Abstract We present Rephon-augmented quantum circuit post-processing, a framework in which the output of a noisy quantum circuit is improved by a single operation from the Rephon Computing gate set — the amplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the method on the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on two independent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix) — under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a Bhattacharyya Coefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD drops to 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTron simulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution using a threshold equal to the mean probability, concentrating all probability mass onto the correct quantum state. We show that this approach is simulator-agnostic — the same post-processing operation, applied to output from any quantum simulator or quantum hardware device, yields the same quality improvement. The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation, and no hardware modification. These results establish Rephon Computing as a viable co-processor architecture for Noisy Intermediate-Scale Quantum (NISQ) devices
Abstract We present Rephon-augmented quantum circuit post-processing, a framework in which the output of a noisy quantum circuit is improved by a single operation from the Rephon Computing gate set — the amplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the method on the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on two independent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix) — under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a Bhattacharyya Coefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD drops to 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTron simulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution using a threshold equal to the mean probability, concentrating all probability mass onto the correct quantum state. We show that this approach is simulator-agnostic — the same post-processing operation, applied to output from any quantum simulator or quantum hardware device, yields the same quality improvement. The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation, and no hardware modification. These results establish Rephon Computing as a viable co-processor architecture for Noisy Intermediate-Scale Quantum (NISQ) devices
We present Rephon-augmented quantum circuit post-processing, a framework in which the output of anoisy quantum circuit is improved by a single operation from the Rephon Computing gate set — theamplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the methodon the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on twoindependent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix)— under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a BhattacharyyaCoefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD dropsto 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTronsimulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution usinga threshold equal to the mean probability, concentrating all probability mass onto the correct quantumstate. We show that this approach is simulator-agnostic — the same post-processing operation, applied tooutput from any quantum simulator or quantum hardware device, yields the same quality improvement.The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation,and no hardware modification. These results establish Rephon Computing as a viable co-processorarchitecture for Noisy Intermediate-Scale Quantum (NISQ) devices.
Quantum Amplitude Estimation (QAE) is a key primitive in quantum computing, but its standard implementation using Quantum Phase Estimation is resource-intensive, requiring a large number of coherent qubits in a single circuit block to achieve high precision. This presents a significant challenge for near-term Noisy Intermediate-Scale Quantum (NISQ) devices. To address this, we introduce the Adaptive Windowed Quantum Amplitude Estimation (AWQAE) framework, a modular, scalable and adaptive approach that decouples estimation precision from the number of physical qubits required in a single circuit. AWQAE operates by iteratively estimating the phase bits in small, fixed-size chunks, using a number of smaller, independent quantum circuits, which are amenable to parallel processing. A key technical contribution of this work is introduction of a phase resolution circuit and an ancilla-guided mechanism that enables accurate chunk assignment and eigenphase reconstruction in the presence of multiple eigenstates. This design is inherently NISQ-friendly, by lowering circuit depth and qubit count per block to reduce decoherence and noise effects. A key component of our approach is a robust classical post-processing algorithm that resolves measurement ambiguities that arise during the iterative process. This post-processing routine uses a least-significant-bit (LSB)-to-most-significant-bit (MSB) correction to reconstruct the full, high-precision phase estimate, ensuring accuracy. By combining a modular quantum-classical loop with an ambiguity-aware reconstruction method, AWQAE offers a powerful and flexible solution for performing high-precision QAE on resource-constrained quantum hardware. Our approach demonstrates enhanced scalability, and adaptability, making it a promising candidate for practical applications of QAE in the NISQ era.
Quantum phase estimation (QPE) is the workhorse behind any quantum algorithm and a promising method for determining ground state energies of strongly correlated quantum systems. Low-cost QPE techniques make use of circuits which only use a single ancilla qubit, requiring classical post-processing to extract eigenvalue details of the system. We investigate choices for phase estimation for a unitary matrix with low-depth noise-free or noisy circuits, varying both the phase estimation circuits themselves as well as the classical post-processing to determine the eigenvalue phases. We work in the scenario when the input state is not an eigenstate of the unitary matrix. We develop a new post-processing technique to extract eigenvalues from phase estimation data based on a classical time-series (or frequency) analysis and contrast this to an analysis via Bayesian methods. We calculate the variance in estimating single eigenvalues via the time-series analysis analytically, finding that it scales to first order in the number of experiments performed, and to first or second order (depending on the experiment design) in the circuit depth. Numerical simulations confirm this scaling for both estimators. We attempt to compensate for the noise with both classical post-processing techniques, finding good results in the presence of depolarizing noise, but smaller improvements in 9-qubit circuit-level simulations of superconducting qubits aimed at resolving the electronic ground state of a H 4 -molecule.
Quantum computing has the potential to solve problems that are currently intractable to classical computers with algorithms like Quantum Phase Estimation (QPE); however, noise significantly hinders the performance of today’s quantum computers. Machine learning has the potential to improve the performance of QPE algorithms, especially in the presence of noise. In this work, QPE circuits were simulated with varying levels of depolarizing noise to generate datasets of QPE output. In each case, the phase being estimated was generated with a phase gate, and each circuit modeled was defined by a randomly selected phase. The model accuracy, prediction speed, overfitting level and variation in accuracy with noise level was determined for 5 machine learning algorithms. These attributes were compared to the traditional method of post-processing and a 6x–36 improvement in model performance was noted, depending on the dataset. No algorithm was a clear winner when considering these 4 criteria, as the lowest-error model (neural network) was also the slowest predictor; the algorithm with the lowest overfitting and fastest prediction time (linear regression) had the highest error level and a high degree of variation of error with noise. The XGBoost ensemble algorithm was judged to be the best tradeoff between these criteria due to its error level, prediction time and low variation of error with noise. For the first time, a machine learning model was validated using a 2-qubit datapoint obtained from an IBMQ quantum computer. The best 2-qubit model predicted within 2% of the actual phase, while the traditional method possessed a 25% error.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.