Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2309.02581 · Nature Communications

Rapid exchange cooling with trapped ions

Spencer D. Fallek, Vikram S. Sandhu, Ryan A. McGill, John M. Gray, Holly N. Tinkey, Craig R. Clark, Kenton R. Brown

Published Feb 5, 2024• 16 citations
arXivHTMLPDF

Abstract

Abstract The trapped-ion quantum charge-coupled device (QCCD) architecture is a leading candidate for advanced quantum information processing. In current QCCD implementations, imperfect ion transport and anomalous heating can excite ion motion during a calculation. To counteract this, intermediate cooling is necessary to maintain high-fidelity gate performance. Cooling the computational ions sympathetically with ions of another species, a commonly employed strategy, creates a significant runtime bottleneck. Here, we demonstrate a different approach we call exchange cooling. Unlike sympathetic cooling, exchange cooling does not require trapping two different atomic species. The protocol introduces a bank of “coolant" ions which are repeatedly laser cooled. A computational ion can then be cooled by transporting a coolant ion into its proximity. We test this concept experimentally with two 40Ca+ ions, executing the necessary transport in 107 μs, an order of magnitude faster than typical sympathetic cooling durations. We remove over 96%, and as many as 102(5) quanta, of axial motional energy from the computational ion. We verify that re-cooling the coolant ion does not decohere the computational ion. This approach validates the feasibility of a single-species QCCD processor, capable of fast quantum simulation and computation.

DOI
10.1038/s41467-024-45232-z

Related papers

Cooling Trapped Ions with Phonon Rapid Adiabatic Passage

Maya Fabrikant, P. Lauria, Ivaylo S. Madjarov +2 more

In recent demonstrations of the quantum charge-coupled device computer architecture, circuit times are dominated by cooling. Some motional modes of multi-ion crystals take orders of magnitude longer to cool than others because of low coolant ion participation. Here we demonstrate a new technique, that solves this issue by coherently exchanging the thermal populations of selected modes on timescales short compared to direct cooling. Using this method, which we call “phonon rapid adiabatic passage,” we can achieve subquanta temperatures from initial states with occupations as high as n ¯ ∼ 200 quanta. Analogous to adiabatic rapid passage, we quasistatically couple these slow-cooling modes with fast-cooling modes using dc electric fields. When the crystal is then adiabatically ramped through the resultant avoided crossing, nearly complete phonon population exchange results. We demonstrate this on two-ion crystals, and show the indirect ground-state cooling of all radial modes—achieving an order of magnitude speedup compared to direct cooling. We also show the technique’s insensitivity to trap potential and control field fluctuations, and find that it still achieves subquanta temperatures starting as high as n ¯ ∼ 200 . Published by the American Physical Society 2024

arXiv:2403.02315•Physical Review X•Nov 18, 2024•4 citations

Microwave-driven same-species sympathetic cooling for trapped ions

M. C. Smith, E. Vandrey, A. D. Leu +5 more

Sympathetic cooling of data qubits by coolant ions is an essential technique for trapped-ion quantum computing. Conventionally a second ion species is used, requiring additional lasers and complicating optical setups. We propose a scheme for sympathetic cooling using the same species and test it for $^{43}$Ca$^+$ ions. Pulsed sideband cooling and ion addressing are implemented via integrated microwave control, further simplifying optical requirements. We cool a two-ion gate mode close to its ground state ($\bar{n}\approx 0.16$) and benchmark an induced error on the data qubit of $1.7(4)\times 10^{-4}$ per cooling cycle.

quant-pharXiv:2607.20292•Jul 23, 2026•2 citations

Scalable quantum computing architecture with mixed species ion chains

John Wright, Carolyn Auchter, Chen-Kuan Chou +5 more

We describe our work on trapping, cooling and detecting mixed ion species for a scalable ion trap quantum information processing architecture. These mixed species chains in linear RF traps may help solve several problems with scaling ion trap quantum computation to large numbers of qubits. Initial temperature measurements of linear Coulomb crystals containing barium and ytterbium ions indicate that the mass difference does not significantly impede sympathetic cooling of normal modes that couple well to the coolant ions (Ba in our case). Average motional occupation numbers are estimated to be 10 to 20 quanta per mode for these well cooled modes for chains with small numbers of ions, consistent with the Doppler limit temperature. For normal modes that do not couple significantly to the coolant atoms, the occupation numbers are significantly higher, of order several thousand. Strategies for better cooling of these modes are discussed. Further, we are working to implement these techniques in microfabricated surface traps in order to exercise greater control over ion chain ordering and positioning.

arXiv:1410.0037•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 21, 2015•1 citation

Sympathetic Cooling in Trapped Ions with Spectral Selectivity via the Zeeman Shift

Kavyashree Ranawat, Jiyong Yu, Andrew Van Horn +3 more

High-fidelity quantum logic operations in trapped ions often require the ions' collective motion to be cooled to near the ground state. Since cooling the ions' motion typically involves dissipative processes such as spontaneous photon scattering, sympathetic cooling is used on select coolant ions between gate sequences to cool the ion chain without affecting the data qubits. Common implementations for coolant ions include different atomic species, different isotopes of the same species or individually addressable ions. Each of these approaches have challenges associated with them, which include increased hardware complexity, reduced efficiency of radial mode cooling and re-ordering events which add additional experimental overhead. We demonstrate a sympathetic cooling scheme leveraging internal metastable atomic levels accessible via a narrow quadrupole transition, utilizing the natural Zeeman shift and individually addressed Raman transitions, to achieve isolation of the non-coolant or ``data ions" from coolant ions. We demonstrate modest decoherence of the data ions due to cooling, while preserving the coherence requirements for high-fidelity gate operations.

quant-pharXiv:2605.27577•May 28, 2026•3 citations

Fast continuous ion transport through X-junctions with low motional excitation for QCCD architectures

Jie Xiao, Zhao Wang, Chenghong Zhu +4 more

Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single $^{171}Yb^+$ ion through a 90° turn in $5μs$ at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about $30\%$ across various circuit types. The fraction of execution time spent on transport decreases from approximately $70\%$ to $55\%$. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.

quant-pharXiv:2610.14472•Oct 13, 2026•0 citations

Ion-chain sympathetic cooling and gate dynamics

Aditya Paul, Crystal Noel

Sympathetic cooling is a technique often employed to mitigate motional heating in trapped-ion quantum computers. However, choosing system parameters such as number of coolants and cooling duty cycle for optimal gate performance requires evaluating trade-offs between motional errors and other slower errors such as qubit dephasing. The optimal parameters depend on cooling power, heating rate, and ion spacing in a particular system. In this study, we aim to analyze best practices for sympathetic cooling of long chains of trapped ions using analytical and computational methods. We use a case study to show that optimal cooling performance is achieved when coolants are placed at the center of the chain and provide a perturbative upper bound on the cooling limit of a mode given a particular set of cooling parameters. In addition, using computational tools, we analyze the trade-off between the number of coolant ions in a chain and the center-of-mass mode heating rate. We also show that cooling as often as possible when running a circuit is optimal when the qubit coherence time is otherwise long. These results provide a roadmap for how to choose sympathetic cooling parameters to maximize circuit performance in trapped-ion quantum computers using long chains of ions. Published by the American Physical Society 2024

arXiv:2405.13851•Physical Review Applied•Oct 15, 2024•6 citations
Abstract The trapped-ion quantum charge-coupled device (QCCD) architecture is a leading candidate for advanced quantum information processing. In current QCCD implementations, imperfect ion transport and anomalous heating can excite ion motion during a calculation. To counteract this, intermediate cooling is necessary to maintain high-fidelity gate performance. Cooling the computational ions sympathetically with ions of another species, a commonly employed strategy, creates a significant runtime bottleneck. Here, we demonstrate a different approach we call exchange cooling. Unlike sympathetic cooling, exchange cooling does not require trapping two different atomic species. The protocol introduces a bank of “coolant" ions which are repeatedly laser cooled. A computational ion can then be cooled by transporting a coolant ion into its proximity. We test this concept experimentally with two 40Ca+ ions, executing the necessary transport in 107 μs, an order of magnitude faster than typical sympathetic cooling durations. We remove over 96%, and as many as 102(5) quanta, of axial motional energy from the computational ion. We verify that re-cooling the coolant ion does not decohere the computational ion. This approach validates the feasibility of a single-species QCCD processor, capable of fast quantum simulation and computation.
In recent demonstrations of the quantum charge-coupled device computer architecture, circuit times are dominated by cooling. Some motional modes of multi-ion crystals take orders of magnitude longer to cool than others because of low coolant ion participation. Here we demonstrate a new technique, that solves this issue by coherently exchanging the thermal populations of selected modes on timescales short compared to direct cooling. Using this method, which we call “phonon rapid adiabatic passage,” we can achieve subquanta temperatures from initial states with occupations as high as n ¯ ∼ 200 quanta. Analogous to adiabatic rapid passage, we quasistatically couple these slow-cooling modes with fast-cooling modes using dc electric fields. When the crystal is then adiabatically ramped through the resultant avoided crossing, nearly complete phonon population exchange results. We demonstrate this on two-ion crystals, and show the indirect ground-state cooling of all radial modes—achieving an order of magnitude speedup compared to direct cooling. We also show the technique’s insensitivity to trap potential and control field fluctuations, and find that it still achieves subquanta temperatures starting as high as n ¯ ∼ 200 . Published by the American Physical Society 2024
Sympathetic cooling of data qubits by coolant ions is an essential technique for trapped-ion quantum computing. Conventionally a second ion species is used, requiring additional lasers and complicating optical setups. We propose a scheme for sympathetic cooling using the same species and test it for 43^{43}43Ca+^++ ions. Pulsed sideband cooling and ion addressing are implemented via integrated microwave control, further simplifying optical requirements. We cool a two-ion gate mode close to its ground state (nˉ≈0.16\bar{n}\approx 0.16nˉ≈0.16) and benchmark an induced error on the data qubit of 1.7(4)×10−41.7(4)\times 10^{-4}1.7(4)×10−4 per cooling cycle.
We describe our work on trapping, cooling and detecting mixed ion species for a scalable ion trap quantum information processing architecture. These mixed species chains in linear RF traps may help solve several problems with scaling ion trap quantum computation to large numbers of qubits. Initial temperature measurements of linear Coulomb crystals containing barium and ytterbium ions indicate that the mass difference does not significantly impede sympathetic cooling of normal modes that couple well to the coolant ions (Ba in our case). Average motional occupation numbers are estimated to be 10 to 20 quanta per mode for these well cooled modes for chains with small numbers of ions, consistent with the Doppler limit temperature. For normal modes that do not couple significantly to the coolant atoms, the occupation numbers are significantly higher, of order several thousand. Strategies for better cooling of these modes are discussed. Further, we are working to implement these techniques in microfabricated surface traps in order to exercise greater control over ion chain ordering and positioning.
High-fidelity quantum logic operations in trapped ions often require the ions' collective motion to be cooled to near the ground state. Since cooling the ions' motion typically involves dissipative processes such as spontaneous photon scattering, sympathetic cooling is used on select coolant ions between gate sequences to cool the ion chain without affecting the data qubits. Common implementations for coolant ions include different atomic species, different isotopes of the same species or individually addressable ions. Each of these approaches have challenges associated with them, which include increased hardware complexity, reduced efficiency of radial mode cooling and re-ordering events which add additional experimental overhead. We demonstrate a sympathetic cooling scheme leveraging internal metastable atomic levels accessible via a narrow quadrupole transition, utilizing the natural Zeeman shift and individually addressed Raman transitions, to achieve isolation of the non-coolant or ``data ions" from coolant ions. We demonstrate modest decoherence of the data ions due to cooling, while preserving the coherence requirements for high-fidelity gate operations.
Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single 171Yb+^{171}Yb^+171Yb+ ion through a 90° turn in 5μs5μs5μs at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about 30%30\%30% across various circuit types. The fraction of execution time spent on transport decreases from approximately 70%70\%70% to 55%55\%55%. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.
Sympathetic cooling is a technique often employed to mitigate motional heating in trapped-ion quantum computers. However, choosing system parameters such as number of coolants and cooling duty cycle for optimal gate performance requires evaluating trade-offs between motional errors and other slower errors such as qubit dephasing. The optimal parameters depend on cooling power, heating rate, and ion spacing in a particular system. In this study, we aim to analyze best practices for sympathetic cooling of long chains of trapped ions using analytical and computational methods. We use a case study to show that optimal cooling performance is achieved when coolants are placed at the center of the chain and provide a perturbative upper bound on the cooling limit of a mode given a particular set of cooling parameters. In addition, using computational tools, we analyze the trade-off between the number of coolant ions in a chain and the center-of-mass mode heating rate. We also show that cooling as often as possible when running a circuit is optimal when the qubit coherence time is otherwise long. These results provide a roadmap for how to choose sympathetic cooling parameters to maximize circuit performance in trapped-ion quantum computers using long chains of ions. Published by the American Physical Society 2024