Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Technical Report; IEICE Tech. Rep.

High-Throughput Low-Latency Single-Flux-Quantum Circuits with Feedback Path

Ryota Kashima, Ikki Nagaoka, Tomoki Nakano, Masamitsu Tanaka, Taro Yamashita, Akira Fujimaki

Published Jul 30, 2021• 0 citations
OpenAlex

Related papers

Study on Configuration of Single-Flux-Quantum Circuits for Increasing Throughput

Ikki Nagaoka

•Mar 27, 2023•0 citations

A High-Throughput Single-Flux Quantum Floating-Point Serial Divider Using the Signed-Digit Representation

Masamitsu Tanaka, Koji Obata, Kazumasa Takagi +3 more

We propose a floating-point serial divider for a single-flux quantum (SFQ) logic implementation based on a hardware algorithm of division using subtract and shift operations. Fast serial calculations are performed by utilizing the signed-digit representation. The divider is implemented with a regularly aligned pipeline structure called a systolic array. The processing element of the systolic array is designed using several logic gates unique to the SFQ circuits, to reduce the number of pipeline stages. As a result, high throughput and low latency is achieved with a small circuit size. The throughput approaches the maximum throughput of serial processing. A 4-bit divider was fabricated using the 2.5-kA/cm2niobium process technology, and successful operation up to 19 GHz was demonstrated.

IEEE Transactions on Applied Superconductivity•May 27, 2009•6 citations

Low power high speed computing using rapid single flux quantum circuits

Sasan Razmkhah

•Jan 1, 2018•0 citations

A High-Throughput Multiply-Accumulate Unit With Long Feedback Loop Using Low-Voltage Rapid Single-Flux Quantum Circuits

Ikki Nagaoka, Ryota Kashima, Koki Ishida +5 more

In this article, we demonstrated a high-throughput gate-level-pipelined 8-bit multiply-accumulate (MAC) unit with a long feedback loop using low-voltage rapid single-flux quantum (LV-RSFQ) logic. The long feedback loop in the MAC unit is an obstacle for high-throughput operation because the logic gates must wait for the delayed inputs from the feedback loop. The LV-RSFQ logic makes high-frequency operation even more difficult by larger and more variable feedback delay. We design the feedback loop by using counter-flow clocking and adding many D flip-flops to divide the long feedback loop into shorter paths. The target clock frequency of the MAC unit with a feedback loop was set to 30 GHz by the experimental results of the MAC unit without a feedback loop. We model the clock frequency and its circuit overhead in a feedback loop to design the feedback loop in the MAC unit achieving 30 GHz with a minimum overhead. The test chips are fabricated using the national institute of advanced industrial science and technology (AIST) 10-kA/cm$\boldsymbol{^{2}}$Advanced Process 2. We have successfully obtained high-throughput 30-GHz operations in the LV-RSFQ MAC unit with a long feedback loop by using the model-based design. The maximum operating frequency of the MAC unit reaches 40 GHz.

IEEE Transactions on Applied Superconductivity•Jan 30, 2023•3 citations

Design infrastructure for Rapid Single Flux Quantum circuits

Hannes Toepfer, Thomas Ortlepp

Cryogenics•Feb 26, 2009•8 citations

Single-flux-quantum logic

T. Van Duzer

This paper reviews the several families of single-flux-quantum logic that have appeared in the literature as well as a new one designed in our Laboratory. Some of these have been evaluated in full-adder circuits and found to have approximately the same latency (time between input and output) as a voltage-state circuit. It is pointed out that the throughput of single-flux-quantum circuits can be much higher than with voltage-state circuits because of a much shorter reset time. The applications for these circuits are greatest in data-independent computation such as signal processing. The prospects and problems for these kinds of circuits are discussed both for low- and high-temperature superconductors.

•Mar 1, 1992•0 citations
We propose a floating-point serial divider for a single-flux quantum (SFQ) logic implementation based on a hardware algorithm of division using subtract and shift operations. Fast serial calculations are performed by utilizing the signed-digit representation. The divider is implemented with a regularly aligned pipeline structure called a systolic array. The processing element of the systolic array is designed using several logic gates unique to the SFQ circuits, to reduce the number of pipeline stages. As a result, high throughput and low latency is achieved with a small circuit size. The throughput approaches the maximum throughput of serial processing. A 4-bit divider was fabricated using the 2.5-kA/cm2niobium process technology, and successful operation up to 19 GHz was demonstrated.
In this article, we demonstrated a high-throughput gate-level-pipelined 8-bit multiply-accumulate (MAC) unit with a long feedback loop using low-voltage rapid single-flux quantum (LV-RSFQ) logic. The long feedback loop in the MAC unit is an obstacle for high-throughput operation because the logic gates must wait for the delayed inputs from the feedback loop. The LV-RSFQ logic makes high-frequency operation even more difficult by larger and more variable feedback delay. We design the feedback loop by using counter-flow clocking and adding many D flip-flops to divide the long feedback loop into shorter paths. The target clock frequency of the MAC unit with a feedback loop was set to 30 GHz by the experimental results of the MAC unit without a feedback loop. We model the clock frequency and its circuit overhead in a feedback loop to design the feedback loop in the MAC unit achieving 30 GHz with a minimum overhead. The test chips are fabricated using the national institute of advanced industrial science and technology (AIST) 10-kA/cm2\boldsymbol{^{2}}2Advanced Process 2. We have successfully obtained high-throughput 30-GHz operations in the LV-RSFQ MAC unit with a long feedback loop by using the model-based design. The maximum operating frequency of the MAC unit reaches 40 GHz.
This paper reviews the several families of single-flux-quantum logic that have appeared in the literature as well as a new one designed in our Laboratory. Some of these have been evaluated in full-adder circuits and found to have approximately the same latency (time between input and output) as a voltage-state circuit. It is pointed out that the throughput of single-flux-quantum circuits can be much higher than with voltage-state circuits because of a much shorter reset time. The applications for these circuits are greatest in data-independent computation such as signal processing. The prospects and problems for these kinds of circuits are discussed both for low- and high-temperature superconductors.