Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optimization of optical dipole trap loading for 87-Rb and light-shift tomography for trap characterization

Solé Cardona, Èlia

Published Sep 9, 2024• 0 citations
OpenAlex

Abstract

This project reports on loading 87-Rb in a red-detuned optical dipole trap formed by three 1560 nm crossed beams. The work describes the implementations made to the system for proper trap operation and the designed experimental sequence. The characteristics of the dipole potential are calculated to understand and optimize the trap loading process. The light-shift tomography technique is employed to map the trapping potential and to ensure the alignment of the trap beams. As a result, the experiment yielded 2 × 10^5 atoms in the optical dipole trap.

Related papers

Light-shift tomography in an optical-dipole trap for neutral atoms

Jean-Philippe Brantut, Jean‐François Clément, Martin Robert-De-Saint-Vincent +5 more

We report on light-shift tomography of a cloud of $^{87}\mathrm{Rb}$ atoms in a far-detuned optical-dipole trap at $1565\phantom{\rule{0.3em}{0ex}}\mathrm{nm}$. Our method is based on standard absorption imaging, but takes advantage of the strong light shift of the excited state of the imaging transition, which is due to a quasiresonance of the trapping laser with a higher excited level. We use this method to (i) map the equipotentials of a crossed optical-dipole trap and (ii) study the thermalization of an atomic cloud by following the evolution of the potential energy of atoms during the free-evaporation process.

arXiv:0807.3672•Physical Review A•Sep 25, 2008•42 citations

Tightly confined atoms in optical dipole traps

Matthias C. Schulz

This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.

•Jan 1, 2002•7 citations

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller +2 more

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited slate collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients, for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement or the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow n it. In this way we load 8 × 10 6 85 Rb atoms into a 1 mK deep optical dipole trap with a worst of 58 μm, which is 40% of the atoms initially trapped in the MOT.

WORLD SCIENTIFIC eBooks•Jan 1, 2008•0 citations

Optimization of a crossed optical dipole trap for loading and confining laser-cooled atoms

Guan‐Bo Liao, Keng-Shuo Wu, Chung-You Shih +4 more

We theoretically study the loading of cold atoms into a crossed optical dipole trap (ODT). We compared the loading efficiency dependent on the trap geometry for Nd:YAG and CO2 laser ODTs. By crossing two Nd:YAG laser beams at a small angle, such as 10°, we can shape the geometry of the effective potential in the intersection region and achieve comparable performance to that of a single-beam CO2 laser ODT. We also calculate the optimal experimental parameters for these two laser wavelengths for laser power per beam ranging from 5 W to 100 W. We further experimentally studied the loading of laser-cooled Rb87 atoms into a small-angle crossed Nd:YAG ODT and found that the experimental data agreed with the simulation results.

Journal of the Optical Society of America B•Mar 28, 2017•4 citations

Simultaneous loading of 39 K and Rb into a crossed dipole trap: Characterization and two-body losses

Carlos Renato Menegatti, Bruno Marangoni, Jonathan Tallant +1 more

In this work, a broadband 1071 nm crossed optical dipole trap was loaded simultaneously from a two-atomic-species K-Rb magneto-optical trap. The number of atoms loaded into the dipole trap, for both species, was characterized as a function of different laser parameters and loading procedures. The best observed loading procedure for K is explained by the ac Stark shift of the hyperfine states involved in the ${D}_{2}$ transition. For the optimum conditions, the dipole trap has about $3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ ${}^{39}$K atoms at an atomic density of $7\ifmmode\times\else\texttimes\fi{}{10}^{12}$ cm${}^{\ensuremath{-}3}$ and $2\ifmmode\times\else\texttimes\fi{}{10}^{6}$ Rb atoms at an atomic density of $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ cm${}^{\ensuremath{-}3}$, with temperatures of 22 and 10 $\ensuremath{\mu}$K, respectively. Finally, by studying the time evolution of both species trapped in the crossed optical dipole trap, we have observed a nonexponential decay associated with heteronuclear two-body losses. Such losses may be due to KRb photoassociation by the broadband 1071 nm laser.

Physical Review A•Aug 9, 2013•4 citations

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller +2 more

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.

Physical Review A•Jun 13, 2000•192 citations
This project reports on loading 87-Rb in a red-detuned optical dipole trap formed by three 1560 nm crossed beams. The work describes the implementations made to the system for proper trap operation and the designed experimental sequence. The characteristics of the dipole potential are calculated to understand and optimize the trap loading process. The light-shift tomography technique is employed to map the trapping potential and to ensure the alignment of the trap beams. As a result, the experiment yielded 2 × 10^5 atoms in the optical dipole trap.
We report on light-shift tomography of a cloud of 87Rb^{87}\mathrm{Rb}87Rb atoms in a far-detuned optical-dipole trap at 1565nm1565\phantom{\rule{0.3em}{0ex}}\mathrm{nm}1565nm. Our method is based on standard absorption imaging, but takes advantage of the strong light shift of the excited state of the imaging transition, which is due to a quasiresonance of the trapping laser with a higher excited level. We use this method to (i) map the equipotentials of a crossed optical-dipole trap and (ii) study the thermalization of an atomic cloud by following the evolution of the potential energy of atoms during the free-evaporation process.
This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited slate collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients, for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement or the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow n it. In this way we load 8 × 10 6 85 Rb atoms into a 1 mK deep optical dipole trap with a worst of 58 μm, which is 40% of the atoms initially trapped in the MOT.
We theoretically study the loading of cold atoms into a crossed optical dipole trap (ODT). We compared the loading efficiency dependent on the trap geometry for Nd:YAG and CO2 laser ODTs. By crossing two Nd:YAG laser beams at a small angle, such as 10°, we can shape the geometry of the effective potential in the intersection region and achieve comparable performance to that of a single-beam CO2 laser ODT. We also calculate the optimal experimental parameters for these two laser wavelengths for laser power per beam ranging from 5 W to 100 W. We further experimentally studied the loading of laser-cooled Rb87 atoms into a small-angle crossed Nd:YAG ODT and found that the experimental data agreed with the simulation results.
In this work, a broadband 1071 nm crossed optical dipole trap was loaded simultaneously from a two-atomic-species K-Rb magneto-optical trap. The number of atoms loaded into the dipole trap, for both species, was characterized as a function of different laser parameters and loading procedures. The best observed loading procedure for K is explained by the ac Stark shift of the hyperfine states involved in the D2{D}_{2}D2​ transition. For the optimum conditions, the dipole trap has about $3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ 39{}^{39}39K atoms at an atomic density of $7\ifmmode\times\else\texttimes\fi{}{10}^{12}$ cm${}^{\ensuremath{-}3}$ and $2\ifmmode\times\else\texttimes\fi{}{10}^{6}$ Rb atoms at an atomic density of $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ cm${}^{\ensuremath{-}3}$, with temperatures of 22 and 10 $\ensuremath{\mu}$K, respectively. Finally, by studying the time evolution of both species trapped in the crossed optical dipole trap, we have observed a nonexponential decay associated with heteronuclear two-body losses. Such losses may be due to KRb photoassociation by the broadband 1071 nm laser.
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.