Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Investigating the $\chi ^{(3)}$ Nonlinearity of a Josephson Junction Array for Travelling-Wave Parametric Amplification in the W-Band

Javier Navarro Montilla, Ryan Stephenson, A. Barbier, Nikita S. Klimovich, Yves Bortolotti, E. F. C. Driessen, Peter K. Day, Boon-Kok Tan

Published Nov 24, 2025• 1 citation
Publisher

Abstract

At microwave frequencies, Josephson junction arrays have been widely employed to create metamaterials exhibiting a third-order ($\chi ^{(3)}$) nonlinearity, analogous to the Kerr effect in optics. These nonlinear metamaterials enable parametric amplification, as in Josephson Travelling-Wave Parametric Amplifiers (JTWPAs), which achieve quantum-limited noise performance over multi-gigahertz bandwidths. The exceptional properties of JTWPAs make them ideal for the sensitive readout of weak microwave signals, with applications in quantum computing, astrophysics, and fundamental physics experiments. Extending JTWPAs to higher frequencies, such as the W-band (70–110 GHz), holds promise for first-stage amplification in astronomical receivers, lowering system noise; as well as for reading out emerging superconducting qubit architectures at these frequencies. In this work, we investigate the$\chi ^{(3)}$nonlinear properties of Josephson arrays operating in the W-band as a step toward realising parametric gain at these frequencies. We designed and fabricated an array composed of 704 Nb/Al-AlO$_{\mathrm{x}}$/Nb tunnel junctions and experimentally demonstrated four-wave mixing via idler tone generation, providing clear evidence of third-order nonlinearity. These results mark an important step toward novel millimetre-wave and sub-millimetre-wave parametric-amplifier-based receiver technologies.

DOI
10.1109/tasc.2025.3636612

Related papers

Development of superconducting josephson junction travelling wave parametric amplifiers

Navarro Montilla, Javier

Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.

•Jan 1, 2024•0 citations

Design of a Traveling-Wave Parametric Amplifier with a π -Josephson Junction

Shuyuan Cui, Daiki Fukuyo, Hiroshi Shimada +1 more

Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.

Journal of Physics Conference Series•Jul 1, 2026•0 citations

Design, fabrication, and modeling of Nb-based Josephson traveling wave parametric amplifiers toward quantum-limited readout

A. Mauro, G. Carapella, Guerino Avallone +8 more

This work presents the design, fabrication strategy, and numerical modeling of niobium-based Josephson traveling-wave parametric amplifiers (JTWPAs) for quantum microwave readout. These devices are designed as nonlinear transmission lines composed of more than two thousand Josephson junction unit cells, with periodically embedded resonators enabling phase matching. The use of Nb trilayer technology (Nb/AlO[Formula: see text]/Nb) with respect to Al-based devices ensures higher junction uniformity, lower losses, and higher resilience to stray magnetic fields. We developed a multi-scale modeling framework combining harmonic balance methods and time-domain simulations of nonlinear coupled differential equations to describe wave propagation, parametric amplification, and spectral dynamics. Numerical results predict broadband gain up to 20[Formula: see text]dB over multi-GHz bandwidths. These results demonstrate the potential of Nb-based JTWPAs as scalable components for quantum applications.

International Journal of Geometric Methods in Modern Physics•Jul 31, 2026•0 citations

Four-Photon Josephson Traveling Wave Parametric Amplifier

A. A. Lomonosov, Roman Kubrakov, Lyudmila V. Filippenko +4 more

Abstract Josephson traveling wave parametric amplifiers can have high gain and wide frequency range, high sensitivity, and low noise, which makes them promising for quantum computing, array receiver readout systems, spectroscopy, single-photon detectors, etc. In this paper, the authors investigate samples of traveling wave parametric amplifiers based on a three-layer Nb/AlO x /Nb superconductor–insulator–superconductor (SIS) structure with a SNAIL (Superconducting Nonlinear Asymmetric Inductive Elements) series array. Each SNAIL cell consists of the kinetic inductance of four SIS junctions and the nonlinear inductance of a smaller SIS junction. The cells are alternately connected in antiphase with respect to the magnetic flux, which ensures a change in the sign of the Kerr nonlinearity and a reduction in the phase mismatch for the pump frequency, signal frequency, and idler frequency. The transmission spectra of the samples were measured at temperatures of 4.2 and 2.8 K in the frequency range of 0.1–6 GHz.

Instruments and Experimental Techniques•Oct 1, 2024•1 citation

Exploring the limits of the tunnel junction fabrication technique for Josephson junctions TWPA and the preliminary characterisation results

J Navarro Montilla, EFC Driessen, A Barbier +3 more

Travelling Wave Parametric Amplifiers (TWPAs) can potentially achieve quantum limited noise over a broad bandwidth in the microwave regime, with potential applications in the readout of millimetre (mm) and sub-millimetre (sub-mm) receivers to further improve the system sensitivity, among many other applications. TWPAs using embedded Josephson junctions (J-TWPA) have proven to exhibit noise performance approaching the quantum limit, however its compression point (P–1dB ~ –100 dBm) is too low for reading out mm and sub-mm astronomical receivers. Therefore, we explored the design of higher dynamic range JTWPAs to match the power requirements, and to optimise the performances of the JTWPA for this specific application. Our aim is to adapt the well-established Nb-AlOx-Nb tri-layer fabrication technique used routinely for developing high-quality Superconductor-Insulator-Superconductor (SIS) tunnel junctions to fabricate our JTWPA. Therefore, we present in this paper our investigation of the feasibility of such technique in fabricating large number of lower critical current density junctions embedded in a coplanar waveguide (CPW). The preliminary results on a 500-junctions device are in line with the expected behaviour, showing a measured gain consistent with theoretical calculations which demonstrates the potential use of the tri-layer tunnel junction technology for the fabrication of JTWPAs.

•Jan 1, 2024•0 citations

Design considerations for a W-band Josephson junction travelling wave parametric amplifier

J Navarro Montilla, A Barbier, EFC Driessen +1 more

Most Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) developed so far have been focused on operation below 20 GHz, primarily driven by the choice of the qubit resonance frequency used in quantum computation research. Consequently, there is a lack of effort to extend their operation to higher frequency ranges. However, millimetre (mm)- wave JTWPAs could offer potential significant advantages for astronomy, but their operation in this regime is largely unexplored. In this paper, we describe the design considerations for extending JTWPAs operation to the W-band range. We present two JTWPA designs, one with and one without phase matching elements, and we discuss the design methodology of both approaches, before showing their predicted performance respectively.

•Jan 1, 2025•0 citations
Investigating the χ(3)\chi ^{(3)}χ(3) Nonlinearity of a Josephson Junction Array for Travelling-Wave Parametric Amplification in the W-Band
At microwave frequencies, Josephson junction arrays have been widely employed to create metamaterials exhibiting a third-order (χ(3)\chi ^{(3)}χ(3)) nonlinearity, analogous to the Kerr effect in optics. These nonlinear metamaterials enable parametric amplification, as in Josephson Travelling-Wave Parametric Amplifiers (JTWPAs), which achieve quantum-limited noise performance over multi-gigahertz bandwidths. The exceptional properties of JTWPAs make them ideal for the sensitive readout of weak microwave signals, with applications in quantum computing, astrophysics, and fundamental physics experiments. Extending JTWPAs to higher frequencies, such as the W-band (70–110 GHz), holds promise for first-stage amplification in astronomical receivers, lowering system noise; as well as for reading out emerging superconducting qubit architectures at these frequencies. In this work, we investigate theχ(3)\chi ^{(3)}χ(3)nonlinear properties of Josephson arrays operating in the W-band as a step toward realising parametric gain at these frequencies. We designed and fabricated an array composed of 704 Nb/Al-AlOx_{\mathrm{x}}x​/Nb tunnel junctions and experimentally demonstrated four-wave mixing via idler tone generation, providing clear evidence of third-order nonlinearity. These results mark an important step toward novel millimetre-wave and sub-millimetre-wave parametric-amplifier-based receiver technologies.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.
This work presents the design, fabrication strategy, and numerical modeling of niobium-based Josephson traveling-wave parametric amplifiers (JTWPAs) for quantum microwave readout. These devices are designed as nonlinear transmission lines composed of more than two thousand Josephson junction unit cells, with periodically embedded resonators enabling phase matching. The use of Nb trilayer technology (Nb/AlO[Formula: see text]/Nb) with respect to Al-based devices ensures higher junction uniformity, lower losses, and higher resilience to stray magnetic fields. We developed a multi-scale modeling framework combining harmonic balance methods and time-domain simulations of nonlinear coupled differential equations to describe wave propagation, parametric amplification, and spectral dynamics. Numerical results predict broadband gain up to 20[Formula: see text]dB over multi-GHz bandwidths. These results demonstrate the potential of Nb-based JTWPAs as scalable components for quantum applications.
Abstract Josephson traveling wave parametric amplifiers can have high gain and wide frequency range, high sensitivity, and low noise, which makes them promising for quantum computing, array receiver readout systems, spectroscopy, single-photon detectors, etc. In this paper, the authors investigate samples of traveling wave parametric amplifiers based on a three-layer Nb/AlO x /Nb superconductor–insulator–superconductor (SIS) structure with a SNAIL (Superconducting Nonlinear Asymmetric Inductive Elements) series array. Each SNAIL cell consists of the kinetic inductance of four SIS junctions and the nonlinear inductance of a smaller SIS junction. The cells are alternately connected in antiphase with respect to the magnetic flux, which ensures a change in the sign of the Kerr nonlinearity and a reduction in the phase mismatch for the pump frequency, signal frequency, and idler frequency. The transmission spectra of the samples were measured at temperatures of 4.2 and 2.8 K in the frequency range of 0.1–6 GHz.
Travelling Wave Parametric Amplifiers (TWPAs) can potentially achieve quantum limited noise over a broad bandwidth in the microwave regime, with potential applications in the readout of millimetre (mm) and sub-millimetre (sub-mm) receivers to further improve the system sensitivity, among many other applications. TWPAs using embedded Josephson junctions (J-TWPA) have proven to exhibit noise performance approaching the quantum limit, however its compression point (P–1dB ~ –100 dBm) is too low for reading out mm and sub-mm astronomical receivers. Therefore, we explored the design of higher dynamic range JTWPAs to match the power requirements, and to optimise the performances of the JTWPA for this specific application. Our aim is to adapt the well-established Nb-AlOx-Nb tri-layer fabrication technique used routinely for developing high-quality Superconductor-Insulator-Superconductor (SIS) tunnel junctions to fabricate our JTWPA. Therefore, we present in this paper our investigation of the feasibility of such technique in fabricating large number of lower critical current density junctions embedded in a coplanar waveguide (CPW). The preliminary results on a 500-junctions device are in line with the expected behaviour, showing a measured gain consistent with theoretical calculations which demonstrates the potential use of the tri-layer tunnel junction technology for the fabrication of JTWPAs.
Most Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) developed so far have been focused on operation below 20 GHz, primarily driven by the choice of the qubit resonance frequency used in quantum computation research. Consequently, there is a lack of effort to extend their operation to higher frequency ranges. However, millimetre (mm)- wave JTWPAs could offer potential significant advantages for astronomy, but their operation in this regime is largely unexplored. In this paper, we describe the design considerations for extending JTWPAs operation to the W-band range. We present two JTWPA designs, one with and one without phase matching elements, and we discuss the design methodology of both approaches, before showing their predicted performance respectively.