We present the Transduction-Enabled Superconducting Quantum Repeater (TESQR), a hybrid architecture for long-distance entanglement distribution that replaces probabilistic optical Bell-state measurements (BSMs) with high-fidelity superconducting quantum processing. By converting optical photons to microwave photons at the repeater node and performing gate-based entanglement swapping on superconducting qubits, TESQR guarantees a final entangled state at every trial. Under realistic noise models and fiber losses, we demonstrate end-to-end fidelities above 0.5 at 40 km total distance, with average and peak improvements of 63% and 159%, respectively, in entanglement distribution rates over purely photonic counterparts.
We present the Transduction-Enabled Superconducting Quantum Repeater (TESQR), a hybrid architecture for long-distance entanglement distribution that replaces probabilistic optical Bell-state measurements (BSMs) with high-fidelity superconducting quantum processing. By converting optical photons to microwave photons at the repeater node and performing gate-based entanglement swapping on superconducting qubits, TESQR guarantees a final entangled state at every trial. Under realistic noise models and fiber losses, we demonstrate end-to-end fidelities above 0.5 at 40 km total distance, with average and peak improvements of 63% and 159%, respectively, in entanglement distribution rates over purely photonic counterparts.
Long-distance entanglement distribution is hindered by photon loss in optical fibers and the nocloning theorem. Optical quantum repeater (QR) protocols rely on Bell state measurements (BSMs), they are intrinsically limited to probabilistic photon operations and fail 50% of the time. We propose a hybrid approach to building quantum repeaters that combines the high transmission speed of photonic qubits in optical fiber with the high-fidelity quantum processing capabilities enabled by superconducting circuits. The transduction-enabled superconducting QR (TESQR) architecture eliminates the need for probabilistic BSMs and allows deterministic processing operations. The TESQR framework always yields a final state at the remote nodes rather than aborting on photon loss, manifesting deterministic entanglement distribution within certain parameter regimes. We evaluate the performance by assessing output-state fidelities and success probabilities of entanglement distribution using realistic noise models. Additionally, we integrate an entanglement purification scheme and evaluate the performance through numerical simulations in QuTiP environment. Our results show that, for entanglement swapping, the proposed scheme improves the entanglement distribution rate by an average of 63% and by up to 159% compared with photonic-only architectures. Moreover, after purification, the end-to-end fidelities exceed 0.8 over distances up to 20 km.
Abstract We design a quantum repeater architecture, necessary for long distance quantum networks, using the recently proposed microwave cat state qubits, formed and manipulated via interaction between a superconducting nonlinear element and a microwave cavity. These qubits are especially attractive for repeaters because in addition to serving as excellent computational units with deterministic gate operations, they also have coherence times long enough to deal with the unavoidable propagation delays. Since microwave photons are too low in energy to be able to carry quantum information over long distances, as an intermediate step, we expand on a recently proposed microwave to optical transduction protocol using excited states of a rare-earth ion (Er 3+ ) doped crystal. To enhance the entanglement distribution rate, we propose to use spectral multiplexing by employing an array of cavities at each node. We compare our achievable rates with direct transmission and with two other promising repeater approaches, and show that ours could be higher in appropriate regimes, even in the presence of realistic imperfections and noise, while maintaining reasonably high fidelities of the final state. Thus, in the short term, our work could be directly useful for secure quantum communication, whereas in the long term, we can envision a large scale distributed quantum computing network built on our architecture.
We propose a repeat-until-success protocol to improve the performance of probabilistic quantum repeaters. Conventionally, these rely on passive static linear-optics elements and photodetectors to perform Bell-state measurements (BSMs) with a maximum success rate of 50%. This is a strong impediment for entanglement swapping between distant quantum memories. Every time a BSM fails, entanglement needs to be redistributed between the corresponding memories in the repeater link. The key ingredients of our scheme are repeatable BSMs. Under ideal conditions, these turn probabilistic quantum repeaters into deterministic ones. Under realistic conditions, our protocol too might fail. However, using additional threshold detectors now allows us to improve the entanglement generation rate by almost orders of magnitude, at a nominal distance of 1000 km, compared to schemes that rely on conventional BSMs. This improvement is sufficient to make the performance of our scheme comparable to the expected performance of some deterministic quantum repeaters.
Long-distance quantum communication faces significant challenges due to photon loss and operational errors in fiber optic channels. Quantum repeaters (QRs) offer a promising solution by extending the communication range and enabling secure exchange of quantum information over continental distances. This article provides an overview of the three generations of QRs, comparing their technological requirements and challenges. We introduce the basic techniques, such as entanglement swapping, distillation, and error correction, and discuss their relevance to each generation of QRs. In addition, we present a future direction that integrates superconducting qubits with optical fibers, enabled by recent advances in microwave-optical transduction. This new hybrid architecture offers promising prospects for scalable and efficient quantum networks. It is also applicable in quantum key distribution protocols, such as E91.
Long-distance entanglement distribution will require error correction/distillation in order to compensate for the loss of coherence in quantum memories and noise addition during entanglement swapping. In this paper, we argue why repeaters with error correction abilities should utilize more than one physical platform. Hybrid repeaters introduced in this work, utilize the best features of different platforms, such as high entanglement generation rates of one type and the low two-qubit gate errors and high coherence times offered by another type. At the same time, taking the resource-intensive nature of hybrid repeaters (financial or difficulty of deployment) into account, we propose a repeater chain where only some repeaters need to be hybrid, whereas the others can be simpler with no error correction abilities. We show through detailed simulations that these hybrid repeater architectures can outperform architectures that rely only on a single kind of quantum memory platform in terms of end-to-end fidelity and entanglement distribution rates/secret key rates. The advantage is greater in more resourceconstrained scenarios, making hybrid architectures relevant for current implementations.
We present a hybrid quantum repeater protocol for the long-distance distribution of atomic entangled states beyond qubits. In our scheme, imperfect noisy entangled pairs of two qudits, i.e., two discrete-variable d-level systems, each of, in principle, arbitrary dimension d, are initially shared between the intermediate stations of the channel. This is achieved via local, sufficiently strong light-matter interactions, involving optical coherent states and their transmission after these interactions, and optical measurements on the transmitted field modes, especially efficient continuous-variable homodyne detections (``hybrid'' here refers to the simultaneous exploitation of discrete- and continuous-variable degrees of freedom for the local processing and storage of entangled states as well as their nonlocal distribution, respectively) and unambiguous state discrimination. For qutrits we quantify the light-matter entanglement that can be effectively shared through an elementary lossy channel, and for a repeater spacing of up to 10 km we show that the realistic (lossy) qutrit entanglement is even larger than any ideal (loss-free) qubit entanglement. After including qudit entanglement purification and swapping procedures, we calculate the long-distance entangled-pair distribution rates and the final entangled-state fidelities for total communication distances of up to 1280 km. For example, employing unambiguous state discrimination, with three rounds of purification, entangled qudit pairs of near-unit fidelity can be distributed over 1280 km at an ideal maximal rate (assuming perfect gate operations) on the order of 100 Hz.