of 14.96 kHz at 770 nm and 13.07 kHz at 767 nm. In dual-mode operation, both modes are sustained continuously, with frequency drifts of less than 0.3 GHz for 200 minutes. Furthermore, we perform modulation transfer spectroscopy (MTS) and stabilize the laser to the 39 K 4S 1/2 F = (1, 2) → 4P 1/2 F ′ = 2 and 4S 1/2 F = (1, 2) → 4P 3/2 F ′ transitions. The corresponding frequency stability, measured by the optical heterodyne beat note between two identical systems, is 1.57 × 10 −12 and 8.77 × 10 −13 at 1 s, respectively. This architecture introduces a novel approach to the generation of wide-range wavelength switching within a single laser. In addition, with its narrow linewidth and impressive frequency stability, it serves as a reliable source for ultracold atom physics and quantum precision measurement.

Optics Express•Jul 3, 2026•0 citations

A Potassium Faraday Laser with Wavelength Automatically Corresponding to 39K D2 Transition

Ziqi Lu, Tiantian Shi, Anhong Dang +1 more

SummaryWe propose a potassium Faraday laser using a potassium atom-based Faraday anomalous dispersion optical filter (FADOF) as the frequency selection element. By adjusting the transmission spectrum of the potassium FADOF, the potassium Faraday laser achieves single-mode operation, with the wavelength automatically covering all the39K D2 transitions. During free-running, the wavelength fluctuation is less than 0.4 pm over 3.5 hours measured by a wavelength meter, with the frequency stability of 5.70 × 10-10at 1 s measured by optical heterodyne between two identical systems. After using modulation transfer spectroscopy (MTS) to stabilize the laser, the frequency stability is 6.22×10-13at 1 s. This potassium Faraday laser system is a desirable option for applications including potassium magnetometers, laser cooling and frequency standards.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 12, 2025•0 citations

Switchable Faraday laser with frequencies of 85Rb and 87Rb 780 nm transitions using a single isotope 87Rb Faraday atomic filter

Xiaomin Qin, Zijie Liu, Hangbo Shi +4 more

In the development of atomic physics, laser sources with Frequencies corresponding to atomic transition and high stability are essential. The Faraday laser is a special diode laser using the Faraday anomalous dispersion optical filter (FADOF) to realize frequency selection, so the output laser frequency is automatically limited to the atomic Doppler broadening. However, the frequency of a Faraday laser corresponds to the range around only one atomic hyperfine transition. Here, we realize a switchable Faraday laser with two isotopes laser frequencies corresponding to 85Rb 52S1/2 (F=3)→52P3/2 and 87Rb 52S1/2 (F=2)→52P3/2 transitions based on a single isotope 87Rb-FADOF. The laser has good robustness against the fluctuation of diode current and temperature, with wavelength fluctuating within 0.8 pm from 16 to 30 °C of diode temperature, and has a free-running linewidth of 18 kHz. We also lock the laser frequency to the two cycling transitions of 85Rb 52S1/2 (F=3)→52P3/2 (F′=4) and 87Rb 52S1/2 (F=2)→52P3/2 (F′=3) by the modulation transfer spectroscopy technique. The Allan deviation of the residual error signal is 3×10−14/τ, and the frequency stability of the beat detection reaches 2.8×10−12 at 1 s integration time. This 780 nm switchable Faraday laser expands the application scenarios of Faraday lasers, which can be used in laser cooling atoms, optical frequency standards, and other quantum precision measurement fields.

Applied Physics Letters•Apr 15, 2024•20 citations

Polarization anisotropy in absorption enhanced modulation transfer spectroscopy and laser locking for Rb D 1 line

Wen-Lei Zhao, Xinxiu Zhou, Wenxiang Xie +2 more

In a spin-exchange relaxation-free (SERF) atomic magnetometer, the pump and probe laser frequencies are tuned to the D 1 transition line of alkali metal atoms to enhance measurement sensitivity. The D 1 line, a non-cycling transition, exhibits a low absorption coefficient. This study theoretically analyzes the influence of different parameters on the absorption coefficient of the D 1 line and proposes a polarization-dependent approach to enhance it. A frequency stabilization method based on modulation transfer spectroscopy (MTS) with an enhanced absorption coefficient is introduced. Compared with the conventional method, optimizing the probe beam’s polarization increases the absorption coefficient, raising the amplitude of the MTS signal. The results show that using a stronger MTS signal for frequency stabilization reduces the laser's frequency noise. Using heterodyne measurement, we characterize the linewidth-narrowing effect of MTS locking and evaluate the frequency stability of the locked laser. The linewidth of each laser is reduced from the free-running 2.2 MHz to 885 kHz after MTS stabilization. The Allan deviation measurements of the beat signal between two locked lasers are 2.6 × 10 −11 / τ . This work provides a stable optical frequency reference for SERF atomic magnetometers and offers potential applications in extracting spatial information from optically pumped atoms.

Optics Express•May 16, 2025•5 citations

Compact 852 nm Faraday optical frequency standard

Zhiyang Wang, Zijie Liu, Jyoti +7 more

Optical clocks with high precision are practical and necessary in atomic physics, geodesy, gravitational wave measurement, etc. Transportability and environmental adaptability are two key indicators to measure the performance of frequency standards. Here, we utilized a highly robust atomic-filter-based Faraday laser as the local oscillator, and achieved two compact Faraday optical frequency standards based on 133Cs6S1/2|F=3⟩→6P3/2|F′=2⟩ and 6S1/2|F=4⟩→6P3/2|F′=5⟩ transitions at 852 nm, leveraging modulation transfer spectroscopy for laser frequency stabilization. The Faraday laser automatically aligns atomic transition spectral lines, due to the use of atomic filters as frequency selective elements. Therefore, the laser wavelength has strong robustness against environmental changes. This setup not only simplifies the operational complexity but also ensures frequency stability. By heterodyne beating between two such compact optical frequency standards, the beatnote achieved a short-term frequency stability of 1.68 × 10−13 at 3 s, remained at the 10−13 level for up to 400 s, and stayed below 2.7 × 10−12 for up to 1600 s, predominantly exhibiting white frequency noise. This underscores the potential of atomic-filter-based Faraday laser in realizing compact and stable frequency standards, mitigating coherent communication error rates, and enhancing the precision of quantum interferometric measurements. Moreover, this approach eliminates the continuous need for external monitoring and adjustments, thereby, offering a practical and robust solution for out of laboratory applications demanding high frequency stability.

Applied Physics Letters•Jan 20, 2025•8 citations

Broadband Ultra-Sensitive Adiabatic Magnetometer

Igor Savukov, Young Jin Kim

We introduce a new ultra-sensitive adiabatic magnetometer that has a broad bandwidth and can operate in the presence of magnetic fields and gradients. It follows conceptually typical implementations of atomic magnetometers based on alkali-metal vapor cells and lasers for optical pumping and optical Faraday effect detection, while its unique feature is a measurement of an oscillating magnetic field along the probe beam direction at frequencies lower than the resonant frequency, proportional to a static magnetic field along the pump beam direction. The bandwidth of the adiabatic magnetometer scales as the strength of the field along the pump beam. From our theoretical studies it is expected that the adiabatic magnetometer can reach 1 fT sensitivity with a bandwidth of 10 kHz, which any type of atomic magnetometers cannot achieve. Among anticipated various applications of this adiabatic magnetometer are biomagnetic sensing, nuclear magnetic resonance detection, and alkali-metal density measurements. We experimentally conducted alkali-metal density measurements, as an example of applications.

IEEE Sensors Applications Symposium (SAS)•Aug 23, 2021•1 citation
The atomic magnetometer exhibits high sensitivity in weak magnetic field detection, with diverse applications in dark matter detection, biomagnetic sensing, wireless communication, etc. However, its performance, especially in environmental robustness and sensitivity, is largely limited by laser characteristics. Here, we realized two potassium Faraday lasers operating at potassium D1 (770 nm) and D2 (767 nm) lines, serving as pump and probe lasers for a potassium atomic magnetometer. Utilizing the Faraday anomalous dispersive effect for frequency selection, the lasers achieve automatic wavelength locking within the atomic Doppler broadening, enabling robust, self-stabilizing operation without tedious adjustments. Furthermore, both lasers exhibit strong immunity to environmental disturbances, such as vibration and temperature variations. By implementing the modulation transfer spectroscopy (MTS) technique, the frequency stability of the pump laser and probe laser reaches approximately 5.1 × 10 − 13 / τ and 6.2 × 10 − 13 / τ , respectively. Notably, the optimized frequency stability is accompanied by better power stability, showing threefold and fivefold improvements over their free-running counterparts, which reaches the 10 − 5 level at 1 s. The enhancements in laser performance directly improved the magnetometer’s performance, yielding a magnetic noise floor of approximately 100 fT / Hz at 10 Hz under a bias field of 1000 nT. Therefore, with hands-off operation, environmental robustness and competitive sensitivity, this achievement holds promising prospects for both laboratory and field-deployable applications.
A laser with a switchable wavelength between 770 nm and 767 nm, corresponding to the potassium D1 and D2 lines, is a promising tool for manipulating potassium atoms. Here, we develop a potassium Faraday laser using a potassium atom-based Faraday anomalous dispersion optical filter (FADOF) as its frequency selection element. By dynamically adjusting the central frequency of the peak transmission across the entire transmitted spectrum of the potassium FADOF, the laser can operate either in single mode at either 770 nm or 767 nm, or emit both simultaneously. In single-mode operation, the laser wavelength remains aligned with the atomic transitions, exhibiting a narrow linewidth of 14.96 kHz at 770 nm and 13.07 kHz at 767 nm. In dual-mode operation, both modes are sustained continuously, with frequency drifts of less than 0.3 GHz for 200 minutes. Furthermore, we perform modulation transfer spectroscopy (MTS) and stabilize the laser to the 39 K 4S 1/2 F = (1, 2) → 4P 1/2 F ′ = 2 and 4S 1/2 F = (1, 2) → 4P 3/2 F ′ transitions. The corresponding frequency stability, measured by the optical heterodyne beat note between two identical systems, is 1.57 × 10 −12 and 8.77 × 10 −13 at 1 s, respectively. This architecture introduces a novel approach to the generation of wide-range wavelength switching within a single laser. In addition, with its narrow linewidth and impressive frequency stability, it serves as a reliable source for ultracold atom physics and quantum precision measurement.
SummaryWe propose a potassium Faraday laser using a potassium atom-based Faraday anomalous dispersion optical filter (FADOF) as the frequency selection element. By adjusting the transmission spectrum of the potassium FADOF, the potassium Faraday laser achieves single-mode operation, with the wavelength automatically covering all the39K D2 transitions. During free-running, the wavelength fluctuation is less than 0.4 pm over 3.5 hours measured by a wavelength meter, with the frequency stability of 5.70 × 10-10at 1 s measured by optical heterodyne between two identical systems. After using modulation transfer spectroscopy (MTS) to stabilize the laser, the frequency stability is 6.22×10-13at 1 s. This potassium Faraday laser system is a desirable option for applications including potassium magnetometers, laser cooling and frequency standards.
In the development of atomic physics, laser sources with Frequencies corresponding to atomic transition and high stability are essential. The Faraday laser is a special diode laser using the Faraday anomalous dispersion optical filter (FADOF) to realize frequency selection, so the output laser frequency is automatically limited to the atomic Doppler broadening. However, the frequency of a Faraday laser corresponds to the range around only one atomic hyperfine transition. Here, we realize a switchable Faraday laser with two isotopes laser frequencies corresponding to 85Rb 52S1/2 (F=3)→52P3/2 and 87Rb 52S1/2 (F=2)→52P3/2 transitions based on a single isotope 87Rb-FADOF. The laser has good robustness against the fluctuation of diode current and temperature, with wavelength fluctuating within 0.8 pm from 16 to 30 °C of diode temperature, and has a free-running linewidth of 18 kHz. We also lock the laser frequency to the two cycling transitions of 85Rb 52S1/2 (F=3)→52P3/2 (F′=4) and 87Rb 52S1/2 (F=2)→52P3/2 (F′=3) by the modulation transfer spectroscopy technique. The Allan deviation of the residual error signal is 3×10−14/τ, and the frequency stability of the beat detection reaches 2.8×10−12 at 1 s integration time. This 780 nm switchable Faraday laser expands the application scenarios of Faraday lasers, which can be used in laser cooling atoms, optical frequency standards, and other quantum precision measurement fields.
In a spin-exchange relaxation-free (SERF) atomic magnetometer, the pump and probe laser frequencies are tuned to the D 1 transition line of alkali metal atoms to enhance measurement sensitivity. The D 1 line, a non-cycling transition, exhibits a low absorption coefficient. This study theoretically analyzes the influence of different parameters on the absorption coefficient of the D 1 line and proposes a polarization-dependent approach to enhance it. A frequency stabilization method based on modulation transfer spectroscopy (MTS) with an enhanced absorption coefficient is introduced. Compared with the conventional method, optimizing the probe beam’s polarization increases the absorption coefficient, raising the amplitude of the MTS signal. The results show that using a stronger MTS signal for frequency stabilization reduces the laser's frequency noise. Using heterodyne measurement, we characterize the linewidth-narrowing effect of MTS locking and evaluate the frequency stability of the locked laser. The linewidth of each laser is reduced from the free-running 2.2 MHz to 885 kHz after MTS stabilization. The Allan deviation measurements of the beat signal between two locked lasers are 2.6 × 10 −11 / τ . This work provides a stable optical frequency reference for SERF atomic magnetometers and offers potential applications in extracting spatial information from optically pumped atoms.
Optical clocks with high precision are practical and necessary in atomic physics, geodesy, gravitational wave measurement, etc. Transportability and environmental adaptability are two key indicators to measure the performance of frequency standards. Here, we utilized a highly robust atomic-filter-based Faraday laser as the local oscillator, and achieved two compact Faraday optical frequency standards based on 133Cs6S1/2|F=3⟩→6P3/2|F′=2⟩ and 6S1/2|F=4⟩→6P3/2|F′=5⟩ transitions at 852 nm, leveraging modulation transfer spectroscopy for laser frequency stabilization. The Faraday laser automatically aligns atomic transition spectral lines, due to the use of atomic filters as frequency selective elements. Therefore, the laser wavelength has strong robustness against environmental changes. This setup not only simplifies the operational complexity but also ensures frequency stability. By heterodyne beating between two such compact optical frequency standards, the beatnote achieved a short-term frequency stability of 1.68 × 10−13 at 3 s, remained at the 10−13 level for up to 400 s, and stayed below 2.7 × 10−12 for up to 1600 s, predominantly exhibiting white frequency noise. This underscores the potential of atomic-filter-based Faraday laser in realizing compact and stable frequency standards, mitigating coherent communication error rates, and enhancing the precision of quantum interferometric measurements. Moreover, this approach eliminates the continuous need for external monitoring and adjustments, thereby, offering a practical and robust solution for out of laboratory applications demanding high frequency stability.
We introduce a new ultra-sensitive adiabatic magnetometer that has a broad bandwidth and can operate in the presence of magnetic fields and gradients. It follows conceptually typical implementations of atomic magnetometers based on alkali-metal vapor cells and lasers for optical pumping and optical Faraday effect detection, while its unique feature is a measurement of an oscillating magnetic field along the probe beam direction at frequencies lower than the resonant frequency, proportional to a static magnetic field along the pump beam direction. The bandwidth of the adiabatic magnetometer scales as the strength of the field along the pump beam. From our theoretical studies it is expected that the adiabatic magnetometer can reach 1 fT sensitivity with a bandwidth of 10 kHz, which any type of atomic magnetometers cannot achieve. Among anticipated various applications of this adiabatic magnetometer are biomagnetic sensing, nuclear magnetic resonance detection, and alkali-metal density measurements. We experimentally conducted alkali-metal density measurements, as an example of applications.