Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Noise Mitigation in Quantum Phase Estimation via the Rephon A Gate

Zuhair Ahmed

Published Jun 16, 2026• 0 citations
Publisher

Abstract

We present Rephon-augmented quantum circuit post-processing, a framework in which the output of anoisy quantum circuit is improved by a single operation from the Rephon Computing gate set — theamplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the methodon the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on twoindependent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix)— under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a BhattacharyyaCoefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD dropsto 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTronsimulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution usinga threshold equal to the mean probability, concentrating all probability mass onto the correct quantumstate. We show that this approach is simulator-agnostic — the same post-processing operation, applied tooutput from any quantum simulator or quantum hardware device, yields the same quality improvement.The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation,and no hardware modification. These results establish Rephon Computing as a viable co-processorarchitecture for Noisy Intermediate-Scale Quantum (NISQ) devices.

DOI
10.5281/zenodo.20723287

Related papers

Rephon-Augmented Quantum Circuit Post-Processing: Noise Mitigation in Quantum Phase Estimation via the Rephon A Gate

Zuhair Ahmed

Abstract We present Rephon-augmented quantum circuit post-processing, a framework in which the output of a noisy quantum circuit is improved by a single operation from the Rephon Computing gate set — the amplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the method on the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on two independent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix) — under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a Bhattacharyya Coefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD drops to 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTron simulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution using a threshold equal to the mean probability, concentrating all probability mass onto the correct quantum state. We show that this approach is simulator-agnostic — the same post-processing operation, applied to output from any quantum simulator or quantum hardware device, yields the same quality improvement. The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation, and no hardware modification. These results establish Rephon Computing as a viable co-processor architecture for Noisy Intermediate-Scale Quantum (NISQ) devices

•Jun 18, 2026•0 citations

Modular Quantum Amplitude Estimation: A Scalable and Adaptive Framework

Alok Shukla, Prakash Vedula

Quantum Amplitude Estimation (QAE) is a key primitive in quantum computing, but its standard implementation using Quantum Phase Estimation is resource-intensive, requiring a large number of coherent qubits in a single circuit block to achieve high precision. This presents a significant challenge for near-term Noisy Intermediate-Scale Quantum (NISQ) devices. To address this, we introduce the Adaptive Windowed Quantum Amplitude Estimation (AWQAE) framework, a modular, scalable and adaptive approach that decouples estimation precision from the number of physical qubits required in a single circuit. AWQAE operates by iteratively estimating the phase bits in small, fixed-size chunks, using a number of smaller, independent quantum circuits, which are amenable to parallel processing. A key technical contribution of this work is introduction of a phase resolution circuit and an ancilla-guided mechanism that enables accurate chunk assignment and eigenphase reconstruction in the presence of multiple eigenstates. This design is inherently NISQ-friendly, by lowering circuit depth and qubit count per block to reduce decoherence and noise effects. A key component of our approach is a robust classical post-processing algorithm that resolves measurement ambiguities that arise during the iterative process. This post-processing routine uses a least-significant-bit (LSB)-to-most-significant-bit (MSB) correction to reconstruct the full, high-precision phase estimate, ensuring accuracy. By combining a modular quantum-classical loop with an ambiguity-aware reconstruction method, AWQAE offers a powerful and flexible solution for performing high-precision QAE on resource-constrained quantum hardware. Our approach demonstrates enhanced scalability, and adaptability, making it a promising candidate for practical applications of QAE in the NISQ era.

arXiv:2508.05805•Aug 7, 2025•3 citations

Mitigating Realistic Noise in Practical Noisy Intermediate-Scale Quantum Devices

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda +3 more

Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.

arXiv:2001.04891•Physical Review Applied•Mar 9, 2021•116 citations

Quantum phase estimation of multiple eigenvalues for small-scale (noisy) experiments

Thomas E. O’Brien, Brian Tarasinski, Barbara M. Terhal

Quantum phase estimation (QPE) is the workhorse behind any quantum algorithm and a promising method for determining ground state energies of strongly correlated quantum systems. Low-cost QPE techniques make use of circuits which only use a single ancilla qubit, requiring classical post-processing to extract eigenvalue details of the system. We investigate choices for phase estimation for a unitary matrix with low-depth noise-free or noisy circuits, varying both the phase estimation circuits themselves as well as the classical post-processing to determine the eigenvalue phases. We work in the scenario when the input state is not an eigenstate of the unitary matrix. We develop a new post-processing technique to extract eigenvalues from phase estimation data based on a classical time-series (or frequency) analysis and contrast this to an analysis via Bayesian methods. We calculate the variance in estimating single eigenvalues via the time-series analysis analytically, finding that it scales to first order in the number of experiments performed, and to first or second order (depending on the experiment design) in the circuit depth. Numerical simulations confirm this scaling for both estimators. We attempt to compensate for the noise with both classical post-processing techniques, finding good results in the presence of depolarizing noise, but smaller improvements in 9-qubit circuit-level simulations of superconducting qubits aimed at resolving the electronic ground state of a H 4 -molecule.

arXiv:1809.09697•New Journal of Physics•Jan 2, 2019•189 citations

Phase estimation of local Hamiltonians on NISQ hardware

Laura Clinton, Johannes Bausch, Joel Klassen +1 more

Abstract In this work we investigate a binned version of quantum phase estimation (QPE) set out by Somma (2019 New J. Phys. 21 123025) and known as the quantum eigenvalue estimation problem (QEEP). Specifically, we determine whether the circuit decomposition techniques we set out in previous work, Clinton et al (2021 Nat. Commun. 12 1–10), can improve the performance of QEEP in the noisy intermediate scale quantum (NISQ) regime. To this end we adopt a physically motivated abstraction of NISQ device capabilities as in Clinton et al (2021 Nat. Commun. 12 1–10). Within this framework, we find that our techniques reduce the threshold at which it becomes possible to perform the minimum two-bin instance of this algorithm by an order of magnitude. This is for the specific example of a two dimensional spin Fermi-Hubbard model. For example, we estimate that the depolarizing single qubit error rate required to implement a minimum two bin example of QEEP—with a 5 × 5 Fermi-Hubbard model and up to a precision of 10 % —can be reduced from 10−7 to 10−5. We explore possible modifications to this protocol and propose an application, which we dub randomized quantum eigenvalue estimation problem (rQEEP). rQEEP outputs estimates on the fraction of eigenvalues which lie within randomly chosen bins and upper bounds the total deviation of these estimates from the true values. One use case we envision for this algorithm is resolving density of states features of local Hamiltonians.

arXiv:2110.13584•New Journal of Physics•Mar 1, 2023•14 citations

Improving 2–5 Qubit Quantum Phase Estimation Circuits Using Machine Learning

Charles Woodrum, Torrey J. Wagner, David E. Weeks

Quantum computing has the potential to solve problems that are currently intractable to classical computers with algorithms like Quantum Phase Estimation (QPE); however, noise significantly hinders the performance of today’s quantum computers. Machine learning has the potential to improve the performance of QPE algorithms, especially in the presence of noise. In this work, QPE circuits were simulated with varying levels of depolarizing noise to generate datasets of QPE output. In each case, the phase being estimated was generated with a phase gate, and each circuit modeled was defined by a randomly selected phase. The model accuracy, prediction speed, overfitting level and variation in accuracy with noise level was determined for 5 machine learning algorithms. These attributes were compared to the traditional method of post-processing and a 6x–36 improvement in model performance was noted, depending on the dataset. No algorithm was a clear winner when considering these 4 criteria, as the lowest-error model (neural network) was also the slowest predictor; the algorithm with the lowest overfitting and fastest prediction time (linear regression) had the highest error level and a high degree of variation of error with noise. The XGBoost ensemble algorithm was judged to be the best tradeoff between these criteria due to its error level, prediction time and low variation of error with noise. For the first time, a machine learning model was validated using a 2-qubit datapoint obtained from an IBMQ quantum computer. The best 2-qubit model predicted within 2% of the actual phase, while the traditional method possessed a 25% error.

Algorithms•May 15, 2024•2 citations
We present Rephon-augmented quantum circuit post-processing, a framework in which the output of anoisy quantum circuit is improved by a single operation from the Rephon Computing gate set — theamplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the methodon the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on twoindependent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix)— under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a BhattacharyyaCoefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD dropsto 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTronsimulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution usinga threshold equal to the mean probability, concentrating all probability mass onto the correct quantumstate. We show that this approach is simulator-agnostic — the same post-processing operation, applied tooutput from any quantum simulator or quantum hardware device, yields the same quality improvement.The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation,and no hardware modification. These results establish Rephon Computing as a viable co-processorarchitecture for Noisy Intermediate-Scale Quantum (NISQ) devices.
Abstract We present Rephon-augmented quantum circuit post-processing, a framework in which the output of a noisy quantum circuit is improved by a single operation from the Rephon Computing gate set — the amplitude-shaping A gate — implemented in one physical rephon pulse cycle. We demonstrate the method on the canonical Quantum Phase Estimation (QPE) algorithm for an eigenphase φ = 3/8, executed on two independent quantum simulators — Qiskit Aer (shot-based probabilistic) and PKTron (exact density matrix) — under identical depolarizing noise (2% single-qubit, 4% two-qubit gate error). Before Rephon postprocessing, the Qiskit simulation yields a Total Variation Distance (TVD) of 0.4782 and a Bhattacharyya Coefficient (BC) of 0.7223 from the ideal distribution. After a single Rephon A gate operation, the TVD drops to 0.0000 and the BC rises to 1.0000. Identical 100% TVD improvement is obtained from the PKTron simulation. The Rephon A gate identifies and suppresses the noise floor of the probability distribution using a threshold equal to the mean probability, concentrating all probability mass onto the correct quantum state. We show that this approach is simulator-agnostic — the same post-processing operation, applied to output from any quantum simulator or quantum hardware device, yields the same quality improvement. The method requires no additional qubits, no repeated circuit executions, no classical iterative optimisation, and no hardware modification. These results establish Rephon Computing as a viable co-processor architecture for Noisy Intermediate-Scale Quantum (NISQ) devices
Quantum Amplitude Estimation (QAE) is a key primitive in quantum computing, but its standard implementation using Quantum Phase Estimation is resource-intensive, requiring a large number of coherent qubits in a single circuit block to achieve high precision. This presents a significant challenge for near-term Noisy Intermediate-Scale Quantum (NISQ) devices. To address this, we introduce the Adaptive Windowed Quantum Amplitude Estimation (AWQAE) framework, a modular, scalable and adaptive approach that decouples estimation precision from the number of physical qubits required in a single circuit. AWQAE operates by iteratively estimating the phase bits in small, fixed-size chunks, using a number of smaller, independent quantum circuits, which are amenable to parallel processing. A key technical contribution of this work is introduction of a phase resolution circuit and an ancilla-guided mechanism that enables accurate chunk assignment and eigenphase reconstruction in the presence of multiple eigenstates. This design is inherently NISQ-friendly, by lowering circuit depth and qubit count per block to reduce decoherence and noise effects. A key component of our approach is a robust classical post-processing algorithm that resolves measurement ambiguities that arise during the iterative process. This post-processing routine uses a least-significant-bit (LSB)-to-most-significant-bit (MSB) correction to reconstruct the full, high-precision phase estimate, ensuring accuracy. By combining a modular quantum-classical loop with an ambiguity-aware reconstruction method, AWQAE offers a powerful and flexible solution for performing high-precision QAE on resource-constrained quantum hardware. Our approach demonstrates enhanced scalability, and adaptability, making it a promising candidate for practical applications of QAE in the NISQ era.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
Quantum phase estimation (QPE) is the workhorse behind any quantum algorithm and a promising method for determining ground state energies of strongly correlated quantum systems. Low-cost QPE techniques make use of circuits which only use a single ancilla qubit, requiring classical post-processing to extract eigenvalue details of the system. We investigate choices for phase estimation for a unitary matrix with low-depth noise-free or noisy circuits, varying both the phase estimation circuits themselves as well as the classical post-processing to determine the eigenvalue phases. We work in the scenario when the input state is not an eigenstate of the unitary matrix. We develop a new post-processing technique to extract eigenvalues from phase estimation data based on a classical time-series (or frequency) analysis and contrast this to an analysis via Bayesian methods. We calculate the variance in estimating single eigenvalues via the time-series analysis analytically, finding that it scales to first order in the number of experiments performed, and to first or second order (depending on the experiment design) in the circuit depth. Numerical simulations confirm this scaling for both estimators. We attempt to compensate for the noise with both classical post-processing techniques, finding good results in the presence of depolarizing noise, but smaller improvements in 9-qubit circuit-level simulations of superconducting qubits aimed at resolving the electronic ground state of a H 4 -molecule.
Abstract In this work we investigate a binned version of quantum phase estimation (QPE) set out by Somma (2019 New J. Phys. 21 123025) and known as the quantum eigenvalue estimation problem (QEEP). Specifically, we determine whether the circuit decomposition techniques we set out in previous work, Clinton et al (2021 Nat. Commun. 12 1–10), can improve the performance of QEEP in the noisy intermediate scale quantum (NISQ) regime. To this end we adopt a physically motivated abstraction of NISQ device capabilities as in Clinton et al (2021 Nat. Commun. 12 1–10). Within this framework, we find that our techniques reduce the threshold at which it becomes possible to perform the minimum two-bin instance of this algorithm by an order of magnitude. This is for the specific example of a two dimensional spin Fermi-Hubbard model. For example, we estimate that the depolarizing single qubit error rate required to implement a minimum two bin example of QEEP—with a 5 × 5 Fermi-Hubbard model and up to a precision of 10 % —can be reduced from 10−7 to 10−5. We explore possible modifications to this protocol and propose an application, which we dub randomized quantum eigenvalue estimation problem (rQEEP). rQEEP outputs estimates on the fraction of eigenvalues which lie within randomly chosen bins and upper bounds the total deviation of these estimates from the true values. One use case we envision for this algorithm is resolving density of states features of local Hamiltonians.
Quantum computing has the potential to solve problems that are currently intractable to classical computers with algorithms like Quantum Phase Estimation (QPE); however, noise significantly hinders the performance of today’s quantum computers. Machine learning has the potential to improve the performance of QPE algorithms, especially in the presence of noise. In this work, QPE circuits were simulated with varying levels of depolarizing noise to generate datasets of QPE output. In each case, the phase being estimated was generated with a phase gate, and each circuit modeled was defined by a randomly selected phase. The model accuracy, prediction speed, overfitting level and variation in accuracy with noise level was determined for 5 machine learning algorithms. These attributes were compared to the traditional method of post-processing and a 6x–36 improvement in model performance was noted, depending on the dataset. No algorithm was a clear winner when considering these 4 criteria, as the lowest-error model (neural network) was also the slowest predictor; the algorithm with the lowest overfitting and fastest prediction time (linear regression) had the highest error level and a high degree of variation of error with noise. The XGBoost ensemble algorithm was judged to be the best tradeoff between these criteria due to its error level, prediction time and low variation of error with noise. For the first time, a machine learning model was validated using a 2-qubit datapoint obtained from an IBMQ quantum computer. The best 2-qubit model predicted within 2% of the actual phase, while the traditional method possessed a 25% error.