Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Coupling Down Converted Light Into Single Mode Fibers

David A. Niemi

Published Jan 1, 2007• 0 citations
OpenAlex

Abstract

We investigate the influence of the pump and collection mode parameters on the collection efficiency of Type I down converted photons into single mode fibers. For best single and coincidence counting rates, we find that the mode sizes should be close to the same size and that the mode waists should be located near the down-conversion crystal. Larger collection waists give higher collection efficiencies, but lower singles counts.

Related papers

Optimizing the coupling efficiency of spontaneous parametric down-conversion photon pairs into single-mode fibers

Nicolas Schwaller, Geobae Park, Ryo Okamoto +1 more

Both correlated-mode coupling efficiency and photon pair flux (brightness) of spontaneous parametric down-conversion (SPDC) coupled into single-mode fibers are key parameters for various quantum information science applications. We present an experimental investigation on the optimization of the correlated-mode coupling efficiency and the brightness of frequency-degenerated SPDC photon pairs into single-mode optical fibers. Using photon pairs generated from a type-I phase-matched bulk $\ensuremath{\beta}$-barium borate crystal pumped by a continuous-wave laser, we carefully evaluated both the correlated-mode coupling efficiency and the brightness of SPDC light coupled to a single-mode optical fiber, while continuously changing the focusing of the pump and collection modes, experimenting with Rayleigh lengths from 3 to 280 (for the pump) and 0.2 to 20 (for the collection) times the crystal length. The measured data suggest that the correlated-mode coupling efficiency can be close to unity for any pump focus, however, the optimal Rayleigh length of the collection mode depends on the pump focus parameter, and the brightness can be increased by tightening the pump focus, provided that the Rayleigh length of the collection mode is precisely adjusted. A maximal correlated-mode coupling efficiency of $99.0\ifmmode\pm\else\textpm\fi{}1.3%$ was experimentally achieved. These results will be useful for photonic quantum science and technology using SPDC sources with high heralding efficiencies.

Physical Review A•Oct 28, 2022•9 citations

Measurement of coupling PDC photon sources with single-mode and multimode optical fibers

Stefania A. Castelletto, Ivo Pietro Degiovanni, Alan L. Migdall +2 more

We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multi-mode optical fibers as a function of the pump beam diameter, crystal length and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multi-mode PDC light (defined by, for instance, multi-mode fibers or apertures, corresponding to bucket detection). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single spatial mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications.

arXiv:quant-ph/0408015•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 19, 2004•4 citations

Measurement of Coupling PDC photon sources with single-mode and multi-mode optical fibers

Stefania Castelletto, Ivo Pietro Degiovanni, Alan L. Migdall +2 more

We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multi-mode optical fibers as a function of the pump beam diameter, crystal length and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multi-mode PDC light (defined by, for instance, multi-mode fibers or apertures, corresponding to bucket detection). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single spatial mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications. 1.

•Jan 1, 2004•3 citations

Two-Photon Mode Preparation and Matching Efficiency: Definition, Measurement, and Optimization

Stefania Castelletto, Ivo Pietro Degiovanni, G. Furno +3 more

We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multimode optical fibers as a function of the pump beam diameter, crystal length, and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multimode PDC light (defined by, for instance, multimode fibers or apertures). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications.

IEEE Transactions on Instrumentation and Measurement•Mar 21, 2005•13 citations

Efficient fiber coupling of down-conversion photon pairs

Andrzej Dragan

We develop and apply an effective analytic theory of a noncollinear, broadband type-I parametric down-conversion to study a coupling efficiency of the generated photon pairs into single mode optical fibers. We derive conditions necessary for highly efficient coupling for single and double type-I crystal producing polarization entangled states of light. We compare the obtained approximate analytic expressions with the exact numerical solutions and discuss the results for a case of beta barium borate crystals.

arXiv:quant-ph/0407113•Physical Review A•Nov 12, 2004•32 citations

Towards ultrabright photon pair sources for quantum communication (Conference Presentation)

Rana Sebak, Emma Brambila, Tobias Bernd Gäbler +3 more

Entangled photon pairs play a crucial role in emerging quantum technologies, acting as tamper-proof padlocks in secure quantum communication, ultra-precise probes in quantum metrology and high-fidelity information carriers in photonic quantum computing. Amongst the many technological possibilities for generating photon pairs, sources based on spontaneous parametric down-conversion (SPDC) in second-order nonlinear crystals are still the workhorse tool in quantum optics laboratories, and more recently even in long-distance quantum communication with satellites. SPDC is a widely used method to create entangled photon pairs. The number of photon pairs that can be detected in a particular choice of collection modes, typically being optical single-mode fibers, depends critically on the spatial characteristics of the multi-mode SPDC emission as well as the particular beam waist of the collection modes. While several studies have already addressed the issue of optimal fiber coupling of SPDC photons in theory and experiment, the results of these studies arrive at different conclusions. Here, we present the results of a comprehensive experimental study on the optimal collection of photon pairs into single-mode optical fibers. Our approach is based on quasi-phase-matched type II SPDC from a periodically poled KTiOPO4 (ppKTP) crystal. We discuss the influence of pump and collection focal parameters on the spectral brightness and heralding efficiency, as well as practical issues of alignment tolerances into an optical single mode fiber. Further, Using two-photon interference (Hong-Ou-Mandel interference), we assess the spectral bandwidth of the photon pairs for variable crystal lengths. The results are in good agreement with our theoretical model, thus providing the recipe of building ultra bright and stable entangled photon sources.

SPIE Quantum Technologies•Mar 30, 2020•0 citations
We investigate the influence of the pump and collection mode parameters on the collection efficiency of Type I down converted photons into single mode fibers. For best single and coincidence counting rates, we find that the mode sizes should be close to the same size and that the mode waists should be located near the down-conversion crystal. Larger collection waists give higher collection efficiencies, but lower singles counts.
Both correlated-mode coupling efficiency and photon pair flux (brightness) of spontaneous parametric down-conversion (SPDC) coupled into single-mode fibers are key parameters for various quantum information science applications. We present an experimental investigation on the optimization of the correlated-mode coupling efficiency and the brightness of frequency-degenerated SPDC photon pairs into single-mode optical fibers. Using photon pairs generated from a type-I phase-matched bulk $\ensuremath{\beta}$-barium borate crystal pumped by a continuous-wave laser, we carefully evaluated both the correlated-mode coupling efficiency and the brightness of SPDC light coupled to a single-mode optical fiber, while continuously changing the focusing of the pump and collection modes, experimenting with Rayleigh lengths from 3 to 280 (for the pump) and 0.2 to 20 (for the collection) times the crystal length. The measured data suggest that the correlated-mode coupling efficiency can be close to unity for any pump focus, however, the optimal Rayleigh length of the collection mode depends on the pump focus parameter, and the brightness can be increased by tightening the pump focus, provided that the Rayleigh length of the collection mode is precisely adjusted. A maximal correlated-mode coupling efficiency of $99.0\ifmmode\pm\else\textpm\fi{}1.3%$ was experimentally achieved. These results will be useful for photonic quantum science and technology using SPDC sources with high heralding efficiencies.
We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multi-mode optical fibers as a function of the pump beam diameter, crystal length and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multi-mode PDC light (defined by, for instance, multi-mode fibers or apertures, corresponding to bucket detection). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single spatial mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications.
We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multi-mode optical fibers as a function of the pump beam diameter, crystal length and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multi-mode PDC light (defined by, for instance, multi-mode fibers or apertures, corresponding to bucket detection). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single spatial mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications. 1.
We investigate the coupling efficiency of parametric downconversion light (PDC) into single and multimode optical fibers as a function of the pump beam diameter, crystal length, and walk-off. We outline two different theoretical models for the preparation and collection of either single-mode or multimode PDC light (defined by, for instance, multimode fibers or apertures). Moreover, we define the mode-matching collection efficiency, important for realizing a single-photon source based on PDC output into a well-defined single mode. We also define a multimode collection efficiency that is useful for single-photon detector calibration applications.
We develop and apply an effective analytic theory of a noncollinear, broadband type-I parametric down-conversion to study a coupling efficiency of the generated photon pairs into single mode optical fibers. We derive conditions necessary for highly efficient coupling for single and double type-I crystal producing polarization entangled states of light. We compare the obtained approximate analytic expressions with the exact numerical solutions and discuss the results for a case of beta barium borate crystals.
Entangled photon pairs play a crucial role in emerging quantum technologies, acting as tamper-proof padlocks in secure quantum communication, ultra-precise probes in quantum metrology and high-fidelity information carriers in photonic quantum computing. Amongst the many technological possibilities for generating photon pairs, sources based on spontaneous parametric down-conversion (SPDC) in second-order nonlinear crystals are still the workhorse tool in quantum optics laboratories, and more recently even in long-distance quantum communication with satellites. SPDC is a widely used method to create entangled photon pairs. The number of photon pairs that can be detected in a particular choice of collection modes, typically being optical single-mode fibers, depends critically on the spatial characteristics of the multi-mode SPDC emission as well as the particular beam waist of the collection modes. While several studies have already addressed the issue of optimal fiber coupling of SPDC photons in theory and experiment, the results of these studies arrive at different conclusions. Here, we present the results of a comprehensive experimental study on the optimal collection of photon pairs into single-mode optical fibers. Our approach is based on quasi-phase-matched type II SPDC from a periodically poled KTiOPO4 (ppKTP) crystal. We discuss the influence of pump and collection focal parameters on the spectral brightness and heralding efficiency, as well as practical issues of alignment tolerances into an optical single mode fiber. Further, Using two-photon interference (Hong-Ou-Mandel interference), we assess the spectral bandwidth of the photon pairs for variable crystal lengths. The results are in good agreement with our theoretical model, thus providing the recipe of building ultra bright and stable entangled photon sources.