Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Practical quantum computing: error reduction techniques from software to hardware

Adam C. Siegel

Published Jan 1, 2025• 0 citations
Publisher

Abstract

This thesis presents multiple advances in the construction of noise-resistant quantum computers. In order to bridge the gap between abstract theory and practical experiments, my research encompasses a wide range of subfields within quantum computing, including error correction, silicon spin qubit physics and error mitigation. Firstly, I demonstrate that large-scale defects affecting entire regions of an error correcting code, such as cosmic rays or manufacturing defects, do not necessarily constitute a fundamental obstacle. Conversely, bespoke protocols that employ code deformation can be utilised to mitigate their impact, at a moderate resource overhead. Secondly, I investigate the feasibility of building a fault-tolerant silicon spin qubit quantum computer in the near term. I demonstrate that arranging the qubits in a 2×N array represents an effective methodology for the construction of error correcting codes, provided that the qubits can be shuttled with high fidelity. This expected characteristic of silicon spins can thus be utilised to circumvent the construction of complex dense 2D grids of qubits. Subsequently, I build upon the existing literature on the implementation of low-noise gates in silicon spin qubits, at the physical level this time. Specifically, I design a protocol for the individual control of silicon spin qubits, without the need for local magnetic fields targeting every qubit in the device. This simplification enables efficient control of silicon spins, whose single-qubit addressability was an identified bottleneck. Finally, I complement the above research with an error mitigation scheme targeted at the evaluation of eigenvalues with an early-fault-tolerant quantum computers. This scheme promises to alleviate the stringent resource costs of error correction, thereby paving the way for fault-tolerance in a nearer future.

DOI
10.5287/ora-mn5z7xn88

Related papers

Realistic Cross-Stack Architectural Design for Scalable Fault-Tolerant Quantum Computation

Jason D. Chadwick

The transition from noisy intermediate-scale quantum (NISQ) processors to large-scale fault-tolerant machines requires more than incremental improvements in physical qubit fidelity. While advances in quantum error correction (QEC) theory continue to lower the theoretical overhead of quantum computing, much of this research remains abstracted from the physical realities of qubit implementations. This disconnect often results in hardware-agnostic designs that are inefficient or impractical to build. In this dissertation, I identify three primary gaps between theoretical QEC research and practical hardware: (1) the high levels of noise and temporal instability in experimental devices that impede scalable QEC; (2) the prohibitively large qubit and time costs of useful algorithms, driven largely by the limitations of the standard surface code; and (3) the failure of current resource estimates to account for hardware-level constraints, such as limited connectivity and the complexity of implementing non-local operations. To bridge these gaps, I propose a holistic, cross-stack approach where the error correction protocols and the physical hardware are designed in concert. By developing realistic device models and hardware-aware solutions at the lowest levels of the software stack, we can accelerate the path toward functional fault-tolerance. I present my work across three research thrusts: first, leveraging codesign to mitigate hardware-specific noise and reduce physical error rates; second, developing software tools for fault-tolerant quantum computers to reduce the space-time overhead of the QEC layer; and third, proposing two novel hardware-aware QEC architectures that provide practical, high-performance routes to scalable quantum computation.

•Jun 1, 2026•0 citations

Architectures for fault-tolerant quantum computation

Joe O’Gorman

Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.

•Jan 1, 2017•0 citations

New pathways to universal quantum logic in the early era of fault tolerance

Friederike Butt

Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.

•Jan 1, 2026•0 citations

New methods in quantum error correction and fault-tolerant quantum computing

Christopher Chamberland

Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.

•Oct 22, 2018•0 citations

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Fault-tolerant quantum computation

Christophe Vuillot

Quantumcomputation is the modern version of Schrödinger’s cat experiment. It is backed up in principle by the theory and thinking about it can make people equally uncomfortable and excited. Besides, its practical realization seems so extremely challenging that some people even doubt it is possible. On the other hand, we are nowadays much closer to realizing quantum computation and in addition, it has much more implications than Schrödinger’s original cat experiment. One of the major difficulties in realizing quantum computation is the inevitable presence of noise in realistic quantum devices which makes the direct realization of quantum computers impossible. In order to protect quantum information and quantum processes against noise, quantum error correction and fault-tolerance have been devised. Although the gap between experiments and the requirements of fault-tolerance is still daunting, the field of quantum error correction and fault-tolerance extends and influences architectural decisions from the hardware to the ideal quantum programs that we want to run. That is why it has the potential to make or break the practicality of quantum computation and a lot of research effort goes into this field. In this thesis we investigate and improve several aspects of fault-tolerant schemes and quantum error correction. We implement an experiment which validates on a small device the usefulness of fault-tolerance for quantum computation. We investigate the advantages of harnessing quantum continuous degrees of freedom present in the lab to protect discrete quantum information in a scalable way. We establish a framework to analyze the fault-tolerant properties of code deformation techniques which are versatile techniques to process quantum information protected by an error correcting code. We also present some novel code deformation techniques with the potential to increase reliability. Finally we define a new class of quantum error correcting codes, quantum pin codes, with built in capabilities for fault-tolerant quantum gates. We give some practical constructions and show some protocols with interesting parameters. The roads towards universal and fault-tolerant quantum computation are still steep but research efforts are pushing in the right directions.

•Dec 16, 2019•2 citations
This thesis presents multiple advances in the construction of noise-resistant quantum computers. In order to bridge the gap between abstract theory and practical experiments, my research encompasses a wide range of subfields within quantum computing, including error correction, silicon spin qubit physics and error mitigation. Firstly, I demonstrate that large-scale defects affecting entire regions of an error correcting code, such as cosmic rays or manufacturing defects, do not necessarily constitute a fundamental obstacle. Conversely, bespoke protocols that employ code deformation can be utilised to mitigate their impact, at a moderate resource overhead. Secondly, I investigate the feasibility of building a fault-tolerant silicon spin qubit quantum computer in the near term. I demonstrate that arranging the qubits in a 2×N array represents an effective methodology for the construction of error correcting codes, provided that the qubits can be shuttled with high fidelity. This expected characteristic of silicon spins can thus be utilised to circumvent the construction of complex dense 2D grids of qubits. Subsequently, I build upon the existing literature on the implementation of low-noise gates in silicon spin qubits, at the physical level this time. Specifically, I design a protocol for the individual control of silicon spin qubits, without the need for local magnetic fields targeting every qubit in the device. This simplification enables efficient control of silicon spins, whose single-qubit addressability was an identified bottleneck. Finally, I complement the above research with an error mitigation scheme targeted at the evaluation of eigenvalues with an early-fault-tolerant quantum computers. This scheme promises to alleviate the stringent resource costs of error correction, thereby paving the way for fault-tolerance in a nearer future.
The transition from noisy intermediate-scale quantum (NISQ) processors to large-scale fault-tolerant machines requires more than incremental improvements in physical qubit fidelity. While advances in quantum error correction (QEC) theory continue to lower the theoretical overhead of quantum computing, much of this research remains abstracted from the physical realities of qubit implementations. This disconnect often results in hardware-agnostic designs that are inefficient or impractical to build. In this dissertation, I identify three primary gaps between theoretical QEC research and practical hardware: (1) the high levels of noise and temporal instability in experimental devices that impede scalable QEC; (2) the prohibitively large qubit and time costs of useful algorithms, driven largely by the limitations of the standard surface code; and (3) the failure of current resource estimates to account for hardware-level constraints, such as limited connectivity and the complexity of implementing non-local operations. To bridge these gaps, I propose a holistic, cross-stack approach where the error correction protocols and the physical hardware are designed in concert. By developing realistic device models and hardware-aware solutions at the lowest levels of the software stack, we can accelerate the path toward functional fault-tolerance. I present my work across three research thrusts: first, leveraging codesign to mitigate hardware-specific noise and reduce physical error rates; second, developing software tools for fault-tolerant quantum computers to reduce the space-time overhead of the QEC layer; and third, proposing two novel hardware-aware QEC architectures that provide practical, high-performance routes to scalable quantum computation.
Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantumcomputation is the modern version of Schrödinger’s cat experiment. It is backed up in principle by the theory and thinking about it can make people equally uncomfortable and excited. Besides, its practical realization seems so extremely challenging that some people even doubt it is possible. On the other hand, we are nowadays much closer to realizing quantum computation and in addition, it has much more implications than Schrödinger’s original cat experiment. One of the major difficulties in realizing quantum computation is the inevitable presence of noise in realistic quantum devices which makes the direct realization of quantum computers impossible. In order to protect quantum information and quantum processes against noise, quantum error correction and fault-tolerance have been devised. Although the gap between experiments and the requirements of fault-tolerance is still daunting, the field of quantum error correction and fault-tolerance extends and influences architectural decisions from the hardware to the ideal quantum programs that we want to run. That is why it has the potential to make or break the practicality of quantum computation and a lot of research effort goes into this field. In this thesis we investigate and improve several aspects of fault-tolerant schemes and quantum error correction. We implement an experiment which validates on a small device the usefulness of fault-tolerance for quantum computation. We investigate the advantages of harnessing quantum continuous degrees of freedom present in the lab to protect discrete quantum information in a scalable way. We establish a framework to analyze the fault-tolerant properties of code deformation techniques which are versatile techniques to process quantum information protected by an error correcting code. We also present some novel code deformation techniques with the potential to increase reliability. Finally we define a new class of quantum error correcting codes, quantum pin codes, with built in capabilities for fault-tolerant quantum gates. We give some practical constructions and show some protocols with interesting parameters. The roads towards universal and fault-tolerant quantum computation are still steep but research efforts are pushing in the right directions.