Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design considerations for a W-band Josephson junction travelling wave parametric amplifier

J Navarro Montilla, A Barbier, EFC Driessen, B-K Tan

Published Jan 1, 2025• 0 citations
OpenAlex

Abstract

Most Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) developed so far have been focused on operation below 20 GHz, primarily driven by the choice of the qubit resonance frequency used in quantum computation research. Consequently, there is a lack of effort to extend their operation to higher frequency ranges. However, millimetre (mm)- wave JTWPAs could offer potential significant advantages for astronomy, but their operation in this regime is largely unexplored. In this paper, we describe the design considerations for extending JTWPAs operation to the W-band range. We present two JTWPA designs, one with and one without phase matching elements, and we discuss the design methodology of both approaches, before showing their predicted performance respectively.

Related papers

Development of superconducting josephson junction travelling wave parametric amplifiers

Navarro Montilla, Javier

Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.

•Jan 1, 2024•0 citations

Design and Measurement Of A Josephson Traveling Wave Parametric Amplifier Fabricated In A Superconducting Qubit Process

Dennis C. Feng, Mehrnoosh Vahidpour, Yuvraj Mohan +5 more

Josephson junction based parametric amplifiers are used to read out the state of superconducting qubits with high fidelity. These amplifiers are themselves superconducting circuits operating at temperatures of tens of millikelvin. A version of this type of amplifier which has exhibited large bandwidth and saturation power is the Josephson traveling wave parametric amplifier (JTWPA). One particular JTWPA topology consists of hundreds to thousands of Josephson junctions in a transmission line configuration along with periodic phase matching resonators to increase gain. Here, we look at using a superconducting qubit fabrication process to realize this circuit To analyze the sensitivity of the JTWPA to fabrication process variation, we discuss a linear model for the circuit which takes into account unit cell to unit cell variation. To extract the measured circuit values, we use in-situ measurements of a JTWPA to compare the designed values to the realized values. Finally we discuss preliminary results realizing an example JTWPA design using a fabrication process designed for superconducting qubits.

IEEE MTT-S International Microwave Symposium digest•Aug 1, 2020•6 citations

Design of high compression point Josephson junction travelling wave parametric amplifier for readout of millimetre/sub-millimetre astronomical receivers

Javier Navarro Montilla, Boon-Kok Tan

Supra-THz heterodyne mixers generally have higher conversion loss compared to the millimetre-wave mixers. Hence, the overall receiver noise temperature becomes increasingly dominated by the first-stage semiconductor low noise amplifier (LNA), which still struggles to achieve quantum-limited noise performance. Here, we aim to develop a Josephson junction travelling wave parametric amplifier (JTWPA) that can achieve high gain over broad bandwidth but with better noise performance to replace these Intermediate Frequency (IF) amplifiers. JTWPAs are typically considered not suitable for astronomical receivers due to their low power handling capability. However, the critical current of the Josephson junctions (JJ) can be easily engineered to match the output power of the front-end detectors. Nevertheless, this may results in the requirement of a higher number of JJs as the junction inductance is in reverse relation with the critical current. Therefore, in this paper, we aim to explore the different design parameters required for developing a JTWPA with a dynamic range compatible for readout a Superconductor-Insulator-Superconductor (SIS) mixer, as an example. Here, we present two JTWPA models that are suitable for the objective, one requiring 3,142 Nb/Al-AlOx/Nb junctions with a maximum gain of 23 dB, and the other with a lower gain at 16 dB but requires only 1,317 JJs. We then compare the SIS receiver noise performance utilising these JTWPAs with that of using a conventional high gain High Electron Mobility Transistor (HEMT) amplifier. We show that we can improve the receiver sensitivity significantly by either cascading two 23 dB gain JTWPA or using a combination of a 16 dB gain JTWPA and a HEMT amplifier. We conclude that the former option more suitable for large detector array applications as it completely replaces the high heat dissipation HEMT amplifiers; while the latter option is favourable at this stage for low pixel count application as it is easier to fabricate a lower number of junctions JTWPA.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jul 15, 2022•1 citation

Multiphysics Numerical Method for Modeling Josephson Traveling-Wave Parametric Amplifiers

Samuel T. Elkin, Michael Haider, Thomas E. Roth

Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.

arXiv:2403.15217•IEEE journal on multiscale and multiphysics computational techniques•Jan 1, 2024•12 citations

Advanced Simulation and Design Methodology of Josephson Traveling-Wave Parametric Amplifiers (JTWPA) for Quantum Electronics Applications

Aziz Oukaira, Yvon Savaria, Mounir Boukadoum +1 more

This paper examines the use of a quantum electronics Josephson Traveling-Wave Parametric Amplifier (JTWPA). The JTWPA presents distinctive features for amplifying quantum signals through the nonlinear Josephson junction, influenced by quantum effects at microwave energy scales. The study focuses on characterizing this quantum effects-based parametric amplification, offering perspectives in communication and information processing technologies. The results, obtained with the Advanced Design System (ADS) pathWave tool suggest promising applications of JTWPA, paving the way for significant advances in quantum electronics. Notably, the findings indicate that at a fixed frequency of 4 GHz and a constant pump current of 1.85 µA, the transmission efficiency of JTWPA decreases by 32% when exporting the design as layouts using the High-Frequency Structural Simulator (HFSS). Consequently, optimization with ADS emerges as a crucial step to assess transmission and information processing before the physical implementation of the JTWPA design.

International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET)•May 16, 2024•3 citations

Design of a Traveling-Wave Parametric Amplifier with a π -Josephson Junction

Shuyuan Cui, Daiki Fukuyo, Hiroshi Shimada +1 more

Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.

Journal of Physics Conference Series•Jul 1, 2026•0 citations
Most Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) developed so far have been focused on operation below 20 GHz, primarily driven by the choice of the qubit resonance frequency used in quantum computation research. Consequently, there is a lack of effort to extend their operation to higher frequency ranges. However, millimetre (mm)- wave JTWPAs could offer potential significant advantages for astronomy, but their operation in this regime is largely unexplored. In this paper, we describe the design considerations for extending JTWPAs operation to the W-band range. We present two JTWPA designs, one with and one without phase matching elements, and we discuss the design methodology of both approaches, before showing their predicted performance respectively.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
Josephson junction based parametric amplifiers are used to read out the state of superconducting qubits with high fidelity. These amplifiers are themselves superconducting circuits operating at temperatures of tens of millikelvin. A version of this type of amplifier which has exhibited large bandwidth and saturation power is the Josephson traveling wave parametric amplifier (JTWPA). One particular JTWPA topology consists of hundreds to thousands of Josephson junctions in a transmission line configuration along with periodic phase matching resonators to increase gain. Here, we look at using a superconducting qubit fabrication process to realize this circuit To analyze the sensitivity of the JTWPA to fabrication process variation, we discuss a linear model for the circuit which takes into account unit cell to unit cell variation. To extract the measured circuit values, we use in-situ measurements of a JTWPA to compare the designed values to the realized values. Finally we discuss preliminary results realizing an example JTWPA design using a fabrication process designed for superconducting qubits.
Supra-THz heterodyne mixers generally have higher conversion loss compared to the millimetre-wave mixers. Hence, the overall receiver noise temperature becomes increasingly dominated by the first-stage semiconductor low noise amplifier (LNA), which still struggles to achieve quantum-limited noise performance. Here, we aim to develop a Josephson junction travelling wave parametric amplifier (JTWPA) that can achieve high gain over broad bandwidth but with better noise performance to replace these Intermediate Frequency (IF) amplifiers. JTWPAs are typically considered not suitable for astronomical receivers due to their low power handling capability. However, the critical current of the Josephson junctions (JJ) can be easily engineered to match the output power of the front-end detectors. Nevertheless, this may results in the requirement of a higher number of JJs as the junction inductance is in reverse relation with the critical current. Therefore, in this paper, we aim to explore the different design parameters required for developing a JTWPA with a dynamic range compatible for readout a Superconductor-Insulator-Superconductor (SIS) mixer, as an example. Here, we present two JTWPA models that are suitable for the objective, one requiring 3,142 Nb/Al-AlOx/Nb junctions with a maximum gain of 23 dB, and the other with a lower gain at 16 dB but requires only 1,317 JJs. We then compare the SIS receiver noise performance utilising these JTWPAs with that of using a conventional high gain High Electron Mobility Transistor (HEMT) amplifier. We show that we can improve the receiver sensitivity significantly by either cascading two 23 dB gain JTWPA or using a combination of a 16 dB gain JTWPA and a HEMT amplifier. We conclude that the former option more suitable for large detector array applications as it completely replaces the high heat dissipation HEMT amplifiers; while the latter option is favourable at this stage for low pixel count application as it is easier to fabricate a lower number of junctions JTWPA.
Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.
This paper examines the use of a quantum electronics Josephson Traveling-Wave Parametric Amplifier (JTWPA). The JTWPA presents distinctive features for amplifying quantum signals through the nonlinear Josephson junction, influenced by quantum effects at microwave energy scales. The study focuses on characterizing this quantum effects-based parametric amplification, offering perspectives in communication and information processing technologies. The results, obtained with the Advanced Design System (ADS) pathWave tool suggest promising applications of JTWPA, paving the way for significant advances in quantum electronics. Notably, the findings indicate that at a fixed frequency of 4 GHz and a constant pump current of 1.85 µA, the transmission efficiency of JTWPA decreases by 32% when exporting the design as layouts using the High-Frequency Structural Simulator (HFSS). Consequently, optimization with ADS emerges as a crucial step to assess transmission and information processing before the physical implementation of the JTWPA design.
Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.