Abstract Quantum sensors based on nitrogen vacancy (NV) defects in diamond have a demonstrated capability to detect nuclear magnetic resonance (NMR) spectra from proximate molecular nuclei, thereby promising an alternative with higher sensitivity to conventional NMR spectrometers for micro-scale samples. Fluorescence-based readout of these sensors is limited by higher shot noise due to the small number of emitters and photoionisation induced instabilities, meaning there is still significant scope to maximise their sensitivity and temporal resolution. In this work, we demonstrate a new readout protocol based on parameter fitting to a precise model of the NV photo-physics, thereby demonstrating an improvement of 36% in sensitivity and 85% gain in measurement speed. Whereas typical approaches to improvement involve expensive diamond material, and optical and microwave engineering, our method can be readily implemented into existing NV quantum sensing protocols.
Abstract Quantum sensors based on nitrogen vacancy (NV) defects in diamond have a demonstrated capability to detect nuclear magnetic resonance (NMR) spectra from proximate molecular nuclei, thereby promising an alternative with higher sensitivity to conventional NMR spectrometers for micro-scale samples. Fluorescence-based readout of these sensors is limited by higher shot noise due to the small number of emitters and photoionisation induced instabilities, meaning there is still significant scope to maximise their sensitivity and temporal resolution. In this work, we demonstrate a new readout protocol based on parameter fitting to a precise model of the NV photo-physics, thereby demonstrating an improvement of 36% in sensitivity and 85% gain in measurement speed. Whereas typical approaches to improvement involve expensive diamond material, and optical and microwave engineering, our method can be readily implemented into existing NV quantum sensing protocols.
The fluorescence of the nitrogen-vacancy (NV) centre in artificial diamond has been widely studied for applications such as quantum communication protocols, quantum computation, fluorescence-based biolabelling, and optical sensing. Optical sensing by itself encompasses a wide range of possible applications: from magnetic and electric field sensing to temperature sensing and enabling, for example, the detection of paramagnetic ions and the identification of molecules by nuclear magnetic resonance. Compared to many other systems capable of optical sensing, the NV centre works at room temperature, and its spin-dependent fluorescence emission is the key property to achieve a high sensitivity to the surrounding environment. Additionally, the NV centre emission is highly photostable, has a relatively short lifetime (~ 12ns) and spans a broad wavelength range, from the red to the near-infrared region of the electromagnetic spectrum (600 - 800nm). While the common denominator of all mentioned applications is the NV centre, the properties of the artificial diamond surrounding the NV centre have a significant impact on its sensing performance. At present, the processing of artificial diamond has not been fully optimised, and research and development towards the realisation of the `best¿ diamond sample for optical sensing is far from over. Specifically, the role of other defects in diamond and their effects on the photo-physical properties of the NV centres are not entirely understood. In this thesis, I will discuss the potential benefits of a novel processing technique to create ensembles of NV centres, and the importance that surrounding nitrogen defects has on the achievable magnetic field sensitivity. Additionally, I will show both theoretical and experimental investigations of the NV centres photo-physical processes, with focus on magnetic field sensing. I will initially explore a protocol for microwave-free magnetometry. This protocol predicts a theoretical magnetic field sensitivity <10µT/√Hz in the range 0.3 - 30mT and I will demonstrate it experimentally with a maximum sensitivity of 3.6mT/Hz. Following, I will focus on exploring techniques to increase the magnetic field sensitivity by improving the material properties of the diamond samples. I will demonstrate that the simultaneous electron irradiation and annealing improves the creation efficiency of an ensemble of NV centres by up to 117%. Finally, I will investigate how substitutional nitrogen defects in the surrounding lattice affects the charge state of the NV centre, its emission intensity, its lifetime and its magnetic field sensitivity. I will study a sample characterised by multiple regions across its volume, with nitrogen concentration changing between 10ppm and 100ppm in each region. There si an optimal region with ~ 40ppm of substitutional nitrogen which demonstrates the highest fluorescence emission, mainly from the negatively-charged NV centre, and the highest magnetic field sensitivity of 1.6 ± 0.2µT/√Hz. However, both the regions with lower and higher substitutional nitrogen concentration than the optimal region show lower emission intensity and worse magnetic field sensitivity. Following is a summary of the content in each chapter: Chapter 1 will present an introduction to the diamond material and the classification of artificial diamond samples. It will introduce the NV centre, its fluorescence properties and the process to create NV centres in diamond. The chapter will also introduce the concepts around optical magnetometry and the working principle that allows the NV centre to sense magnetic fields as well as other external quantities, such as temperature or pressure. Finally, it will include a brief overview of the defects that are found in artificial diamond or are created during the sample processing. Chapter 2 will describe the working principle of the instruments utilised in this work. I will list the details of each instrument and describe the methods used for the analysis of the data. Chapter 3 will introduce the background of modelling the fluorescence emission from NV centres. I will discuss the implementation of a computational model based on the Lindblad master equation to simulate the photo-physical dynamics of the NV centre. I will demonstrate the successful simulation of the saturation emission, fluorescence lifetime and optically detected magnetic resonance using the theoretical model. Finally, I will explore the theoretically predicted sensitivity of microwave-free magnetometry, based on the NV centre emission intensity change under an external magnetic field. Chapter 4 will demonstrate experimentally the microwave-free magnetometry technique. In relation to the study of microwave-free magnetometry, this chapter will explore an unexpected increase in emission intensity at high magnetic fields > 100mT. Combining the experimental observations and the theoretical simulation developed in the previous chapter, I will identify and discuss a phenomenological decrease in the NV centre transition rate from the triplet state to the singlet state. The chapter will conclude comparing the experimental and theoretical sensitivities associated with the microwave-free magnetometry technique. Chapter 5 will show the characterisation of a diamond sample at each step of the process to create NV centres. I will study the electron irradiation followed by separate annealing on a high-pressure high-temperature diamond sample. I will then characterise the sample employing visible and infrared absorption spectroscopy, as well as measure the fluorescence spectra and lifetime of the defects identified at each step. Chapter 6 will examine an alternative method to create NV centres in diamond. I will compare diamond samples irradiated and annealed separately with samples simultaneously irradiated and annealed (referred to as 'annealing in situ'). To compare the two processes, I will estimate the concentration of nitrogen defects and NV centres and calculate their N-to-NV conversion efficiency. Chapter 7 will discuss the effects of substitutional nitrogen on the properties of the NV centres in diamond. For this discussion, I will use a single-crystal diamond that shows the presence of 4 growth sectors. Each growth sector is characterised by a different nitrogen concentration, as I will demonstrate at the beginning of the chapter. I will focus on 4 main properties affected by the concentration of nitrogen in the different sectors: the balance between the charge states of the NV centre, the overall fluorescence intensity from each sector, the fluorescence lifetime and its relation to non-radiative processes, and the magnetic field sensitivity obtained with the optically detected magnetic resonance technique. Chapter 8 will gather the results and conclusions of the entire body of work. It will also discuss future avenues of research in the topic of diamond processing and characterisations, to improve the existing optical sensing applications.
This thesis investigates the use of the Nitrogen Vacancy (NV) centre in diamond as a novel sensor for magnetic resonance spectroscopy on the nanoscale. The need for novel nanoscale sensors of nuclear spins, for the application of nuclear magnetic resonance (NMR), and electron spins, for the application electron paramagnetic resonance (EPR), has been well established in recent decades. The nanoscale resolution, magnetic sensitivity, room temperature operation and optical initialisation and readout of the NV centre has led to it being of intense interest for this purpose. The biological compatibility of diamond strengthens the utility of the NV centre for interesting EPR and NMR applications. Existing techniques for EPR and NMR with the NV centre have focused on dynamically controlling the NV spin, and at times the environmental target spin, in order to match the frequency selectivity of the NV centre to the environmental spin species. However this introduces both physical and technical complexities on the measurement which can limit the applicability to certain, highly interesting applications. While microwave control of the NV centre looks a promising technology in the highly controlled lab environment for targetting applications such as protein structure determination, the requirement for control of both the static magnetic field and the strength of the microwave driving field are significant difficulties for more complex environments, such as potential in-vitro or in-vivo applications. This thesis is a detailed investigation of a new method of nanoscale EPR and NMR with the NV centre where we apply a precise static magnetic field to tune the NV into resonance with the environmental spin species. We can then measure this resonance via the reduced axial relaxation time, T1. We investigate the theoretical possibility and then conduct an experimental demonstration of both EPR and NMR in this way at the nanoscale with a single NV centre. Initially, in Chapter 2, we consider the theoretical application of T1 spectroscopy both to a classical noise signal and also, with a fully quantum treatment, to a single environmental spin. In addition, we detail the experimental setup used subsequently for implementing T1 spectroscopy. As an initial investigation, in Chapter 3, we map the spectrum of the substitutional Nitrogen defect (P1 centre) within diamond and compare this method to the current state-of-the-art techniques for nanoscale EPR with the NV centre. Furthermore we map the nuclear transitions of the P1 centres and demonstrate how the nuclear spin signal is enhanced by the strongly interacting electron spin of the P1 centre, thus providing a method for hyperfine-assisted NMR. After demonstrating our technique on an electronic spin system within the diamond lattice, we look to extend the technique to general nuclear spins external to the diamond surface in Chapter 4. This entails an extensive investigation of the NV centre's behaviour near the ground state level anticrossing (GSLAC) during which we demonstrate all-optical nanoscale AC magnetometry down to sub MHz level. Subsequently, we are able to demonstrate all-optical nanoscale NMR on proton spins external to the diamond surface and show that this technique achieves similar sensitivity to current techniques while removing the requirement for complex microwave pulsing of the NV centre. Finally, in Chapter 5, we look at how the ability to directly tune the NV into resonance with environmental spins allows for hyperpolarisation of the surrounding spin bath. Via the same mechanism used for the magnetic resonance spectroscopy studies, we show that the 13C nuclear spins within the diamond lattice can be polarised with high eficiency via this direct crossrelaxation. This work shows that coupling the NV centre to environmental spins simply via a static magnetic field is possible, opening up a new avenue for future sensing with the Nitrogen-Vacancy centre in diamond.
For quantum sensing, it is vital to develop an efficient technique for determining the quantum state of the sensor. We optimize the weighting of the photoluminescence intensity for readout of the spin state of the nitrogen-vacancy (NV) center in diamond. We find that adopting a physical model that considers the optical transitions and relaxations of the NV center allows for an efficient readout. Our method improves the signal-to-noise ratio of the readout by 5.4% in a short time of 3 s, while the existing methods typically require 1 min of integration time. We also show that our technique enhances the readout of the nuclear spin memory. The demonstrated way is helpful for a wide range of measurements, from a few minutes to several days.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( [ N s 0 ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with [ N s 0 ] ∼ 1–10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- [ N s 0 ] ( ∼ 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- [ N s 0 ] and previously studied higher- [ N s 0 ] ( ∼ 14 ppm) NV-diamond sensors. We show that low- [ N s 0 ] diamond can outperform higher- [ N s 0 ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.
Nitrogen vacancy centers in diamond are among the leading solid state quantum platforms, offering exceptional spatial resolution and sensitivity for applications such as magnetic field sensing, thermometry, and bioimaging. However, in high background environments,such as those encountered in in vitro diagnostics, the performance of NV based sensors can be compromised by strong background fluorescence, particularly from substrates such as nitrocellulose. In this work, we analytically and experimentally investigate the use of pulsed laser excitation combined with time gating techniques to suppress background fluorescence and enhance the signal to noise ratio in NV based quantum sensing, with an emphasis on spin enhanced biosensing. Through experimental studies using mixed ensembles of silicon vacancy and NV centers in bulk diamond, as well as fluorescent nanodiamonds on NC substrates, we demonstrate significant improvements in NV spin resonance visibility, demonstrated by an increase of the SNR by up to 4x, and a resulting measurement time reduction by 16x. The presented technique and results here can help significantly increase the readout efficiency and speed in future applications of NV centers in high background environments, such as in IVD, where the NV centers are used as a fluorescent label for biomolecules.