This thesis investigates the use of the Nitrogen Vacancy (NV) centre in diamond as a novel sensor for magnetic resonance spectroscopy on the nanoscale. The need for novel nanoscale sensors of nuclear spins, for the application of nuclear magnetic resonance (NMR), and electron spins, for the application electron paramagnetic resonance (EPR), has been well established in recent decades. The nanoscale resolution, magnetic sensitivity, room temperature operation and optical initialisation and readout of the NV centre has led to it being of intense interest for this purpose. The biological compatibility of diamond strengthens the utility of the NV centre for interesting EPR and NMR applications. Existing techniques for EPR and NMR with the NV centre have focused on dynamically controlling the NV spin, and at times the environmental target spin, in order to match the frequency selectivity of the NV centre to the environmental spin species. However this introduces both physical and technical complexities on the measurement which can limit the applicability to certain, highly interesting applications. While microwave control of the NV centre looks a promising technology in the highly controlled lab environment for targetting applications such as protein structure determination, the requirement for control of both the static magnetic field and the strength of the microwave driving field are significant difficulties for more complex environments, such as potential in-vitro or in-vivo applications. This thesis is a detailed investigation of a new method of nanoscale EPR and NMR with the NV centre where we apply a precise static magnetic field to tune the NV into resonance with the environmental spin species. We can then measure this resonance via the reduced axial relaxation time, T1. We investigate the theoretical possibility and then conduct an experimental demonstration of both EPR and NMR in this way at the nanoscale with a single NV centre. Initially, in Chapter 2, we consider the theoretical application of T1 spectroscopy both to a classical noise signal and also, with a fully quantum treatment, to a single environmental spin. In addition, we detail the experimental setup used subsequently for implementing T1 spectroscopy. As an initial investigation, in Chapter 3, we map the spectrum of the substitutional Nitrogen defect (P1 centre) within diamond and compare this method to the current state-of-the-art techniques for nanoscale EPR with the NV centre. Furthermore we map the nuclear transitions of the P1 centres and demonstrate how the nuclear spin signal is enhanced by the strongly interacting electron spin of the P1 centre, thus providing a method for hyperfine-assisted NMR. After demonstrating our technique on an electronic spin system within the diamond lattice, we look to extend the technique to general nuclear spins external to the diamond surface in Chapter 4. This entails an extensive investigation of the NV centre's behaviour near the ground state level anticrossing (GSLAC) during which we demonstrate all-optical nanoscale AC magnetometry down to sub MHz level. Subsequently, we are able to demonstrate all-optical nanoscale NMR on proton spins external to the diamond surface and show that this technique achieves similar sensitivity to current techniques while removing the requirement for complex microwave pulsing of the NV centre. Finally, in Chapter 5, we look at how the ability to directly tune the NV into resonance with environmental spins allows for hyperpolarisation of the surrounding spin bath. Via the same mechanism used for the magnetic resonance spectroscopy studies, we show that the 13C nuclear spins within the diamond lattice can be polarised with high eficiency via this direct crossrelaxation. This work shows that coupling the NV centre to environmental spins simply via a static magnetic field is possible, opening up a new avenue for future sensing with the Nitrogen-Vacancy centre in diamond.
This thesis investigates the use of the Nitrogen Vacancy (NV) centre in diamond as a novel sensor for magnetic resonance spectroscopy on the nanoscale. The need for novel nanoscale sensors of nuclear spins, for the application of nuclear magnetic resonance (NMR), and electron spins, for the application electron paramagnetic resonance (EPR), has been well established in recent decades. The nanoscale resolution, magnetic sensitivity, room temperature operation and optical initialisation and readout of the NV centre has led to it being of intense interest for this purpose. The biological compatibility of diamond strengthens the utility of the NV centre for interesting EPR and NMR applications. Existing techniques for EPR and NMR with the NV centre have focused on dynamically controlling the NV spin, and at times the environmental target spin, in order to match the frequency selectivity of the NV centre to the environmental spin species. However this introduces both physical and technical complexities on the measurement which can limit the applicability to certain, highly interesting applications. While microwave control of the NV centre looks a promising technology in the highly controlled lab environment for targetting applications such as protein structure determination, the requirement for control of both the static magnetic field and the strength of the microwave driving field are significant difficulties for more complex environments, such as potential in-vitro or in-vivo applications. This thesis is a detailed investigation of a new method of nanoscale EPR and NMR with the NV centre where we apply a precise static magnetic field to tune the NV into resonance with the environmental spin species. We can then measure this resonance via the reduced axial relaxation time, T1. We investigate the theoretical possibility and then conduct an experimental demonstration of both EPR and NMR in this way at the nanoscale with a single NV centre. Initially, in Chapter 2, we consider the theoretical application of T1 spectroscopy both to a classical noise signal and also, with a fully quantum treatment, to a single environmental spin. In addition, we detail the experimental setup used subsequently for implementing T1 spectroscopy. As an initial investigation, in Chapter 3, we map the spectrum of the substitutional Nitrogen defect (P1 centre) within diamond and compare this method to the current state-of-the-art techniques for nanoscale EPR with the NV centre. Furthermore we map the nuclear transitions of the P1 centres and demonstrate how the nuclear spin signal is enhanced by the strongly interacting electron spin of the P1 centre, thus providing a method for hyperfine-assisted NMR. After demonstrating our technique on an electronic spin system within the diamond lattice, we look to extend the technique to general nuclear spins external to the diamond surface in Chapter 4. This entails an extensive investigation of the NV centre's behaviour near the ground state level anticrossing (GSLAC) during which we demonstrate all-optical nanoscale AC magnetometry down to sub MHz level. Subsequently, we are able to demonstrate all-optical nanoscale NMR on proton spins external to the diamond surface and show that this technique achieves similar sensitivity to current techniques while removing the requirement for complex microwave pulsing of the NV centre. Finally, in Chapter 5, we look at how the ability to directly tune the NV into resonance with environmental spins allows for hyperpolarisation of the surrounding spin bath. Via the same mechanism used for the magnetic resonance spectroscopy studies, we show that the 13C nuclear spins within the diamond lattice can be polarised with high eficiency via this direct crossrelaxation. This work shows that coupling the NV centre to environmental spins simply via a static magnetic field is possible, opening up a new avenue for future sensing with the Nitrogen-Vacancy centre in diamond.
Quantum technologies are expected to significantly change our world in the next decades and the possible applications are diverse – ranging from quantum computation and encryption to metrology with unprecedented sensitivity. This thesis focuses on quantum sensing and imaging based on single nitrogen-vacancy (NV) centres in diamond to measure magnetic fields. Its electronic spin qualifies this point defect as a highly sensitive quantum sensor and its atomic size offers nanoscale spatial resolution. The simple optical initialisation and readout, together with the relatively long coherence time at ambient conditions, make NV centres promising candidates for biological applications and in particular for nuclear magnetic resonance (NMR) on the nanoscale. Recording the spectral information on the nanoscale allows to determine the structure of single or just a few molecules. However, the current main problems and challenges include insufficient spectral resolution, artificial signals and overall poor performance. In this thesis new spectroscopic techniques which tackle these issues are presented. First, it is shown that by randomisation of control pulse phases spurious harmonic signals can be suppressed, which otherwise complicate spectrum interpretation and can lead to false signal identification. At the same time the effects of pulse imperfections are mitigated. Furthermore, a protocol allowing to measure with a coherence independent spectral resolution is presented. It is demonstrated that linewidths below 1mHz are possible, which is an improvement of more than seven orders of magnitude compared to traditional methods. Due to its simple implementation, the protocol is relevant for many applications. Initially developed to measure signals oscillating up to several megahertz, it is further shown that modifications allow to extend the frequency range into the gigahertz domain. Finally, quantum frequency discrimination with the task to differentiate between two frequency distributions using a quantum sensor is analysed. An optimised protocol is introduced and the influences of different readout strategies are discussed with respect to the probability to make an incorrect decision. These findings are useful for diagnostic tests in NMR.
Devices that detect and spatially image magnetic fields are important in many areas of study including chemistry, electronics, materials science and biology. By extending the boundaries of what is currently achievable we may begin to explore areas previously inaccessible to science, such as wide-field imaging of neuron signaling or structural determination of single molecules. Here we present experimental progress towards the development of a nanoscale magnetic sensor operating under ambient conditions using the nitrogen-vacancy (NV) centre in diamond. This thesis describes the construction of a lab-built, confocal microscope capable of detecting single NV centres, with additional microwave control for coherent manipulation of the NV spin. The feasibility of using NV-diamond for real-time detection of the action potential generated by a neuron, and with high spatial resolution is experimentally demonstrated. The quantum coherence of single NV spins is monitored in various chemical solutions, and detection of nanoscale magnetic environments external to the diamond are demonstrated. This work sets the experimental foundation for using manufactured single quantum systems as sensitive probes of external chemical environments. In addition, the first measurements of single quantum coherent spins inside living cells are performed with NV centres in nanodiamonds. These studies on NV centres inside living cells demonstrate their promise as magnetic sensors for biology. Furthermore, alternative quantum sensing technologies emerge including rotational tracking of nanodiamonds and enhanced identification of fluorescent nanoparticles.
Quantum sensing using nitrogen-vacancy (NV) centers in diamond has emerged as a powerful platform for detecting ultra-low magnetic fields under ambient conditions. Owing to their long spin coherence times, optical addressability, and compatibility with aqueous environments, it has found widespread applications in biosensing and bio-imaging. This review presents the fundamental principles and recent advances in NV-based quantum magnetometry for biosensing applications, with a particular focus on measurements in aqueous medium and at cellular and molecular length scales. We discuss the underlying spin physics of NV centers and highlight two primary detection modalities: optically detected magnetic resonance (ODMR) and T1 relaxometry-based sensing and how these approaches aids in the detection of both static magnetic fields and dynamic magnetic noise arising from biological processes. The review explores key application areas, including nanoscale nuclear magnetic resonance (NMR), monitoring of neural activity, detection of abnormal or rogue cells using NV-based platforms etc. In addition, strategies for enhancing sensitivity, such as surface functionalization of nanodiamonds, femtosecond (fs) laser-written photonic structures, and integration with microfluidic and lab-on-chip systems have also been discussed in depth. We also address the critical challenges, including surface-induced decoherence, charge-state instability, and signal-to-noise limitations in biofluids associated with NV-based biosensing applications. Finally, we outline future prospects, highlighting how NV-based magnetic biosensing provides a promising pathway for translating quantum sensing technologies into practical biomedical applications.
The fluorescence of the nitrogen-vacancy (NV) centre in artificial diamond has been widely studied for applications such as quantum communication protocols, quantum computation, fluorescence-based biolabelling, and optical sensing. Optical sensing by itself encompasses a wide range of possible applications: from magnetic and electric field sensing to temperature sensing and enabling, for example, the detection of paramagnetic ions and the identification of molecules by nuclear magnetic resonance. Compared to many other systems capable of optical sensing, the NV centre works at room temperature, and its spin-dependent fluorescence emission is the key property to achieve a high sensitivity to the surrounding environment. Additionally, the NV centre emission is highly photostable, has a relatively short lifetime (~ 12ns) and spans a broad wavelength range, from the red to the near-infrared region of the electromagnetic spectrum (600 - 800nm). While the common denominator of all mentioned applications is the NV centre, the properties of the artificial diamond surrounding the NV centre have a significant impact on its sensing performance. At present, the processing of artificial diamond has not been fully optimised, and research and development towards the realisation of the `best¿ diamond sample for optical sensing is far from over. Specifically, the role of other defects in diamond and their effects on the photo-physical properties of the NV centres are not entirely understood. In this thesis, I will discuss the potential benefits of a novel processing technique to create ensembles of NV centres, and the importance that surrounding nitrogen defects has on the achievable magnetic field sensitivity. Additionally, I will show both theoretical and experimental investigations of the NV centres photo-physical processes, with focus on magnetic field sensing. I will initially explore a protocol for microwave-free magnetometry. This protocol predicts a theoretical magnetic field sensitivity <10µT/√Hz in the range 0.3 - 30mT and I will demonstrate it experimentally with a maximum sensitivity of 3.6mT/Hz. Following, I will focus on exploring techniques to increase the magnetic field sensitivity by improving the material properties of the diamond samples. I will demonstrate that the simultaneous electron irradiation and annealing improves the creation efficiency of an ensemble of NV centres by up to 117%. Finally, I will investigate how substitutional nitrogen defects in the surrounding lattice affects the charge state of the NV centre, its emission intensity, its lifetime and its magnetic field sensitivity. I will study a sample characterised by multiple regions across its volume, with nitrogen concentration changing between 10ppm and 100ppm in each region. There si an optimal region with ~ 40ppm of substitutional nitrogen which demonstrates the highest fluorescence emission, mainly from the negatively-charged NV centre, and the highest magnetic field sensitivity of 1.6 ± 0.2µT/√Hz. However, both the regions with lower and higher substitutional nitrogen concentration than the optimal region show lower emission intensity and worse magnetic field sensitivity. Following is a summary of the content in each chapter: Chapter 1 will present an introduction to the diamond material and the classification of artificial diamond samples. It will introduce the NV centre, its fluorescence properties and the process to create NV centres in diamond. The chapter will also introduce the concepts around optical magnetometry and the working principle that allows the NV centre to sense magnetic fields as well as other external quantities, such as temperature or pressure. Finally, it will include a brief overview of the defects that are found in artificial diamond or are created during the sample processing. Chapter 2 will describe the working principle of the instruments utilised in this work. I will list the details of each instrument and describe the methods used for the analysis of the data. Chapter 3 will introduce the background of modelling the fluorescence emission from NV centres. I will discuss the implementation of a computational model based on the Lindblad master equation to simulate the photo-physical dynamics of the NV centre. I will demonstrate the successful simulation of the saturation emission, fluorescence lifetime and optically detected magnetic resonance using the theoretical model. Finally, I will explore the theoretically predicted sensitivity of microwave-free magnetometry, based on the NV centre emission intensity change under an external magnetic field. Chapter 4 will demonstrate experimentally the microwave-free magnetometry technique. In relation to the study of microwave-free magnetometry, this chapter will explore an unexpected increase in emission intensity at high magnetic fields > 100mT. Combining the experimental observations and the theoretical simulation developed in the previous chapter, I will identify and discuss a phenomenological decrease in the NV centre transition rate from the triplet state to the singlet state. The chapter will conclude comparing the experimental and theoretical sensitivities associated with the microwave-free magnetometry technique. Chapter 5 will show the characterisation of a diamond sample at each step of the process to create NV centres. I will study the electron irradiation followed by separate annealing on a high-pressure high-temperature diamond sample. I will then characterise the sample employing visible and infrared absorption spectroscopy, as well as measure the fluorescence spectra and lifetime of the defects identified at each step. Chapter 6 will examine an alternative method to create NV centres in diamond. I will compare diamond samples irradiated and annealed separately with samples simultaneously irradiated and annealed (referred to as 'annealing in situ'). To compare the two processes, I will estimate the concentration of nitrogen defects and NV centres and calculate their N-to-NV conversion efficiency. Chapter 7 will discuss the effects of substitutional nitrogen on the properties of the NV centres in diamond. For this discussion, I will use a single-crystal diamond that shows the presence of 4 growth sectors. Each growth sector is characterised by a different nitrogen concentration, as I will demonstrate at the beginning of the chapter. I will focus on 4 main properties affected by the concentration of nitrogen in the different sectors: the balance between the charge states of the NV centre, the overall fluorescence intensity from each sector, the fluorescence lifetime and its relation to non-radiative processes, and the magnetic field sensitivity obtained with the optically detected magnetic resonance technique. Chapter 8 will gather the results and conclusions of the entire body of work. It will also discuss future avenues of research in the topic of diamond processing and characterisations, to improve the existing optical sensing applications.
This thesis investigates the theoretical foundations, material properties, and experimental realization of quantum sensors based on the Nitrogen-Vacancy (NV) centers in diamond, a solid-state system that combines quantum coherence with room-temperature operability. The first chapter introduces the principles of quantum sensing, outlining the fundamental definitions, operating protocols, and physical processes underlying the quantum measurement paradigm. Emphasis is placed on the quantum sensing Hamiltonian and the distinction between various classes of quantum sensors. The second chapter focuses on diamond as a host material and on the NV center as a quantum defect. The electronic structure, optical transitions, and spin properties of the NV center are analyzed in detail. Several techniques of NV-based magnetometry are presented, including continuouswave and pulsed optically detected magnetic resonance (ODMR). The discussion also addresses coherence times (T1, T2, and T∗2 ) and methods of diamond synthesis together with NV-center generation through irradiation and annealing. Chapter three develops the physical theory describing the NV center. The Hamiltonian formalism includes spin-spin, hyperfine, and quadrupolar interactions, as well as couplings to external magnetic fields. The chapter further introduces the Bloch sphere representation, magnetic resonance phenomena, and models of lightmatter interaction, ranging from the semiclassical to the fully quantum Rabi framework. A seven-level rate-equation model is proposed to capture the spin dynamics and optical cycling processes of the NV center. The fourth chapter reports the experimental results. After describing materials and methods, several ODMR-based vector magnetometry experiments are presented, highlighting different spectral regimes and the dependence of resonance features on the external magnetic field geometry. Additional studies demonstrate temperature sensing and microwave-free magnetometry techniques for mapping magnetic field distributions. Sensitivity analysis and calibration procedures are also discussed.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.