Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Jurnal Pendidikan Sains Geologi dan Geofisika (GeoScienceEd Journal)

CRAB Pulse Optimization for Transmon CNOT Gate with Leakage and Decoherence

Ridhwan Dery Iradat, Juri Pebrianto

Published Jul 3, 2026• 0 citations
Publisher

Abstract

High-fidelity two-qubit gates are essential for scalable quantum computation in superconducting transmon circuits. However, weak anharmonicity can induce leakage outside the computational subspace, while relaxation and dephasing reduce gate fidelity. This study presents a numerical simulation of a CNOT gate in a coupled two-transmon system. Each transmon is modeled as a three-level system, where |0⟩ and |1⟩ form the computational subspace, while |2⟩ is included to evaluate leakage. The control pulses are optimized using a two-channel chopped random basis (CRAB) method. The pulse u_1 (t) is applied to the control transmon as the main drive, while u_2 (t) is applied to the target transmon as a correction drive. The system is simulated under closed- and open-system conditions. In the open system, energy relaxation and pure dephasing are included through the Lindblad master equation. CRAB optimization improves the CNOT basis fidelity from 0.65 to 0.96 in the closed system and from 0.65 to 0.95 in the open system. The final leakage remains small, around 10^(-3). These results indicate that the correction drive can improve CNOT gate performance while keeping leakage low.

DOI
10.29303/goescienceed.v7i3.2433

Related papers

Robustness of error-suppressing entangling gates in cavity-coupled transmon qubits

Xiu–Hao Deng, Edwin Barnes, Sophia E. Economou

Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.

arXiv:1703.03514•Physical review. B./Physical review. B•Jul 27, 2017•33 citations

Leakage reduction in fast superconducting qubit gates via optimal control

M. Werninghaus, D. J. Egger, F. Roy +3 more

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

arXiv:2003.05952•npj Quantum Information•Jan 29, 2021•217 citations

Anharmonicity-limited gate-time boundaries in transmon single-qubit quantum gates

Deniz Türkpençe, Selçuk Çakmak

Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.

arXiv:2509.23467•Journal of the Optical Society of America B•Dec 19, 2025•2 citations

Supercomputer simulations of transmon quantum computers

Dennis Willsch

We develop a simulator for quantum computers composed of superconducting transmon qubits. The simulation model supports an arbitrary number of transmons and resonators. Quantum gates are implemented by time-dependent pulses. Nontrivial effects such as crosstalk, leakage to non-computational states, entanglement between transmons and resonators, and control errors due to the pulses are inherently included. The time evolution of the quantum computer is obtained by solving the time-dependent Schrödinger equation. The simulation algorithm shows excellent scalability on high-performance supercomputers. We present results for the simulation of up to 16 transmons and resonators. Additionally, the model can be used to simulate environments, and we demonstrate the transition from an isolated system to an open quantum system governed by a Lindblad master equation. We also describe a procedure to extract model parameters from electromagnetic simulations or experiments. We compare simulation results to experiments on several NISQ processors of the IBM Q Experience. We find nearly perfect agreement between simulation and experiment for quantum circuits designed to probe crosstalk in transmon systems. By studying common gate metrics such as the fidelity or the diamond distance, we find that they cannot reliably predict the performance of repeated gate applications or practical quantum algorithms. As an alternative, we find that the results from two-transmon gate set tomography have an exceptional predictive power. Finally, we test a protocol from the theory of quantum error correction and fault tolerance. We find that the protocol systematically improves the performance of transmon quantum computers in the presence of characteristic control and measurement errors.

arXiv:2008.13490•Jan 1, 2020•8 citations

Flux-Pulsed Two-Qubit Gates in Transmons: Simulation, Pulse Shaping, and Calibration

Göktuğ Yavasoglu

The main source of error for superconducting quantum processors today is two-qubit gates, so understanding what limits their fidelity is central to improving these devices. This thesis studies the controlled-Z (CZ) gate between two transmon qubits, realized by tuning the $|11\rangle$ and $|20\rangle$ states through an avoided crossing with a flux pulse. There are two primary errors inherent to this approach. The first is leakage into non-computational states like $|20\rangle$; the second is an exchange error from population transferring between the single-excitation states $|01\rangle$ and $|10\rangle$. Using a closed-system simulation, this work compares four flux-pulse shapes (unipolar, net-zero bipolar, Gaussian-filtered bipolar, and adiabatic) and constructs a CNOT from each CZ. The central question is which error channel sets the gate fidelity, and whether the widely used net-zero pulse, known to protect neighboring qubits, also helps inside the gate itself. An important finding of this research is that every type of flux pulse has an average gate fidelity limited by exchange error rather than leakage. While the exchange error is not apparent in the return of the $|11\rangle$ population, because excitation-number conservation prevents $|11\rangle$ from entering the single-excitation sector, it does appear as an off-diagonal term in the CZ unitary, and subsequently in the CNOT. A second finding concerns the net-zero pulse: although its zero net flux integral cancels the first-order phase imprinted on neighboring qubits, it does not suppress the exchange error. The strong suppression observed in the analytic bipolar gate happens because its idle time leaves the exchange oscillation near a cancellation point at the end of the gate, not because the pulse is net-zero. The flux operating point predicted by the simulation was tested on a physical transmon device accessed remotely, where a square pulse produced a $180^\circ$ conditional phase close to the simulated flux and duration. Because the model is closed-system, the reported fidelities describe the coherent error of each pulse rather than the total infidelity of a physical device.

•Jun 27, 2026•0 citations

Reducing Leakage of Single-Qubit Gates for Superconducting Quantum Processors Using Analytical Control Pulse Envelopes

Eric Hyyppä, Antti P. Vepsäläinen, Miha Papič +10 more

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

arXiv:2402.17757•PRX Quantum•Sep 19, 2024•85 citations
High-fidelity two-qubit gates are essential for scalable quantum computation in superconducting transmon circuits. However, weak anharmonicity can induce leakage outside the computational subspace, while relaxation and dephasing reduce gate fidelity. This study presents a numerical simulation of a CNOT gate in a coupled two-transmon system. Each transmon is modeled as a three-level system, where |0⟩ and |1⟩ form the computational subspace, while |2⟩ is included to evaluate leakage. The control pulses are optimized using a two-channel chopped random basis (CRAB) method. The pulse u_1 (t) is applied to the control transmon as the main drive, while u_2 (t) is applied to the target transmon as a correction drive. The system is simulated under closed- and open-system conditions. In the open system, energy relaxation and pure dephasing are included through the Lindblad master equation. CRAB optimization improves the CNOT basis fidelity from 0.65 to 0.96 in the closed system and from 0.65 to 0.95 in the open system. The final leakage remains small, around 10^(-3). These results indicate that the correction drive can improve CNOT gate performance while keeping leakage low.
Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.
Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.
Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.
We develop a simulator for quantum computers composed of superconducting transmon qubits. The simulation model supports an arbitrary number of transmons and resonators. Quantum gates are implemented by time-dependent pulses. Nontrivial effects such as crosstalk, leakage to non-computational states, entanglement between transmons and resonators, and control errors due to the pulses are inherently included. The time evolution of the quantum computer is obtained by solving the time-dependent Schrödinger equation. The simulation algorithm shows excellent scalability on high-performance supercomputers. We present results for the simulation of up to 16 transmons and resonators. Additionally, the model can be used to simulate environments, and we demonstrate the transition from an isolated system to an open quantum system governed by a Lindblad master equation. We also describe a procedure to extract model parameters from electromagnetic simulations or experiments. We compare simulation results to experiments on several NISQ processors of the IBM Q Experience. We find nearly perfect agreement between simulation and experiment for quantum circuits designed to probe crosstalk in transmon systems. By studying common gate metrics such as the fidelity or the diamond distance, we find that they cannot reliably predict the performance of repeated gate applications or practical quantum algorithms. As an alternative, we find that the results from two-transmon gate set tomography have an exceptional predictive power. Finally, we test a protocol from the theory of quantum error correction and fault tolerance. We find that the protocol systematically improves the performance of transmon quantum computers in the presence of characteristic control and measurement errors.
The main source of error for superconducting quantum processors today is two-qubit gates, so understanding what limits their fidelity is central to improving these devices. This thesis studies the controlled-Z (CZ) gate between two transmon qubits, realized by tuning the ∣11⟩|11\rangle∣11⟩ and ∣20⟩|20\rangle∣20⟩ states through an avoided crossing with a flux pulse. There are two primary errors inherent to this approach. The first is leakage into non-computational states like ∣20⟩|20\rangle∣20⟩; the second is an exchange error from population transferring between the single-excitation states ∣01⟩|01\rangle∣01⟩ and ∣10⟩|10\rangle∣10⟩. Using a closed-system simulation, this work compares four flux-pulse shapes (unipolar, net-zero bipolar, Gaussian-filtered bipolar, and adiabatic) and constructs a CNOT from each CZ. The central question is which error channel sets the gate fidelity, and whether the widely used net-zero pulse, known to protect neighboring qubits, also helps inside the gate itself. An important finding of this research is that every type of flux pulse has an average gate fidelity limited by exchange error rather than leakage. While the exchange error is not apparent in the return of the ∣11⟩|11\rangle∣11⟩ population, because excitation-number conservation prevents ∣11⟩|11\rangle∣11⟩ from entering the single-excitation sector, it does appear as an off-diagonal term in the CZ unitary, and subsequently in the CNOT. A second finding concerns the net-zero pulse: although its zero net flux integral cancels the first-order phase imprinted on neighboring qubits, it does not suppress the exchange error. The strong suppression observed in the analytic bipolar gate happens because its idle time leaves the exchange oscillation near a cancellation point at the end of the gate, not because the pulse is net-zero. The flux operating point predicted by the simulation was tested on a physical transmon device accessed remotely, where a square pulse produced a 180∘180^\circ180∘ conditional phase close to the simulated flux and duration. Because the model is closed-system, the reported fidelities describe the coherent error of each pulse rather than the total infidelity of a physical device.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024