Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.07900

Quartz phononic crystal resonators for hybrid acoustic quantum memories

Yang Hu, Angad Gupta, Jacob Repicky, Michael J. Hatridge, Thomas Purdy

Published Sep 9, 2025• 1 citation
arXivHTMLPDF

Abstract

Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.

DOI
10.48550/arxiv.2509.07900

Related papers

Quartz Mechanical Resonators for Circuit Quantum Acoustics

Emser, Alec L.

Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.

•Apr 17, 2025•0 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations

Millisecond phonon lifetimes in piezoelectric nanomechanical resonators

Oliver A. Hitchcock, Matthew P. Maksymowych, Kaveh Pezeshki +5 more

Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding $4\times10^8$ ($f\cdot Q_i > 10^{18}$) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.

cond-mat.mes-hallCross-listedarXiv:2610.10700•Oct 9, 2026

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

Epitaxial bulk acoustic wave resonators as highly coherent multi-phonon sources for quantum acoustodynamics

Vikrant Jayant Gokhale, Brian P. Downey, D. Scott Katzer +4 more

Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.

arXiv:2003.11097•Nature Communications•May 8, 2020•98 citations

Quartz-superconductor quantum electromechanical system

M. J. Woolley, Muhammad F. Emzir, Gerard J Milburn +4 more

We propose and analyze a quantum electromechanical system composed of a monolithic quartz bulk acoustic wave oscillator coupled to a superconducting transmon qubit via an intermediate $LC$ electrical circuit. Monolithic quartz oscillators offer unprecedentedly high effective masses and quality factors for the investigation of mechanical oscillators in the quantum regime. Ground-state cooling of such mechanical modes via resonant piezoelectric coupling to an $LC$ circuit, which is itself sideband cooled via coupling to a transmon qubit, is shown to be feasible. The fluorescence spectrum of the qubit, containing motional sideband contributions due to the couplings to the oscillator modes, is obtained and the imprint of the electromechanical steady state on the spectrum is determined. This allows the qubit to function both as a cooling resource for, and transducer of, the mechanical oscillator. The results described are relevant to any hybrid quantum system composed of a qubit coupled to two (coupled or uncoupled) thermal oscillator modes.

arXiv:1604.01834•Physical review. B./Physical review. B•Jun 28, 2016•10 citations
Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.
Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×1084\times10^84×108 (f⋅Qi>1018f\cdot Q_i > 10^{18}f⋅Qi​>1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.
We propose and analyze a quantum electromechanical system composed of a monolithic quartz bulk acoustic wave oscillator coupled to a superconducting transmon qubit via an intermediate LCLCLC electrical circuit. Monolithic quartz oscillators offer unprecedentedly high effective masses and quality factors for the investigation of mechanical oscillators in the quantum regime. Ground-state cooling of such mechanical modes via resonant piezoelectric coupling to an LCLCLC circuit, which is itself sideband cooled via coupling to a transmon qubit, is shown to be feasible. The fluorescence spectrum of the qubit, containing motional sideband contributions due to the couplings to the oscillator modes, is obtained and the imprint of the electromechanical steady state on the spectrum is determined. This allows the qubit to function both as a cooling resource for, and transducer of, the mechanical oscillator. The results described are relevant to any hybrid quantum system composed of a qubit coupled to two (coupled or uncoupled) thermal oscillator modes.