IF Impedance and Mixer Gain of Phonon Cooled Hot-Electron Bolometers and the Perrin-Vanneste Two Temperature Model
J. Kooi, J. J. A. Baselmans, J. R. Gao, Pieter Dieleman, Yang, Z. Q., Andrey M. Baryshev, Merlijn Hajenius, de Lange, G., T. M. Klapwijk
Abstract
We have measured the IF impedance and mixer gain bandwidth of a small area phonon cooled hot-electron bolometer in the 0.05-10 GHz range under a variety of bias and LO pumping level conditions. The device used is a twin slot antenna coupled NbN HEB mixer, with a bridge area of 1 μm x 0.15 μm, and a critical temperature of 8.3 K. We model the HEB IF impedance following the work of Nebosis, Semenov, Gousev, and Renk, from now on refered to as the ”NSGR” model. This model is based on the two-temperature model of Perrin-Vanneste, and is found to accurately describe the measured data at different bias and LO pump levels. Three fitting parameters are used in the NSGR model to describe the frequency dependent modulation of the electron temperature; the electron-phonon interaction time τeph, the phonon escape time (into the substrate) τes, and the ratio of the electron and phonon specific heat capacity ce/cph. The described time constants and temperature dependent heat capacity ratio obtained from fitting the model to the measured data agrees well with those reported on for thin NbN films in literature. Using an expression for mixer gain from the NSGR model, but modified to take additional parasitic loss and the complex voltage reflection between mixer and IF load impedance into account, we find when we use the impedance fit parameters τeph, τes, ce/cph, an excellent agreement between measured and modeled HEB conversion gain. Keywords— IF Impedance, phonon cooled hot electron bolometer (pHEB), two-temperature model, ”hot” electrons, Perrin-Vanneste, NSGR model, electron temperature modulation, electron-phonon interaction time, phonon escape time, electro-thermal feedback, complex impedance, HEB mixer conversion gain.