Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Hybrid System of Optical Nanofiber and Single Quantum Dot for Fiber In-Line Single Photon Generation

Muhammed Shafi Kodakkaden

Published Sep 30, 2020• 0 citations
Publisher

Abstract

Hybrid systems of nanophotonic structures and single quantum emitters have emerged as a promising direction for single photon generation in quantum photonic technologies.Strong confinement of the optical field in nanophotonic structures enables photon manipulation far beyond the free space.In this context, tapered optical fibers with sub-wavelength diameter waists, optical nanofibers, provide a unique platform.Regarding the single photon generation, a key advantage is the efficient fiber in-line operation, i.e. photons efficiently emitted into the guided-mode of the nanofiber adiabatically couples to that of a conventional single mode optical fiber with near-unity efficiency.Regarding the emitters for quantum photonics, solid-state emitters at cryogenic temperatures are preferred from the prospect of practical applications in quantum information technologies.In this thesis, a hybrid system of an optical nanofiber (ONF) and a single colloidal CdSe quantum dot (QD) operated at cryogenic temperature is developed and investigated from the viewpoint of fiber in-line single photon generation.Single CdSe core/shell QDs emitting at 640 nm are precisely deposited on the nanofiber surface.An optical cryostat cools the hybrid system to a temperature of 3.7 K via helium buffer-gas cooling, maintaining the high optical transmission of the ONF (94.5%).The photoluminescence (PL) characteristics of the QDs are investigated by observing the emitted photons through the fiber guided-modes.At 3.7 K, the emission spectrum of the single QDs showed two distinct narrow zero-phonon lines (∼350 µeV FWHM) compared to the broad spectral width (60 meV FWHM) at room temperature.viii These lines originate from the neutral and charged states of the QD emitting with near-unity quantum efficiency.The charged QDs are termed as trions.We systematically investigated the emission characteristics of the neutral and the trion states of the QD by spectral, temporal, and photon correlation measurements.The PL decay characteristics of these lines reveal that the upper state of neutral exciton consists of two levels, which effectively results in a fast and slow decay components with decay times of 3.1±0.1 and 153±5 ns, respectively.In contrast, the upper state of trion is one level leading to a single decay process with a decay time of 10.7±0.3 ns.From the viewpoint of single photon generation, the trion with a single upper level is preferable compared to the neutral exciton.Subsequently, a technique to control the occurrence of trion at cryogenic temperatures is developed.It is shown that the trion occurrence can be manipulated by photocharging the QD by exciting well above the band gap.Most notably, we established a method to create permanently charged QDs with all emissions into the trion zero-phonon line.Combining the photocharged single QDs in the hybrid system, we evaluated the performance of the system as an efficient fiber in-line single photon source.We show that the photocharged QDs exhibit a bright photo-stable emission of single photons with near-unity quantum efficiency, narrow spectral width and a fast single decay process.The efficiency of the source is estimated to be 16±2%, with a maximum photon count rate of 1.6±0.2MHz and a high single photon purity of g 2 (0)= 0.11±0.02.The ONF/QD hybrid system could be integrated into the fiber networks paving the way for potential applications in quantum information technologies.The efficiency of the source can be improved by incorporating a cavity structure on the ONF and establish a cavity QED system at cryogenic temperatures.Also, the system situation can be extended to various quantum emitters at different wavelengths.We discuss such ideas as future prospects.I would like to express my most sincere thanks to Prof. Kohzo Hakuta for his generous support and guidance during my Ph.D. at the Center for Photonic Innovations.I will remain grateful for his motivations, inspirational suggestions, and constructive criticism, teaching me a lot about doing research stringently and presenting the results properly.His deep vision has shaped the thesis into the present form.It was an absolute privilege to learn under his guidance.

DOI
10.18952/00009633

Related papers

Hybrid System of an Optical Nanofibre and a Single Quantum Dot Operated at Cryogenic Temperatures

K. Muhammed Shafi, Wei Luo, Ramachandrarao Yalla +4 more

Recent progress in quantum nanophotonics brings novel ways for manipulating single photons in various nano-waveguides. Among them, one promising approach is to use optical nanofibres (ONFs), tapered optical fibres with sub-wavelength diameter waists. Here, we develop a hybrid system of an ONF and a single quantum dot (QD) operated at cryogenic temperatures. We deposit a single colloidal CdSe QD on an ONF waist and observe emitted photons through the fibre guided modes. We systematically investigate emission characteristics for both the neutral exciton and charged exciton (trion) for one specific QD. We quantitatively show that the trion at cryogenic temperatures acts as an excellent quantum emitter for the ONF and QD hybrid system. The present ONF/QD hybrid system at cryogenic temperatures paves the way for quantum information technologies for manipulating single photons in fibre networks.

Scientific Reports•Sep 4, 2018•20 citations

Single Photon Generation and Spectroscopy Using Quantum Dots on Optical Nanofibers

Ramachandrarao Yalla

This thesis presents single photon generation and spectroscopy using quantum dots (q-dots) on optical nanofibers. Optical nanofibers are essentially vacuum-clad silica fibers with sub-wavelength diameter, which can support only the propagation of the fundamental mode through the guided mode. Optical nanofibers are realized using adiabatically tapered single mode optical fibers. Experiments were performed by depositing colloidal core-shell type CdSeTe (ZnS) q-dots on the optical nanofiber surface. A method is developed to deposit single q-dots systematically and reproducibly along the optical nanofiber. In the view point of investigation of fluorescence photon emission characteristics for single q-dots on optical nanofibers, the absolute fluorescence photon-count rates channeled into the nanofiber guided modes and the normalized photon correlations at various excitation laser intensities are measured. The results are able to obtain the product between the fluorescence photon channeling efficiency and the quantum efficiency of the single q-dots. However, the channeling efficiency cannot be determined without accurate information on the quantum efficiency of the single q-dots. Therefore, a method is devised to determine the channeling of fluorescence photons from single q-dots into the guided modes by measuring the fluorescence photon-count rates through the guided and radiation modes simultaneously. By measuring for various nanofiber diameters, a maximum channeling efficiency obtained to be 22.0 (±4.8)% at a fiber diameter of 350 nm for an emission wavelength of 780 nm. The measured results completely reproduce the theoretical predictions within the experimental error. We demonstrate in situ measurements of fluorescence quantum efficiency of single q-dots using the present nanofiber technique. We determine fluorescence quantum efficiency of single q-dots accurately by assuming the theoretical values for the channeling efficiency from the product of the channeling efficiency and the quantum efficiency. We demonstrate that one can pick up one q-dot on the nanofiber with fluorescence quantum efficiency higher than the average value measured for an ensemble. Thus, the optical nanofiber method offers a promising way for generating and manipulating single photons. This work should provide a basis for extending the optical nanofiber method to a general technique in quantum optics, which may open new possibilities in quantum information technologies.

•Jan 1, 2012•1 citation

Emission characteristics for a single CdSe quantum dot on an optical nanofiber at cryogenic temperatures

K. Muhammed Shafi, Wei Luo, Ramachandrarao Yalla +1 more

Abstract We investigate the emission characteristics of a single CdSe quantum dot on an optical nanofiber at cryogenic temperatures from the viewpoint of quantum photonics. We show that the charged exciton (trion) of the quantum dot is a promising quantum emitter for both aspects of spectral and temporal characteristics. The nanofiber/quantum-dot system may give a promising work bench for the future quantum photonic network.

Journal of Physics Conference Series•May 1, 2019•1 citation

Towards Efficient coupling of single nanodiamonds to an optical fibers for single photons emission

Lucien Belzane, Antonio Balena, Marianna D’Amato +4 more

The development of integrated quantum technologies relies on efficient single-photon sources and deterministic quantum operations. Solid-state quantum emitters coupled to nanophotonic structures present a promising solution. This work investigates color centers in nanodiamonds,particularly Germanium Vacancy (GeV) [1], Silicon Vacancy (SiV), and Magnesium Vacancy (MgV) centers, a novel, understudied emitter [2], at both room and cryogenic temperatures. These nanodiamonds are chosen for their stability and superior coherence properties at cryogenic conditions. To collect their emission we have successfully deposited a single GeV- nanodiamond on tapered optical nanofibers by gently contacting a diluted droplet to the nanofiber [3], demonstrating an average coupling of 15% into a conventional optical fiber through the confined evanescent field of the nanofiber mode and single photon emission. Building on this achievement, we aim to study the system at cryogenic temperatures, which should enable the demonstration of efficient and indistinguishable single photons coupling to conventional optical fibers.Current collection efficiencies are intrinsically limited to 30% with the nanofiber[4], and improving light-matter coupling efficiency remains a key goal for high-performance single-photon sources and more advanced applications.To achieve this, we are investigating a newly developed technique [5]: the deterministic fabrication of dielectric and plasmonic nanostructures directly on the nanofiber surface using an “electron beam induced deposition” (EBID). The precision and versatility of this technique openthe way to different applications: Purcell enhancement of the quantum emitter emission using metallic nanoantennas and efficient light-matter coupling using dielectric structures. Our first calculation shown that optimizing the composition, geometry, and placement of these nanostructures a simple pattern of carbon pillars around the emitter should increase coupling efficiency up to 69% while maintaining high transmission in the nanofiber. We also demonstratethe fabrication of those nanostructures on top of the nanofiber.This work advances integrated nanophotonic devices for single-photon sources.[1] M. Nahra et al.,Single germanium vacancy centers in nanodia-monds with bulk-like spectral stability, AVS Quantum Science3(1), (2021).[2] E. Corte et al, Magnesium-Vacancy Optical Centers in Diamond, ACS Photonics, 10(1), p101-110, (2023)[3] Pierini et al. Highly Photostable Perovskite Nanocubes : TowardIntegrated Single Photon Sources Based on Tapered Nanofibers.ACS Photonics, 7(8), p.2265-2272, (2020).[4] Fujiwara et al., Highly efficient coupling of photons from na-noemitters into single-mode optical fibers, Nano Letters, 11(10),4362–4365, (2011).[5] A.Balena et al, Deterministic Bottom-Up Fabrication of Plasmonic Nanostructures on OpticalNanofibers via Blurred Electron Beam Deposition (soon to be published in Advance Material).

•Oct 20, 2025•0 citations

Nanofiber quantum photonics

K. P. Nayak, Mark Sadgrove, Ramachandrarao Yalla +2 more

Abstract Recent advances in the coherent control of single quanta of light, photons , is a topic of prime interest, and is discussed under the banner of quantum photonics . In the last decade, the subwavelength diameter waist of a tapered optical fiber, referred to as an optical nanofiber , has opened promising new avenues in the field of quantum optics, paving the way toward a versatile platform for quantum photonics applications. The key feature of the technique is that the optical field can be tightly confined in the transverse direction while propagating over long distances as a guided mode and enabling strong interaction with the surrounding medium in the evanescent region. This feature has led to surprising possibilities to manipulate single atoms and fiber-guided photons, e.g. the efficient channeling of emission from single atoms and solid-state quantum emitters into the fiber-guided modes, high optical depth with a few atoms around the nanofiber, trapping atoms around a nanofiber, and atomic memories for fiber-guided photons. Furthermore, implementing a moderate longitudinal confinement in nanofiber cavities has enabled the strong coupling regime of cavity quantum electrodynamics to be reached, and the long-range dipole–dipole interaction between quantum emitters mediated by the nanofiber offers a platform for quantum nonlinear optics with an ensemble of atoms. In addition, the presence of a longitudinal component of the guided field has led to unique capabilities for chiral light–matter interactions on nanofibers. In this article, we review the key developments of the nanofiber technology toward a vision for quantum photonics on an all-fiber interface.

Journal of Optics•May 9, 2018•127 citations

Quantum Photonics on a Tapered Optical Fiber

K. P. Nayak

A tapered optical fiber with subwavelength diameter waist, an optical nanofiber, provides a unique and all-fiber platform for manipulating atoms and photons. This paper presents some recent results towards quantum photonics on a nanofiber platform. In one direction, we demonstrate a quantum interface between trapped single atoms and fiber-guided photons using a nanofiber cavity. In the other direction, we demonstrate a polarized fiber-in-line quantum light source using a hybrid system of a single gold nanorod and single quantum dot deposited on a nanofiber.

Opto-Electronics and Communications Conference (OECC)•Jul 2, 2023•0 citations
Hybrid systems of nanophotonic structures and single quantum emitters have emerged as a promising direction for single photon generation in quantum photonic technologies.Strong confinement of the optical field in nanophotonic structures enables photon manipulation far beyond the free space.In this context, tapered optical fibers with sub-wavelength diameter waists, optical nanofibers, provide a unique platform.Regarding the single photon generation, a key advantage is the efficient fiber in-line operation, i.e. photons efficiently emitted into the guided-mode of the nanofiber adiabatically couples to that of a conventional single mode optical fiber with near-unity efficiency.Regarding the emitters for quantum photonics, solid-state emitters at cryogenic temperatures are preferred from the prospect of practical applications in quantum information technologies.In this thesis, a hybrid system of an optical nanofiber (ONF) and a single colloidal CdSe quantum dot (QD) operated at cryogenic temperature is developed and investigated from the viewpoint of fiber in-line single photon generation.Single CdSe core/shell QDs emitting at 640 nm are precisely deposited on the nanofiber surface.An optical cryostat cools the hybrid system to a temperature of 3.7 K via helium buffer-gas cooling, maintaining the high optical transmission of the ONF (94.5%).The photoluminescence (PL) characteristics of the QDs are investigated by observing the emitted photons through the fiber guided-modes.At 3.7 K, the emission spectrum of the single QDs showed two distinct narrow zero-phonon lines (∼350 µeV FWHM) compared to the broad spectral width (60 meV FWHM) at room temperature.viii These lines originate from the neutral and charged states of the QD emitting with near-unity quantum efficiency.The charged QDs are termed as trions.We systematically investigated the emission characteristics of the neutral and the trion states of the QD by spectral, temporal, and photon correlation measurements.The PL decay characteristics of these lines reveal that the upper state of neutral exciton consists of two levels, which effectively results in a fast and slow decay components with decay times of 3.1±0.1 and 153±5 ns, respectively.In contrast, the upper state of trion is one level leading to a single decay process with a decay time of 10.7±0.3 ns.From the viewpoint of single photon generation, the trion with a single upper level is preferable compared to the neutral exciton.Subsequently, a technique to control the occurrence of trion at cryogenic temperatures is developed.It is shown that the trion occurrence can be manipulated by photocharging the QD by exciting well above the band gap.Most notably, we established a method to create permanently charged QDs with all emissions into the trion zero-phonon line.Combining the photocharged single QDs in the hybrid system, we evaluated the performance of the system as an efficient fiber in-line single photon source.We show that the photocharged QDs exhibit a bright photo-stable emission of single photons with near-unity quantum efficiency, narrow spectral width and a fast single decay process.The efficiency of the source is estimated to be 16±2%, with a maximum photon count rate of 1.6±0.2MHz and a high single photon purity of g 2 (0)= 0.11±0.02.The ONF/QD hybrid system could be integrated into the fiber networks paving the way for potential applications in quantum information technologies.The efficiency of the source can be improved by incorporating a cavity structure on the ONF and establish a cavity QED system at cryogenic temperatures.Also, the system situation can be extended to various quantum emitters at different wavelengths.We discuss such ideas as future prospects.I would like to express my most sincere thanks to Prof. Kohzo Hakuta for his generous support and guidance during my Ph.D. at the Center for Photonic Innovations.I will remain grateful for his motivations, inspirational suggestions, and constructive criticism, teaching me a lot about doing research stringently and presenting the results properly.His deep vision has shaped the thesis into the present form.It was an absolute privilege to learn under his guidance.
Recent progress in quantum nanophotonics brings novel ways for manipulating single photons in various nano-waveguides. Among them, one promising approach is to use optical nanofibres (ONFs), tapered optical fibres with sub-wavelength diameter waists. Here, we develop a hybrid system of an ONF and a single quantum dot (QD) operated at cryogenic temperatures. We deposit a single colloidal CdSe QD on an ONF waist and observe emitted photons through the fibre guided modes. We systematically investigate emission characteristics for both the neutral exciton and charged exciton (trion) for one specific QD. We quantitatively show that the trion at cryogenic temperatures acts as an excellent quantum emitter for the ONF and QD hybrid system. The present ONF/QD hybrid system at cryogenic temperatures paves the way for quantum information technologies for manipulating single photons in fibre networks.
This thesis presents single photon generation and spectroscopy using quantum dots (q-dots) on optical nanofibers. Optical nanofibers are essentially vacuum-clad silica fibers with sub-wavelength diameter, which can support only the propagation of the fundamental mode through the guided mode. Optical nanofibers are realized using adiabatically tapered single mode optical fibers. Experiments were performed by depositing colloidal core-shell type CdSeTe (ZnS) q-dots on the optical nanofiber surface. A method is developed to deposit single q-dots systematically and reproducibly along the optical nanofiber. In the view point of investigation of fluorescence photon emission characteristics for single q-dots on optical nanofibers, the absolute fluorescence photon-count rates channeled into the nanofiber guided modes and the normalized photon correlations at various excitation laser intensities are measured. The results are able to obtain the product between the fluorescence photon channeling efficiency and the quantum efficiency of the single q-dots. However, the channeling efficiency cannot be determined without accurate information on the quantum efficiency of the single q-dots. Therefore, a method is devised to determine the channeling of fluorescence photons from single q-dots into the guided modes by measuring the fluorescence photon-count rates through the guided and radiation modes simultaneously. By measuring for various nanofiber diameters, a maximum channeling efficiency obtained to be 22.0 (±4.8)% at a fiber diameter of 350 nm for an emission wavelength of 780 nm. The measured results completely reproduce the theoretical predictions within the experimental error. We demonstrate in situ measurements of fluorescence quantum efficiency of single q-dots using the present nanofiber technique. We determine fluorescence quantum efficiency of single q-dots accurately by assuming the theoretical values for the channeling efficiency from the product of the channeling efficiency and the quantum efficiency. We demonstrate that one can pick up one q-dot on the nanofiber with fluorescence quantum efficiency higher than the average value measured for an ensemble. Thus, the optical nanofiber method offers a promising way for generating and manipulating single photons. This work should provide a basis for extending the optical nanofiber method to a general technique in quantum optics, which may open new possibilities in quantum information technologies.
The development of integrated quantum technologies relies on efficient single-photon sources and deterministic quantum operations. Solid-state quantum emitters coupled to nanophotonic structures present a promising solution. This work investigates color centers in nanodiamonds,particularly Germanium Vacancy (GeV) [1], Silicon Vacancy (SiV), and Magnesium Vacancy (MgV) centers, a novel, understudied emitter [2], at both room and cryogenic temperatures. These nanodiamonds are chosen for their stability and superior coherence properties at cryogenic conditions. To collect their emission we have successfully deposited a single GeV- nanodiamond on tapered optical nanofibers by gently contacting a diluted droplet to the nanofiber [3], demonstrating an average coupling of 15% into a conventional optical fiber through the confined evanescent field of the nanofiber mode and single photon emission. Building on this achievement, we aim to study the system at cryogenic temperatures, which should enable the demonstration of efficient and indistinguishable single photons coupling to conventional optical fibers.Current collection efficiencies are intrinsically limited to 30% with the nanofiber[4], and improving light-matter coupling efficiency remains a key goal for high-performance single-photon sources and more advanced applications.To achieve this, we are investigating a newly developed technique [5]: the deterministic fabrication of dielectric and plasmonic nanostructures directly on the nanofiber surface using an “electron beam induced deposition” (EBID). The precision and versatility of this technique openthe way to different applications: Purcell enhancement of the quantum emitter emission using metallic nanoantennas and efficient light-matter coupling using dielectric structures. Our first calculation shown that optimizing the composition, geometry, and placement of these nanostructures a simple pattern of carbon pillars around the emitter should increase coupling efficiency up to 69% while maintaining high transmission in the nanofiber. We also demonstratethe fabrication of those nanostructures on top of the nanofiber.This work advances integrated nanophotonic devices for single-photon sources.[1] M. Nahra et al.,Single germanium vacancy centers in nanodia-monds with bulk-like spectral stability, AVS Quantum Science3(1), (2021).[2] E. Corte et al, Magnesium-Vacancy Optical Centers in Diamond, ACS Photonics, 10(1), p101-110, (2023)[3] Pierini et al. Highly Photostable Perovskite Nanocubes : TowardIntegrated Single Photon Sources Based on Tapered Nanofibers.ACS Photonics, 7(8), p.2265-2272, (2020).[4] Fujiwara et al., Highly efficient coupling of photons from na-noemitters into single-mode optical fibers, Nano Letters, 11(10),4362–4365, (2011).[5] A.Balena et al, Deterministic Bottom-Up Fabrication of Plasmonic Nanostructures on OpticalNanofibers via Blurred Electron Beam Deposition (soon to be published in Advance Material).
Abstract Recent advances in the coherent control of single quanta of light, photons , is a topic of prime interest, and is discussed under the banner of quantum photonics . In the last decade, the subwavelength diameter waist of a tapered optical fiber, referred to as an optical nanofiber , has opened promising new avenues in the field of quantum optics, paving the way toward a versatile platform for quantum photonics applications. The key feature of the technique is that the optical field can be tightly confined in the transverse direction while propagating over long distances as a guided mode and enabling strong interaction with the surrounding medium in the evanescent region. This feature has led to surprising possibilities to manipulate single atoms and fiber-guided photons, e.g. the efficient channeling of emission from single atoms and solid-state quantum emitters into the fiber-guided modes, high optical depth with a few atoms around the nanofiber, trapping atoms around a nanofiber, and atomic memories for fiber-guided photons. Furthermore, implementing a moderate longitudinal confinement in nanofiber cavities has enabled the strong coupling regime of cavity quantum electrodynamics to be reached, and the long-range dipole–dipole interaction between quantum emitters mediated by the nanofiber offers a platform for quantum nonlinear optics with an ensemble of atoms. In addition, the presence of a longitudinal component of the guided field has led to unique capabilities for chiral light–matter interactions on nanofibers. In this article, we review the key developments of the nanofiber technology toward a vision for quantum photonics on an all-fiber interface.
A tapered optical fiber with subwavelength diameter waist, an optical nanofiber, provides a unique and all-fiber platform for manipulating atoms and photons. This paper presents some recent results towards quantum photonics on a nanofiber platform. In one direction, we demonstrate a quantum interface between trapped single atoms and fiber-guided photons using a nanofiber cavity. In the other direction, we demonstrate a polarized fiber-in-line quantum light source using a hybrid system of a single gold nanorod and single quantum dot deposited on a nanofiber.