Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Study on Configuration of Single-Flux-Quantum Circuits for Increasing Throughput

Ikki Nagaoka

Published Mar 27, 2023• 0 citations
OpenAlex

Related papers

High-Throughput Low-Latency Single-Flux-Quantum Circuits with Feedback Path

Ryota Kashima, Ikki Nagaoka, Tomoki Nakano +3 more

IEICE Technical Report; IEICE Tech. Rep.•Jul 30, 2021•0 citations

Demonstration of chip-to-chip transmission of single-flux-quantum pulses at throughputs beyond 100 Gbps

Yoshihito Hashimoto, Shinichi Yorozu, T. Satoh +1 more

We report a demonstration of single-flux-quantum (SFQ) pulse transmission between superconductor chips at throughputs beyond 100 Gbps. A fabrication process with a high junction critical current density of 10kA∕cm2 was used to increase the operation speed of a pulse driver and receiver. The chips were flip-chip bonded on a passive microstrip carrier using small solder bumps with diameters of 30μm. With experiments based on a ring-shaped circuit, chip-to-chip SFQ pulse transmission has been demonstrated up to 117 Gbps with an error rate of less than 10−15. The power dissipated by the driver and receiver was only 0.24μW at 117 Gbps.

Applied Physics Letters•Jul 5, 2005•42 citations

A new optimization procedure for single flux quantum circuits

N Mori, A. Akahori, Tomoyuki Sato +3 more

Physica C Superconductivity•Aug 1, 2001•54 citations

A New Design Approach for High-Throughput Arithmetic Circuits for Single-Flux-Quantum Microprocessors

Masamitsu Tanaka, Yuki Yamanashi, Yoshiaki Kamiya +7 more

We propose a new design approach for high- throughput arithmetic circuits based on state transitions using single-flux-quantum (SFQ) logic circuits. Microprocessors have several complex interconnects in datapath including loops of data, to which only one SFQ pulse is allowed to be confined, and the loops can spoil the high-throughput nature of SFQ circuits. In our new approach, we regard an arithmetic circuit with loops as a sequential logic circuit, and we use nondestructive readout gates (NDROs) as storage elements of the internal state. We can eliminate the loops and achieve high throughput by translating calculations into transitions of the state stored in the NDROs. We have implemented a bit-serial adder with the proposed approach, and demonstrated 36-GHz operations using the niobium 2.5-kA/cm2standard process technology.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•11 citations

Design infrastructure for Rapid Single Flux Quantum circuits

Hannes Toepfer, Thomas Ortlepp

Cryogenics•Feb 26, 2009•8 citations

Single-Flux-Quantum (SFQ) Circuit Design and Test of Crossbar Switch Scheduler

Y. Kameda, Shinichi Yorozu, Y. Hashimoto +3 more

A single-flux-quantum (SFQ) device provides fast operation with low power consumption. As SFQ devices can be applied in network switches requiring high throughput, we have been developing an SFQ network switch system. Not only the switch fabric but also the switch scheduler is a key component for a high-throughput network switch. The switch scheduler orders multiple inputs to a single output at the same time to prevent collisions from occurring in the switch fabric. The scheduling time becomes longer as the number of switch ports increases, because the scheduler must scan requests from all input ports. We designed two types of 4-port arbiters (i.e. switch scheduler sub-circuits) with structures based on serial or parallel processing. We chose to implement and demonstrate the serial arbiter because it has a smaller number of gates. It consisted of about 1800 Josephson junctions, including on-chip test circuitry. We tested a fabricated circuit at high speed and confirmed its correct operation at 40 GHz.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•18 citations
We report a demonstration of single-flux-quantum (SFQ) pulse transmission between superconductor chips at throughputs beyond 100 Gbps. A fabrication process with a high junction critical current density of 10kA∕cm2 was used to increase the operation speed of a pulse driver and receiver. The chips were flip-chip bonded on a passive microstrip carrier using small solder bumps with diameters of 30μm. With experiments based on a ring-shaped circuit, chip-to-chip SFQ pulse transmission has been demonstrated up to 117 Gbps with an error rate of less than 10−15. The power dissipated by the driver and receiver was only 0.24μW at 117 Gbps.
We propose a new design approach for high- throughput arithmetic circuits based on state transitions using single-flux-quantum (SFQ) logic circuits. Microprocessors have several complex interconnects in datapath including loops of data, to which only one SFQ pulse is allowed to be confined, and the loops can spoil the high-throughput nature of SFQ circuits. In our new approach, we regard an arithmetic circuit with loops as a sequential logic circuit, and we use nondestructive readout gates (NDROs) as storage elements of the internal state. We can eliminate the loops and achieve high throughput by translating calculations into transitions of the state stored in the NDROs. We have implemented a bit-serial adder with the proposed approach, and demonstrated 36-GHz operations using the niobium 2.5-kA/cm2standard process technology.
A single-flux-quantum (SFQ) device provides fast operation with low power consumption. As SFQ devices can be applied in network switches requiring high throughput, we have been developing an SFQ network switch system. Not only the switch fabric but also the switch scheduler is a key component for a high-throughput network switch. The switch scheduler orders multiple inputs to a single output at the same time to prevent collisions from occurring in the switch fabric. The scheduling time becomes longer as the number of switch ports increases, because the scheduler must scan requests from all input ports. We designed two types of 4-port arbiters (i.e. switch scheduler sub-circuits) with structures based on serial or parallel processing. We chose to implement and demonstrate the serial arbiter because it has a smaller number of gates. It consisted of about 1800 Josephson junctions, including on-chip test circuitry. We tested a fabricated circuit at high speed and confirmed its correct operation at 40 GHz.