Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.10504 · Physical Review Accelerators and Beams

Compact ultracold electron source based on a grating magneto-optical trap

J. G. H. Franssen, T. C. H. de Raadt, M. A. W. van Ninhuijs, O.J. Luiten

Published Feb 8, 2019• 43 citations
arXivHTMLPDF

Abstract

The ultrafast and ultracold electron source, based on near-threshold photoionization of a laser-cooled and trapped atomic gas, offers a unique combination of low transverse beam emittance and high bunch charge.Its use is however still limited because of the required cold-atom laser-cooling techniques.Here we present a compact ultracold electron source based on a grating magneto-optical trap (GMOT), which only requires one trapping laser beam that passes through a transparent accelerator module.This makes the technique more widely accessible and increases its applicability.We show the GMOT can be operated with a hole in the center of the grating and with large electric fields applied across the trapping region, which is required for extracting electron bunches.The calculated values of the applied electric field were found to agree well with measured Stark shifts of the laser cooling transition.The electron beams extracted from the GMOT have been characterized.Beam energies up to 10 keV were measured using a time-of-flight method.The normalized root-mean-squared transverse beam emittance was determined using a waist scan method, resulting in ϵ ¼ 1.9 nm rad.The root-mean-squared transverse size of the ionization volume is 30 μm or larger, implying an electron source temperature in the few-10 K range, 2-3 orders of magnitude lower than conventional electron sources, based on photoemission or thermionic emission from solid state surfaces.

DOI
10.1103/physrevaccelbeams.22.023401

Related papers

Subpicosecond Ultracold Electron Source

T. C. H. de Raadt, J. G. H. Franssen, O.J. Luiten

We present the first observation of subpicosecond electron bunches from an ultracold electron source. This source is based on near-threshold, two-step, femtosecond photoionization of laser-cooled rubidium gas in a grating magneto-optical trap. Bunch lengths as short as 735±7 fs (rms) have been measured in the self-compression point of the source by means of ponderomotive scattering of the electrons by a 25 fs, 800 nm laser pulse. The observed temporal structure of the electron bunch depends on the central wavelength of the ionization laser pulse, in agreement with detailed simulations of the atomic photoionization process. This shows that the bunch length limit imposed by the atomic photoionization process has been reached.

Physical Review Letters•May 17, 2023•14 citations

The AC-MOT cold atom electron source

Michael E. Jones

This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.

•May 31, 2019•1 citation

Rapid axial loading of a grating MOT with a cold-atom beam

Rachel Cannon, Aidan S. Arnold, Paul F. Griffin +2 more

Abstract Laser-cooled atoms are increasingly being used to realise practical quantum devices, motivating the development of compact and robust atom sources. Grating magneto-optical traps (gMOTs) simplify the cold-atom source architecture but are typically vapour-loaded and provide limited atomic flux. Here we explore the loading of gMOTs from cold-atom beams. We numerically simulate loading to show that unbalanced diffracted beams deflect incoming atoms away from the trap centre, thereby strongly constraining radial loading. In contrast, axial loading injects atoms directly into the trapping volume and largely avoids these effects. We experimentally demonstrate rapid axial loading of a gMOT, achieving loading rates of $2.1 \times 10^{9}$ 2.1 × 10 9 atoms s −1 using a moving optical molasses to transfer atoms from a 2D MOT into the gMOT. These results establish axial loading as a robust route to high-flux gMOT operation for portable cold-atom systems.

arXiv:2603.29580•EPJ Quantum Technology•Jun 19, 2026•1 citation

Design and optimization of grating chip for compact magneto-optical trap

Jing Dong, Xiao‐Kuan Li, Wei Li

Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Kelvin-Temperature Ultracold Electron Beam

Haoyu Huang, Haibo Wang, Jianing Sun +4 more

Abstract We report an ultracold electron beam with Kelvin-level transverse temperature generated from a cold atom electron source by two-color near-threshold photoionization of 87 Rb atoms in a magneto-optical trap. A novel self-referenced scheme was employed to precisely determine its transverse temperature. In this scheme, a 3×3 beam array was generated to provide an in situ reference, allowing the transfer-matrix element to be determined directly from the measured grid pattern. The transverse momentum spread of the central beam at the source plane is then retrieved, yielding a transverse temperature of T = 2.0 ± 1.0 K, with the corresponding intrinsic coherence length of L c = 21.1 ±5.0 nm and a relative coherence length of C ⊥ = (1.3 ± 0.4) × 10 -3 . The new scheme significantly suppresses the influence of residual magnetic fields, electric field inhomogeneities and electron-optical aberrations. A non-monotonic dependence of the transverse temperature on excess energy was observed and was qualitatively explained by the simulation using a polarization-dependent single-atom Coulomb-Stark trajectory model.

Chinese Physics Letters•Nov 2, 2026•0 citations

Proposal on Distancing gMOT Center from Grating Structure

T. Kishimoto

We propose a new optical configuration for compact quantum sensors that utilizes gratings and distance ultracold atomic samples from the grating structure. We show that the new configuration enables the center of the so-called grating Magneto-Optical Trap(gMOT), which is a laser-cooled ultracold atomic sample, to be realized more than a centimeter away from the grating plane without facing input laser beam power limitations.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 31, 2022•1 citation
The ultrafast and ultracold electron source, based on near-threshold photoionization of a laser-cooled and trapped atomic gas, offers a unique combination of low transverse beam emittance and high bunch charge.Its use is however still limited because of the required cold-atom laser-cooling techniques.Here we present a compact ultracold electron source based on a grating magneto-optical trap (GMOT), which only requires one trapping laser beam that passes through a transparent accelerator module.This makes the technique more widely accessible and increases its applicability.We show the GMOT can be operated with a hole in the center of the grating and with large electric fields applied across the trapping region, which is required for extracting electron bunches.The calculated values of the applied electric field were found to agree well with measured Stark shifts of the laser cooling transition.The electron beams extracted from the GMOT have been characterized.Beam energies up to 10 keV were measured using a time-of-flight method.The normalized root-mean-squared transverse beam emittance was determined using a waist scan method, resulting in ϵ ¼ 1.9 nm rad.The root-mean-squared transverse size of the ionization volume is 30 μm or larger, implying an electron source temperature in the few-10 K range, 2-3 orders of magnitude lower than conventional electron sources, based on photoemission or thermionic emission from solid state surfaces.
We present the first observation of subpicosecond electron bunches from an ultracold electron source. This source is based on near-threshold, two-step, femtosecond photoionization of laser-cooled rubidium gas in a grating magneto-optical trap. Bunch lengths as short as 735±7 fs (rms) have been measured in the self-compression point of the source by means of ponderomotive scattering of the electrons by a 25 fs, 800 nm laser pulse. The observed temporal structure of the electron bunch depends on the central wavelength of the ionization laser pulse, in agreement with detailed simulations of the atomic photoionization process. This shows that the bunch length limit imposed by the atomic photoionization process has been reached.
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.
Abstract Laser-cooled atoms are increasingly being used to realise practical quantum devices, motivating the development of compact and robust atom sources. Grating magneto-optical traps (gMOTs) simplify the cold-atom source architecture but are typically vapour-loaded and provide limited atomic flux. Here we explore the loading of gMOTs from cold-atom beams. We numerically simulate loading to show that unbalanced diffracted beams deflect incoming atoms away from the trap centre, thereby strongly constraining radial loading. In contrast, axial loading injects atoms directly into the trapping volume and largely avoids these effects. We experimentally demonstrate rapid axial loading of a gMOT, achieving loading rates of 2.1×1092.1 \times 10^{9}2.1×109 2.1 × 10 9 atoms s −1 using a moving optical molasses to transfer atoms from a 2D MOT into the gMOT. These results establish axial loading as a robust route to high-flux gMOT operation for portable cold-atom systems.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
Abstract We report an ultracold electron beam with Kelvin-level transverse temperature generated from a cold atom electron source by two-color near-threshold photoionization of 87 Rb atoms in a magneto-optical trap. A novel self-referenced scheme was employed to precisely determine its transverse temperature. In this scheme, a 3×3 beam array was generated to provide an in situ reference, allowing the transfer-matrix element to be determined directly from the measured grid pattern. The transverse momentum spread of the central beam at the source plane is then retrieved, yielding a transverse temperature of T = 2.0 ± 1.0 K, with the corresponding intrinsic coherence length of L c = 21.1 ±5.0 nm and a relative coherence length of C ⊥ = (1.3 ± 0.4) × 10 -3 . The new scheme significantly suppresses the influence of residual magnetic fields, electric field inhomogeneities and electron-optical aberrations. A non-monotonic dependence of the transverse temperature on excess energy was observed and was qualitatively explained by the simulation using a polarization-dependent single-atom Coulomb-Stark trajectory model.