Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

WORLD SCIENTIFIC eBooks

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller, T. E. Chupp, Carl Wieman

Published Jan 1, 2008• 0 citations
Publisher

Abstract

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited slate collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients, for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement or the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow n it. In this way we load 8 × 10 6 85 Rb atoms into a 1 mK deep optical dipole trap with a worst of 58 μm, which is 40% of the atoms initially trapped in the MOT.

DOI
10.1142/9789812813787_0060

Related papers

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller +2 more

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.

Physical Review A•Jun 13, 2000•192 citations

Loading characteristics of a microscopic optical dipole trap

P. Kulatunga, Tyler Blum, D. Olek

We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing $\approx 5\times 10^{6}$ atoms. We determine the loading parameters that maximize the trapped atom number for a trap of waist 5 μm with trap depths ranging from 3.5 mK to 10 mK. We determine the optimal trap loading conditions and the loading rates, loss coefficients and temperature of the trapped atoms under these conditions. We show that it is possible to load a few hundred to thousand atoms in dipole traps of depth 3.5 mK to 8.5 mK under the optimal loading conditions.

arXiv:1009.2544•Sep 14, 2010•3 citations

Loading a39K crossed optical dipole trap from a magneto-optical trap

Bruno Marangoni, Carlos Renato Menegatti, Luís Gustavo Marcassa

In this work, we have applied sub-Doppler laser cooling to a 39 K magneto-optical trap in order to load a 1071 nm crossed optical dipole trap. The number of atoms loaded into the dipole trap was characterized as a function of the frequency and intensity of the cooling and repump laser beams. For the optimum conditions, the dipole trap has about 2 × 10 6 atoms at an atomic density of 2 × 10 12 cm −3 , with a temperature of about 10 µK. This technique is a very simple procedure to load a 39 K optical dipole trap without a previous magnetic evaporative cooling step and may find application in other atomic physic systems.

Journal of Physics B Atomic Molecular and Optical Physics•Aug 9, 2012•7 citations

Influence of optical molasses in loading a shallow optical trap

Mathew Hamilton, Anthony Gorges, Jacob Roberts

We have examined loading of $^{85}\mathrm{Rb}$ atoms into a shallow far-off-resonance trap (FORT) from an optical molasses stage following a magneto-optical trap (MOT) stage and compared it to loading from a MOT stage only. Substantially more atoms could be loaded into the FORT using an optical molasses. To determine why this was the case, we measured the rate of atoms loaded into the FORT and the losses from the FORT during both loading processes over a range of detunings and hyperfine pump powers. We found that the losses induced during MOT loading were essentially the same as the losses induced during molasses loading and decreased with increased red detuning; however, we found that the differences in load rate caused an optical molasses to optimize at a greater detuning, improving the number of atoms we could trap by a factor of 2 over that of optimal loading from a MOT.

arXiv:0811.0410•Physical Review A•Jan 21, 2009•6 citations

Ultracold collisions of mixed atoms in optical dipole trap loaded from a dark magneto-optical trap

Yanting Zhao, Ting Gong, Zhonghao Li +4 more

Abstract We study the cold collisions of mixed atoms in an optical dipole trap (ODT), which are loaded from a dark magneto-optical trap (MOT). A comprehensive, phenomenological rate equation is presented to derive the ultracold homonuclear and heteronuclear collision rates in loading and holding procedures. Our results show that the cold atoms in the dark MOT can provide a much better stable, initial atomic sample than MOT. The dependence of the heteronuclear collision rate on the trap depth is attributed to the hyperfine-changing collision by the ODT laser with a broad linewidth. The processes of deriving the collision rate are also universal for other kinds of atoms or even molecules.

Journal of Physics B Atomic Molecular and Optical Physics•Aug 31, 2017•0 citations

Evaporative Cooling of Atoms to Quantum Degeneracy in an Optical Dipole Trap

Saptarishi Chaudhuri, Sanjukta Roy, C. S. Unnikrishnan

We discuss our experimental results on forced evaporative cooling of cold rubidium 87 Rb atoms to quantum degeneracy in an Optical Dipole Trap. The atoms are first trapped and cooled in a magneto-optical trap (MOT) loaded from a continuous beam of cold atoms [1]. More than 10 10 atoms are trapped in the MOT and then about 10 8 atoms are transferred to a Quasi-Electrostatic Trap (QUEST) formed by tightly focused CO2 laser (λ = 10.6μ m ) beams intersecting at their foci in an orthogonal configuration in the horizontal plane. Before loading the atoms into the dipole trap, the phase-space density of the atomic ensemble was increased making use of sub-doppler cooling at large detuning and the temporal dark MOT technique. In a MOT the phase-space density of the atomic ensemble is six orders of magnitude less than what is required to achieve quantum degeneracy. After transferring atoms into the dipole trap efficiently, phase-space density increases by a factor of 10 3 . Further increase in phase-space density to quantum degeneracy is achieved by forced evaporative cooling of atoms in the dipole trap. The evaporative cooling process involves a gradual reduction of the trap depth by ramping down the trapping laser intensity over a second. The temperature of the cold atomic cloud was measured by time-of-flight (TOF) technique. The spatial distribution of the atoms is measured using absorption imaging. We report results of evaporative cooling in a single beam and in a crossed double-beam dipole traps. Due to the large initial phase space density, and large initial number of atoms trapped, the quantum phase transition occurs after about 600 ms of evaporative cooling in our optimized crossed dipole trap.

Journal of Physics Conference Series•Sep 1, 2007•13 citations
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited slate collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients, for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement or the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow n it. In this way we load 8 × 10 6 85 Rb atoms into a 1 mK deep optical dipole trap with a worst of 58 μm, which is 40% of the atoms initially trapped in the MOT.
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.
We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing ≈5×106\approx 5\times 10^{6}≈5×106 atoms. We determine the loading parameters that maximize the trapped atom number for a trap of waist 5 μm with trap depths ranging from 3.5 mK to 10 mK. We determine the optimal trap loading conditions and the loading rates, loss coefficients and temperature of the trapped atoms under these conditions. We show that it is possible to load a few hundred to thousand atoms in dipole traps of depth 3.5 mK to 8.5 mK under the optimal loading conditions.
In this work, we have applied sub-Doppler laser cooling to a 39 K magneto-optical trap in order to load a 1071 nm crossed optical dipole trap. The number of atoms loaded into the dipole trap was characterized as a function of the frequency and intensity of the cooling and repump laser beams. For the optimum conditions, the dipole trap has about 2 × 10 6 atoms at an atomic density of 2 × 10 12 cm −3 , with a temperature of about 10 µK. This technique is a very simple procedure to load a 39 K optical dipole trap without a previous magnetic evaporative cooling step and may find application in other atomic physic systems.
We have examined loading of 85Rb^{85}\mathrm{Rb}85Rb atoms into a shallow far-off-resonance trap (FORT) from an optical molasses stage following a magneto-optical trap (MOT) stage and compared it to loading from a MOT stage only. Substantially more atoms could be loaded into the FORT using an optical molasses. To determine why this was the case, we measured the rate of atoms loaded into the FORT and the losses from the FORT during both loading processes over a range of detunings and hyperfine pump powers. We found that the losses induced during MOT loading were essentially the same as the losses induced during molasses loading and decreased with increased red detuning; however, we found that the differences in load rate caused an optical molasses to optimize at a greater detuning, improving the number of atoms we could trap by a factor of 2 over that of optimal loading from a MOT.
Abstract We study the cold collisions of mixed atoms in an optical dipole trap (ODT), which are loaded from a dark magneto-optical trap (MOT). A comprehensive, phenomenological rate equation is presented to derive the ultracold homonuclear and heteronuclear collision rates in loading and holding procedures. Our results show that the cold atoms in the dark MOT can provide a much better stable, initial atomic sample than MOT. The dependence of the heteronuclear collision rate on the trap depth is attributed to the hyperfine-changing collision by the ODT laser with a broad linewidth. The processes of deriving the collision rate are also universal for other kinds of atoms or even molecules.
We discuss our experimental results on forced evaporative cooling of cold rubidium 87 Rb atoms to quantum degeneracy in an Optical Dipole Trap. The atoms are first trapped and cooled in a magneto-optical trap (MOT) loaded from a continuous beam of cold atoms [1]. More than 10 10 atoms are trapped in the MOT and then about 10 8 atoms are transferred to a Quasi-Electrostatic Trap (QUEST) formed by tightly focused CO2 laser (λ = 10.6μ m ) beams intersecting at their foci in an orthogonal configuration in the horizontal plane. Before loading the atoms into the dipole trap, the phase-space density of the atomic ensemble was increased making use of sub-doppler cooling at large detuning and the temporal dark MOT technique. In a MOT the phase-space density of the atomic ensemble is six orders of magnitude less than what is required to achieve quantum degeneracy. After transferring atoms into the dipole trap efficiently, phase-space density increases by a factor of 10 3 . Further increase in phase-space density to quantum degeneracy is achieved by forced evaporative cooling of atoms in the dipole trap. The evaporative cooling process involves a gradual reduction of the trap depth by ramping down the trapping laser intensity over a second. The temperature of the cold atomic cloud was measured by time-of-flight (TOF) technique. The spatial distribution of the atoms is measured using absorption imaging. We report results of evaporative cooling in a single beam and in a crossed double-beam dipole traps. Due to the large initial phase space density, and large initial number of atoms trapped, the quantum phase transition occurs after about 600 ms of evaporative cooling in our optimized crossed dipole trap.