Abstract Magnetic field sensors based on quantum sensing effects demonstrate significantly superior sensitivity compared to traditional sensors. Among these, diamond NV centers have emerged as the most promising quantum magnetic field sensors for practical industrial implementation at room temperature. However, current applications of diamond NV centers in power measurement face challenges due to insufficient measurement response speed. To address this challenge, this paper designs a rapid diamond NV-center magnetic field measurement system based on fast demodulation and ultrafast frequency agility. To this end, this paper employs a field-programmable gate array (FPGA) board-level device to implement signal demodulation and microwave control, thereby enabling a rapid magnetic field measurement system for diamond NV centers with fast demodulation and ultrafast frequency switching. By outputting current through a current source to a double-layer Helmholtz coil, the system generated a z-axis magnetic field. The system achieved a current measurement accuracy of 0.08% within the range of 0.5–10 A, with a static magnetic field sensitivity exceeding 8.30 nT/Hz 1 / 2 . The designed system achieves signal demodulation within less than 80 μs and frequency hopping of modulated microwave signals within less than 1 μs. Compared to benchtop systems, the measurement response speed has been improved from the second-level timescale to the millisecond-level timescale.
Abstract Magnetic field sensors based on quantum sensing effects demonstrate significantly superior sensitivity compared to traditional sensors. Among these, diamond NV centers have emerged as the most promising quantum magnetic field sensors for practical industrial implementation at room temperature. However, current applications of diamond NV centers in power measurement face challenges due to insufficient measurement response speed. To address this challenge, this paper designs a rapid diamond NV-center magnetic field measurement system based on fast demodulation and ultrafast frequency agility. To this end, this paper employs a field-programmable gate array (FPGA) board-level device to implement signal demodulation and microwave control, thereby enabling a rapid magnetic field measurement system for diamond NV centers with fast demodulation and ultrafast frequency switching. By outputting current through a current source to a double-layer Helmholtz coil, the system generated a z-axis magnetic field. The system achieved a current measurement accuracy of 0.08% within the range of 0.5–10 A, with a static magnetic field sensitivity exceeding 8.30 nT/Hz 1 / 2 . The designed system achieves signal demodulation within less than 80 μs and frequency hopping of modulated microwave signals within less than 1 μs. Compared to benchtop systems, the measurement response speed has been improved from the second-level timescale to the millisecond-level timescale.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.
Nitrogen-vacancy (NV) color centers in diamond are promising solid-state quantum sensors working at room temperature. The number of NV centers limits the magnetic sensitivity of the quantum magnetometer. Increasing the number of NV centers is a challenging task due to technical issues such as microwave power density, detection noise.Here, we developed the sensor system with a large detection volume which contains a lot of NV centers. The microwave circuit enhances microwave power density. Digital filter with frequency modulation of microwave allows us to detect the magnetic field with low noise. Consequently, we obtained a DC magnetic field sensitivity of 980 pT/√Hz.This work was supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) Grant Number JPMXS0118067395.
Nitrogen-vacancy (NV) centers in diamond have emerged as a robust room-temperature solid-state platform for weak magnetic field detection. Several NV-based magnetometers have been proposed in the past decades, but they still suffer from either low sensitivity or high power consumption. This is a challenge for sensors deployed in remote locations on Earth or in space that are not connected to the power grid. Although sunlight-driven quantum magnetometry, which does not rely on conventional energy sources, has been proposed as a possible solution, its sensitivity remains a limitation. Here, we present an impressive improvement in the sensitivity of the sunlight-driven NV-diamond quantum magnetometer. A crucial aspect of our approach involves leveraging the ground-state level anti-crossing properties of the NV centers, coupled with magnetic flux concentrators. This integration enables us to achieve a magnetic-field sensitivity of 26 pT/Hz in a laboratory environment and 49 pT/Hz when the magnetometer operates outdoors under sunlight. We also illustrate the promising potential of further improving the sensitivity to the subpicotesla level by using cutting-edge technologies. Furthermore, we reveal the capability of this quantum magnetometer as a receiver of extremely low-frequency magnetic signals and pave the way for communication applications. These advancements represent a significant leap toward attaining high-sensitivity and energy-efficient magnetic field sensing and expanding the range of possible applications for these environmentally sustainable quantum technologies.
An ensemble of nitrogen-vacancy (NV) centers in diamond is an attractive device to detect small magnetic fields. In particular, by exploiting the fact that the NV center can be aligned along one of four different axes due to ${C}_{3\ensuremath{\nu}}$ symmetry, it is possible to extract information concerning vector magnetic fields. However, in the conventional scheme, low readout contrasts of the NV centers significantly decrease the sensitivity of the vector-magnetic-field sensing. Here, we propose a way to improve the sensitivity of the vector-magnetic-field sensing of the NV centers using multifrequency control. Since the Zeeman energy of the NV centers depends on the direction of the axis, we can independently control the four types of NV centers using microwave pulses with different frequencies. This allows us to use every NV center for the vector field detection in parallel, which effectively increases the readout contrast. Our results pave the way to realize a practical diamond-based vector field sensor.
Quantum sensors encompass a diverse class of devices that exploit quantum coherence to detect weak or nanoscale signals. As their behavior is tied to physical constants, quantum sensors can achieve accuracy, repeatability, and precision approaching fundamental limits [1, 2]. As a result, these sensors have shown utility in a wide range of applications in both science and engineering leading to innovations. Among many solid-state spin systems, nitrogen-vacancy (NV) centers in diamonds have attracted considerable attention as a leading platform in many fields of quantum technologies, from quantum sensing to information processing and communication applications. They have superior physical properties, and their quantum coherence is preserved even at room temperature. The energy levels of NV centers are sensitive to magnetic fields, electric fields, strain, and temperature, and the spatial resolution is scalable from nanometers to millimeters. Therefore, diamond quantum sensors are distinctive sensors with multimodality and span scalable application fields. To realize an ideal quantum sensor for applications, the technical challenges in the sensor materials and the quantum control techniques, such as coherent microwave spin manipulation, effective optical spin-state initialization, and readout, have been developed. This chapter briefly explains the sensing principle using NV centers and then introduces sensor systems for biomedical applications, and monitoring of batteries for electric vehicles and internal power devices.