Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Reliable execution of large-scale quantum algorithms requires robust underlying operations, which is addressed by quantum error correction (QEC). Most modern QEC protocols rely on measurements and feed-forward operations, which are experimentally demanding and often prone to high error rates. Additionally, no single-error-correcting code intrinsically supports the full set of logical operations required for universal quantum computing. In this work, we present a complete toolbox for fault-tolerant universal quantum computing without measurements during algorithm execution by combining the strategies of code switching and concatenation. We develop fault-tolerant, measurement-free protocols to transfer encoded information between 2D and 3D color codes that offer complementary and, in combination, universal sets of robust logical gates. Moreover, we extend the scheme to higher-distance codes by concatenating the 2D color code and integrating code switching for operations lacking a natively fault-tolerant implementation. Our measurement-free approach thereby provides a practical and scalable pathway for universal quantum computing on state-of-the-art quantum processors.
The ability to perform quantum error correction (QEC) and robust gate operations on encoded qubits opens the door to demonstrations of quantum algorithms. Contemporary QEC schemes typically require mid-circuit measurements with feed-forward control, which are challenging for qubit control, often slow, and susceptible to relatively high error rates. In this work, we propose and experimentally demonstrate a universal toolbox of fault-tolerant logical operations on error-detecting codes without mid-circuit measurements on a trapped-ion quantum processor. We present modular logical state teleportation between two four-qubit error-detecting codes without measurements during algorithm execution. Moreover, we realize a fault-tolerant universal gate set on an eight-qubit error-detecting code hosting three logical qubits, based on state injection, which can be executed by coherent gate operations only. We apply this toolbox to experimentally realize Grover's quantum search algorithm fault-tolerantly on three logical qubits encoded in eight physical qubits, with the implementation displaying clear identification of the desired solution states. Our work demonstrates the practical feasibility and provides first steps into the largely unexplored direction of measurement-free quantum computation.
Abstract The ability to perform quantum error correction (QEC) and robust gate operations on encoded qubits opens the door to demonstrations of quantum algorithms. Contemporary QEC schemes typically require mid-circuit measurements with feed-forward control, which are challenging for qubit control, often slow, and susceptible to relatively high error rates. In this work, we propose and experimentally demonstrate a universal toolbox of fault-tolerant logical operations without mid-circuit measurements on a trapped-ion quantum processor. We present modular logical state teleportation between two four-qubit error-detecting codes without measurements during algorithm execution. Moreover, we realize a fault-tolerant universal gate set on an eight-qubit error-detecting code hosting three logical qubits, based on state injection, which can be executed by coherent gate operations only. We apply this toolbox to experimentally realize Grover's quantum search algorithm fault-tolerantly on three logical qubits encoded in eight physical qubits, with the implementation displaying clear identification of the desired solution states. Our work demonstrates the practical feasibility and provides first steps into the largely unexplored direction of measurement-free quantum computation.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.
Quantum error correction codes are essential for fault-tolerant quantum computing. They are a method of detecting and correcting errors in a quantum computer by encoding logical qubits across multiple physical qubits. Several prominent error correction codes have been developed and larger and more complex codes are being developed continuously. However, evaluating the fault-tolerance of these larger codes is becoming exponentially more complicated. While conventional methods of proving and evaluating the fault-tolerance of these circuits have worked thus far, they are soon to be obsolete. The aim of this thesis is to develop a framework that automatically evaluates the fault-tolerance of a quantum error correction circuit across different hardware architectures. The framework works as follows: it takes a noiseless quantum error correction code; injects hardware-realistic noise into it; and evaluates the fault-tolerance of the resulting noisy circuit by estimating its logical error rate through Monte Carlo sampling. For the injection of hardware-realistic noise, this thesis considers noise stemming from five different quantum computing hardware architectures: superconducting qubits, neutral atoms, trapped ions, photonic qubits, and spin qubits. The noise model was constructed by extracting single-qubit gate, two-qubit gate and measurement error fidelities from current experimental literature. The noise model and circuit generation is implemented in Python, circuit representation and noise injection is executed in Stim and decoding and estimating the logical error rate is achieved through PyMatching. The framework is evaluated on the repetition code, the surface code, and the color code; the logical error rate is estimated across all five hardware architectures under the noise model; and the results are discussed in the context of hardware compatibility for the given codes.