Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Resonator-Assisted Active Phonon Extraction Architecture for Trapped-Ion Quantum Processors

Francis Procaccia

Published May 1, 2026• 0 citations
Publisher

Abstract

We introduce a six-layer monolithic chip architecture that integrates classical driven resonator-assisted sideband cooling into trapped-ion quantum processors. A high-Q superconducting LC resonator (Nb/NbTi, Q_int ≳ 10⁵) acts as a narrowband, low-noise delivery circuit for a classical RF tone at the red motional sideband. Dedicated inner coupling electrodes enable conservative red-sideband Rabi frequencies of 50–200 kHz for typical RF amplitudes (50–100 V). Time-domain master-equation simulations show that this approach extracts phonons from realistic initial occupations (¯n ≈ 5) down to ¯n = 0.0008 within 200 µs, achieving a net cooling rate of ~25 000 phonons/s even in the presence of 50 phonons/s anomalous heating. A corrected Johnson–Nyquist noise budget demonstrates that internal quality factors Q_int ≳ 10⁴ keep added heating below 0.1 phonons/s. The resonator operates in pulsed or between-gate mode to maintain compatibility with high-fidelity gate execution. The design provides continuous (or near-continuous) phonon management without optical recooling, enabling improved gate fidelities (>99.99%) and scalable modular QCCD processors connected via photonic links. Full Python scripts for 3D electrostatic simulations and time-domain dynamics are included. Keywords: trapped ions, phonon cooling, sideband cooling, quantum computing, superconducting resonator, QCCD, motional heating

DOI
10.5281/zenodo.19937223

Related papers

Superconducting surface trap chips for microwave-driven trapped ions

Yuta Tsuchimoto, Ippei Nakamura, Shotaro Shirai +1 more

Microwave-driven trapped ion logic gates offer a promising avenue for advancing beyond laser-based logic operations. In future microwave-based operations, however, the joule heat produced by large microwave currents flowing through narrow microwave electrodes would potentially hinder improvements in gate speed and fidelity. Moreover, scalability, particularly in cryogenic trapped ion systems, is impeded by the excessive joule heat. To address these challenges, we present a novel approach: superconducting surface trap chips that integrate high- Q microwave resonators with large current capacities. Utilizing sub-ampere microwave currents in superconducting Nb resonators, we generate substantial magnetic field gradients with significantly reduced losses compared to conventional metal chips. By harnessing the high Q factors of superconducting resonators, we propose a power-efficient two-qubit gate scheme capable of achieving a sub-milliwatt external microwave input power at a gate Rabi frequency of 1 kHz.

arXiv:2407.11443•EPJ Quantum Technology•Sep 9, 2024•5 citations

Ultra-low vibration closed-cycle cryogenic surface-electrode ion trap apparatus

T. Dubielzig

Trapped ions are one of the leading platforms for building scalable quantum information processors. Current ion traps run on less than 100 qubits. A useful quantum computer needs to operate thousands or even millions of qubits. If systems reach gate fidelities that allow for quantum error correction, gate errors below the physical fidelity can be reached, which is important for scaling. The most promising platform for scaling up ion-based quantum computers are surface electrode traps in connection with the so-called QCCD (Quantum Charge Coupled Device) architecture. In an evolution of the standard (laser-based) approach to quantum logic gates, gates can be performed by applying an oscillating magnetic near-field gradient to the ions. Current fidelities are about one order of magnitude away from reaching the fault tolerant threshold with no fundamental limitations in sight. Scaling QCCDs is impeded by heating rates of the ions as well as vacuum quality. Ions have to be stored for at least as long as it takes for an algorithm to run and subsequent readout. Collisions with background gas and heating can expel ions from the trap. The microwave near-field approach of driving gates benefits from ions that are trapped close to the trap surface. Unfortunately, heating becomes more prominent near the surface. A cryogenic environment reduces the background pressure by several orders of magnitude and the kinetic energy of gas molecules by two orders of magnitude. Heating rates in a cryogenic trap are about two orders of magnitude lower than in a room temperature trap with otherwise equal physical properties. To operate a QCCD processor, it is required to employ phase-stable Raman laser beams. The cryogenic design of the apparatus needs to take into account the resulting requirements for ultra-low vibration amplitudes. This is particularly relevant for closed-cycle cooling systems, which are desirable from an economic point of view compared to liquid cryostats that boil off helium, but which also feature moving mechanical parts that can introduce a serious amount of vibrations. Here, we present a vibration isolated closed cycle Gifford-McMahon cryocooler with record low vibration amplitudes of 29 nm (RMS=7.8 nm) in the vertical and 51 nm (RMS=13.5 nm) in the horizontal direction. It contains a self-sustained inner vacuum chamber that houses the trap. It features 100 DC connections, 10 of which are able to carry up to 1 A of current and 8 high frequency lines. At 5 K, we can apply continuous 3.4 W of microwave power continuously at 1 GHz to the trap electrodes without heating the system. This is about 5.8 times more than state of the art near-field gates require. We also present the laser systems required to for single-shot ablation loading and Doppler cooling of Be ions: a 70 mW 313 nm Dopper cooling laser, a 1064 nm ns-pulse laser for ablation of neutral beryllium atoms and a 235 nm laser for ionizing them. The detection system features an in vacuum imaging system on a cryogenic 3D translation stage that is able to scan and image the complete surface of an ion trap. The light can be detected on a photomultiplier tube or spatially resolved on an EMCCD camera. Our trap features a meander structure for driving gates and can trap up to 5 ions of which we, so far, did not lose any due to background gas collisions. This hints at a vacuum pressure of 1e-12 mbar or lower. The demonstrated system could hold a cryogenic QCCD chip with a few 10 qubits

•Jan 1, 2021•26 citations

How to couple trapped ions to superconducting resonators: towards hybrid quantum devices

Sönke Möller

In this dissertation, we present work on a quantum hybrid device comprising of a trapped calcium atom and a superconducting LC resonator. This hybrid device is a first step towards building a hybrid quantum computer that can take advantage of the different properties of atomic and superconducting quantum systems and combine the best characteristics of both. We model a trapped ion as an LC circuit and calculate its coupling to a mode of an LC resonator. Further, we optimize the trap geometry and placement of coupling electrodes to increase the coupling. We also outline the manufacturing process and simulation of the trapping potentials for the surface traps used in this work. Finally, we report on initial experiments coupling a trapped ion to a resonant mode of the LC resonator, increasing the heating rate to 220 phonons/ms on resonance versus 0.5 phonons/ms without additional heating from the resonator. The ratio of the heating rates for the two secular frequencies of the ion confrm our simulated coupling rates.

•Jan 1, 2016•1 citation

Fast continuous ion transport through X-junctions with low motional excitation for QCCD architectures

Jie Xiao, Zhao Wang, Chenghong Zhu +4 more

Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single $^{171}Yb^+$ ion through a 90° turn in $5μs$ at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about $30\%$ across various circuit types. The fraction of execution time spent on transport decreases from approximately $70\%$ to $55\%$. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.

quant-pharXiv:2610.14472•Oct 13, 2026•0 citations

Superconducting NbTi Radiofrequency Resonator for Surface ion Traps

M. Schubert, D. Fegelein, Dominik Hanisch +3 more

Trapped-ion qubits are one approach among many for achieving scalable quantum computers. An ion trap has to be operated with several dc and radio frequency (rf) signals to trap and control its qubits. Many ion trap setups are operated at cryogenic temperatures to reduce thermal influences, to reach very high vacuum, and to achieve high fidelity for quantum operations. A resonance circuit, consisting of a coil and the capacitance of the trap electrodes, is used to step-up a low power rf signal to high amplitudes in close proximity to the ion trap. These ac fields are used to confine ions$70 \,{\rm \mu }\mathrm{m}$above a surface ion trap chip. An increased quality factor (Q-factor) of the resonance circuit leads to a higher voltage gain, but the experiment also benefits from a better attenuation of parasitic frequency components in the confining electric field. The Q-factor is inversely proportional to the trap capacitance. Since ion traps are growing in size due to a larger number of qubits, the capacitance is increasing. Therefore, the development of a coil with low losses becomes even more important. In this work, we present the setup of a superconducting coil for a high-Q resonator, measurements of the Q-factor, and its temperature dependency. The coil is made of a niobium-titanium (NbTi) wire wound on a threaded bobbin made of ceramics and equipped with further thermalization structures. The superconducting resonator is a very promising approach to satisfy the needs for future trapped-ion quantum computing setups.

IEEE Transactions on Applied Superconductivity•Jan 8, 2024•0 citations

Rapid exchange cooling with trapped ions

Spencer D. Fallek, Vikram S. Sandhu, Ryan A. McGill +4 more

Abstract The trapped-ion quantum charge-coupled device (QCCD) architecture is a leading candidate for advanced quantum information processing. In current QCCD implementations, imperfect ion transport and anomalous heating can excite ion motion during a calculation. To counteract this, intermediate cooling is necessary to maintain high-fidelity gate performance. Cooling the computational ions sympathetically with ions of another species, a commonly employed strategy, creates a significant runtime bottleneck. Here, we demonstrate a different approach we call exchange cooling. Unlike sympathetic cooling, exchange cooling does not require trapping two different atomic species. The protocol introduces a bank of “coolant" ions which are repeatedly laser cooled. A computational ion can then be cooled by transporting a coolant ion into its proximity. We test this concept experimentally with two 40Ca+ ions, executing the necessary transport in 107 μs, an order of magnitude faster than typical sympathetic cooling durations. We remove over 96%, and as many as 102(5) quanta, of axial motional energy from the computational ion. We verify that re-cooling the coolant ion does not decohere the computational ion. This approach validates the feasibility of a single-species QCCD processor, capable of fast quantum simulation and computation.

arXiv:2309.02581•Nature Communications•Feb 5, 2024•16 citations
We introduce a six-layer monolithic chip architecture that integrates classical driven resonator-assisted sideband cooling into trapped-ion quantum processors. A high-Q superconducting LC resonator (Nb/NbTi, Q_int ≳ 10⁵) acts as a narrowband, low-noise delivery circuit for a classical RF tone at the red motional sideband. Dedicated inner coupling electrodes enable conservative red-sideband Rabi frequencies of 50–200 kHz for typical RF amplitudes (50–100 V). Time-domain master-equation simulations show that this approach extracts phonons from realistic initial occupations (¯n ≈ 5) down to ¯n = 0.0008 within 200 µs, achieving a net cooling rate of ~25 000 phonons/s even in the presence of 50 phonons/s anomalous heating. A corrected Johnson–Nyquist noise budget demonstrates that internal quality factors Q_int ≳ 10⁴ keep added heating below 0.1 phonons/s. The resonator operates in pulsed or between-gate mode to maintain compatibility with high-fidelity gate execution. The design provides continuous (or near-continuous) phonon management without optical recooling, enabling improved gate fidelities (>99.99%) and scalable modular QCCD processors connected via photonic links. Full Python scripts for 3D electrostatic simulations and time-domain dynamics are included. Keywords: trapped ions, phonon cooling, sideband cooling, quantum computing, superconducting resonator, QCCD, motional heating
Microwave-driven trapped ion logic gates offer a promising avenue for advancing beyond laser-based logic operations. In future microwave-based operations, however, the joule heat produced by large microwave currents flowing through narrow microwave electrodes would potentially hinder improvements in gate speed and fidelity. Moreover, scalability, particularly in cryogenic trapped ion systems, is impeded by the excessive joule heat. To address these challenges, we present a novel approach: superconducting surface trap chips that integrate high- Q microwave resonators with large current capacities. Utilizing sub-ampere microwave currents in superconducting Nb resonators, we generate substantial magnetic field gradients with significantly reduced losses compared to conventional metal chips. By harnessing the high Q factors of superconducting resonators, we propose a power-efficient two-qubit gate scheme capable of achieving a sub-milliwatt external microwave input power at a gate Rabi frequency of 1 kHz.
Trapped ions are one of the leading platforms for building scalable quantum information processors. Current ion traps run on less than 100 qubits. A useful quantum computer needs to operate thousands or even millions of qubits. If systems reach gate fidelities that allow for quantum error correction, gate errors below the physical fidelity can be reached, which is important for scaling. The most promising platform for scaling up ion-based quantum computers are surface electrode traps in connection with the so-called QCCD (Quantum Charge Coupled Device) architecture. In an evolution of the standard (laser-based) approach to quantum logic gates, gates can be performed by applying an oscillating magnetic near-field gradient to the ions. Current fidelities are about one order of magnitude away from reaching the fault tolerant threshold with no fundamental limitations in sight. Scaling QCCDs is impeded by heating rates of the ions as well as vacuum quality. Ions have to be stored for at least as long as it takes for an algorithm to run and subsequent readout. Collisions with background gas and heating can expel ions from the trap. The microwave near-field approach of driving gates benefits from ions that are trapped close to the trap surface. Unfortunately, heating becomes more prominent near the surface. A cryogenic environment reduces the background pressure by several orders of magnitude and the kinetic energy of gas molecules by two orders of magnitude. Heating rates in a cryogenic trap are about two orders of magnitude lower than in a room temperature trap with otherwise equal physical properties. To operate a QCCD processor, it is required to employ phase-stable Raman laser beams. The cryogenic design of the apparatus needs to take into account the resulting requirements for ultra-low vibration amplitudes. This is particularly relevant for closed-cycle cooling systems, which are desirable from an economic point of view compared to liquid cryostats that boil off helium, but which also feature moving mechanical parts that can introduce a serious amount of vibrations. Here, we present a vibration isolated closed cycle Gifford-McMahon cryocooler with record low vibration amplitudes of 29 nm (RMS=7.8 nm) in the vertical and 51 nm (RMS=13.5 nm) in the horizontal direction. It contains a self-sustained inner vacuum chamber that houses the trap. It features 100 DC connections, 10 of which are able to carry up to 1 A of current and 8 high frequency lines. At 5 K, we can apply continuous 3.4 W of microwave power continuously at 1 GHz to the trap electrodes without heating the system. This is about 5.8 times more than state of the art near-field gates require. We also present the laser systems required to for single-shot ablation loading and Doppler cooling of Be ions: a 70 mW 313 nm Dopper cooling laser, a 1064 nm ns-pulse laser for ablation of neutral beryllium atoms and a 235 nm laser for ionizing them. The detection system features an in vacuum imaging system on a cryogenic 3D translation stage that is able to scan and image the complete surface of an ion trap. The light can be detected on a photomultiplier tube or spatially resolved on an EMCCD camera. Our trap features a meander structure for driving gates and can trap up to 5 ions of which we, so far, did not lose any due to background gas collisions. This hints at a vacuum pressure of 1e-12 mbar or lower. The demonstrated system could hold a cryogenic QCCD chip with a few 10 qubits
In this dissertation, we present work on a quantum hybrid device comprising of a trapped calcium atom and a superconducting LC resonator. This hybrid device is a first step towards building a hybrid quantum computer that can take advantage of the different properties of atomic and superconducting quantum systems and combine the best characteristics of both. We model a trapped ion as an LC circuit and calculate its coupling to a mode of an LC resonator. Further, we optimize the trap geometry and placement of coupling electrodes to increase the coupling. We also outline the manufacturing process and simulation of the trapping potentials for the surface traps used in this work. Finally, we report on initial experiments coupling a trapped ion to a resonant mode of the LC resonator, increasing the heating rate to 220 phonons/ms on resonance versus 0.5 phonons/ms without additional heating from the resonator. The ratio of the heating rates for the two secular frequencies of the ion confrm our simulated coupling rates.
Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single 171Yb+^{171}Yb^+171Yb+ ion through a 90° turn in 5μs5μs5μs at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about 30%30\%30% across various circuit types. The fraction of execution time spent on transport decreases from approximately 70%70\%70% to 55%55\%55%. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.
Trapped-ion qubits are one approach among many for achieving scalable quantum computers. An ion trap has to be operated with several dc and radio frequency (rf) signals to trap and control its qubits. Many ion trap setups are operated at cryogenic temperatures to reduce thermal influences, to reach very high vacuum, and to achieve high fidelity for quantum operations. A resonance circuit, consisting of a coil and the capacitance of the trap electrodes, is used to step-up a low power rf signal to high amplitudes in close proximity to the ion trap. These ac fields are used to confine ions70 μm70 \,{\rm \mu }\mathrm{m}70μmabove a surface ion trap chip. An increased quality factor (Q-factor) of the resonance circuit leads to a higher voltage gain, but the experiment also benefits from a better attenuation of parasitic frequency components in the confining electric field. The Q-factor is inversely proportional to the trap capacitance. Since ion traps are growing in size due to a larger number of qubits, the capacitance is increasing. Therefore, the development of a coil with low losses becomes even more important. In this work, we present the setup of a superconducting coil for a high-Q resonator, measurements of the Q-factor, and its temperature dependency. The coil is made of a niobium-titanium (NbTi) wire wound on a threaded bobbin made of ceramics and equipped with further thermalization structures. The superconducting resonator is a very promising approach to satisfy the needs for future trapped-ion quantum computing setups.
Abstract The trapped-ion quantum charge-coupled device (QCCD) architecture is a leading candidate for advanced quantum information processing. In current QCCD implementations, imperfect ion transport and anomalous heating can excite ion motion during a calculation. To counteract this, intermediate cooling is necessary to maintain high-fidelity gate performance. Cooling the computational ions sympathetically with ions of another species, a commonly employed strategy, creates a significant runtime bottleneck. Here, we demonstrate a different approach we call exchange cooling. Unlike sympathetic cooling, exchange cooling does not require trapping two different atomic species. The protocol introduces a bank of “coolant" ions which are repeatedly laser cooled. A computational ion can then be cooled by transporting a coolant ion into its proximity. We test this concept experimentally with two 40Ca+ ions, executing the necessary transport in 107 μs, an order of magnitude faster than typical sympathetic cooling durations. We remove over 96%, and as many as 102(5) quanta, of axial motional energy from the computational ion. We verify that re-cooling the coolant ion does not decohere the computational ion. This approach validates the feasibility of a single-species QCCD processor, capable of fast quantum simulation and computation.