Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

Comparative study of high-$J_{c}$ and low-$J_{c}$ SFQ microwave generators for transmon control

Hongxiang Shen, Wenhui Luo, Nobuyuki Yoshikawa

Published Apr 24, 2026• 1 citation
Publisher

Abstract

Abstract Scalability of superconducting quantum processors is increasingly constrained by the thermal load and wiring overhead associated with room-temperature control hardware. Cryogenic control interfaces based on single-flux-quantum (SFQ) logic offer a potential route to alleviating these bottlenecks, although their dissipation depends sensitively on the Josephson-junction critical current and the underlying fabrication process. In this work, we comparatively investigate SFQ-synthesized microwave generators implemented in high- and low-critical-current processes, and evaluate their suitability for transmon qubit control through a combination of experimental characterization and hybrid QuTiP–JoSIM analysis. By modulating SFQ pulse intervals, we synthesize coherent microwave drives and obtain single-qubit gate fidelities above 99.9% at 10 mK in QuTiP-based simulations for both implementations. The low- $J_{\mathrm{c}}$ J c implementation exhibits reduced phase-noise-induced error, achieves higher gate fidelity within its valid bias window, and shows improved robustness against frequency detuning, while the high- $J_{\mathrm{c}}$ J c implementation maintains a lower broadband noise floor. Using an explicit model of thermal dissipation and circuit footprint, we further estimate the integration limits of cryogenic control channels. The results show that reducing the switching current substantially relaxes the cooling-budget constraint and increases the number of channels that can be deployed simultaneously. These results clarify the trade-offs associated with implementing SFQ microwave generators in different fabrication processes and provide practical guidance for the design of scalable cryogenic qubit-control interfaces.

DOI
10.1140/epjqt/s40507-026-00514-x

Related papers

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•13 citations

High-speed control of a fluxonium qubit via picosecond pulses from Josephson digital circuits

M. V. Bastrakova, D. S. Pashin, V. A. Vozhakov +2 more

We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above $99.99\%$; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.

arXiv:2611.14358•Physical Review Applied•Nov 3, 2026•0 citations

Flux-bias-free flux qubit driven by low-power single-flux-quantum driver on monolithically integrated circuit

Duong Pham, Tomoharu Ueda, Shigeyuki Miyajima +5 more

Single-flux-quantum (SFQ) cryogenic control circuits are a promising approach for realizing scalable superconducting quantum processors. However, previous studies have primarily relied on conventional SFQ technologies with Josephson junction critical current densities ( \(J_{\mathrm{C}}\) ) of about 1 kA/cm 2 and critical currents ( \(I_{\mathrm{C}}\) ) of several hundred microamperes. Such large critical currents can increase power dissipation and induce nonequilibrium quasiparticles that degrade qubit performance. In this study, we demonstrate coherent control of a flux-bias-free (FBF) flux qubit using a low-power SFQ driver monolithically integrated on the same chip. The SFQ driver was fabricated using epitaxial NbN/AlN/NbN Josephson junctions with critical currents of only a few microamperes, approximately two orders of magnitude smaller than those used in conventional SFQ circuits. Using this low- \(I_{\mathrm{C}}\) SFQ driver, we found that the energy relaxation time, \(T_{1}\) , of the FBF qubit remains comparable to that obtained under conventional microwave control, indicating that the low- \(I_{\mathrm{C}}\) SFQ driver does not introduce a measurable degradation of qubit performance in the present device.

EPJ Quantum Technology•Jul 9, 2026•0 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations

Amplitude-controllable microwave pulse generator using single-flux-quantum pulse pairs for qubit control

Hongxiang Shen, Naoki Takeuchi, Yuki Yamanashi +1 more

Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.

Superconductor Science and Technology•Jul 19, 2023•11 citations

Interface Architectures for Low-Latency Cryogenic Control in Quantum-Classical Systems

Krishna Yaduvanshi

As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.

International Journal of Research Publication and Reviews•Oct 1, 2026•0 citations
Comparative study of high-JcJ_{c}Jc​ and low-JcJ_{c}Jc​ SFQ microwave generators for transmon control
Abstract Scalability of superconducting quantum processors is increasingly constrained by the thermal load and wiring overhead associated with room-temperature control hardware. Cryogenic control interfaces based on single-flux-quantum (SFQ) logic offer a potential route to alleviating these bottlenecks, although their dissipation depends sensitively on the Josephson-junction critical current and the underlying fabrication process. In this work, we comparatively investigate SFQ-synthesized microwave generators implemented in high- and low-critical-current processes, and evaluate their suitability for transmon qubit control through a combination of experimental characterization and hybrid QuTiP–JoSIM analysis. By modulating SFQ pulse intervals, we synthesize coherent microwave drives and obtain single-qubit gate fidelities above 99.9% at 10 mK in QuTiP-based simulations for both implementations. The low- JcJ_{\mathrm{c}}Jc​ J c implementation exhibits reduced phase-noise-induced error, achieves higher gate fidelity within its valid bias window, and shows improved robustness against frequency detuning, while the high- JcJ_{\mathrm{c}}Jc​ J c implementation maintains a lower broadband noise floor. Using an explicit model of thermal dissipation and circuit footprint, we further estimate the integration limits of cryogenic control channels. The results show that reducing the switching current substantially relaxes the cooling-budget constraint and increases the number of channels that can be deployed simultaneously. These results clarify the trade-offs associated with implementing SFQ microwave generators in different fabrication processes and provide practical guidance for the design of scalable cryogenic qubit-control interfaces.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.
We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above 99.99%99.99\%99.99%; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.
Single-flux-quantum (SFQ) cryogenic control circuits are a promising approach for realizing scalable superconducting quantum processors. However, previous studies have primarily relied on conventional SFQ technologies with Josephson junction critical current densities ( JCJ_{\mathrm{C}}JC​ ) of about 1 kA/cm 2 and critical currents ( ICI_{\mathrm{C}}IC​ ) of several hundred microamperes. Such large critical currents can increase power dissipation and induce nonequilibrium quasiparticles that degrade qubit performance. In this study, we demonstrate coherent control of a flux-bias-free (FBF) flux qubit using a low-power SFQ driver monolithically integrated on the same chip. The SFQ driver was fabricated using epitaxial NbN/AlN/NbN Josephson junctions with critical currents of only a few microamperes, approximately two orders of magnitude smaller than those used in conventional SFQ circuits. Using this low- ICI_{\mathrm{C}}IC​ SFQ driver, we found that the energy relaxation time, T1T_{1}T1​ , of the FBF qubit remains comparable to that obtained under conventional microwave control, indicating that the low- ICI_{\mathrm{C}}IC​ SFQ driver does not introduce a measurable degradation of qubit performance in the present device.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.
Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.
As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.