Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Laser, Optics and Optoelectronic Technology (LOPET)

Pound-Drever-Hall locking of four-mirror optical cavity for cold atom interferometry

shaojun gao, guodong xin, qufei wang, Lingxiao Zhu, Xiaoxiao Ma

Published Aug 20, 2025• 0 citations
Publisher

Abstract

Atom interferometers, as precision gravity sensors, encounter inherent miniaturization challenges due to constraints like interference time and laser pulse intensity. Optical cavities address these limitations through wavefront purification, spatial mode filtering, and resonance-enhanced amplification, significantly enhancing interferometer stability and performance for compact quantum sensing applications. This study develops a fiber-integrated four-mirror cavity locking system based on the Pound-Drever-Hall (PDH) technique combined with modulation transfer spectroscopy (MTS), designed for cavityenhanced Raman resonance control in atom interferometry. The system utilizes a fiber-based electro-optic modulator (EOM) for red-detuned frequency shifting, with MTS stabilization applied to lock the cavity to the +1st-order sideband while maintaining the carrier as the locking beam. A fiber-optic circulator architecture in the PDH feedback loop eliminates environmental disturbances (stray light and vibrations) on dispersion-based error signals. Experimental implementation demonstrates continuous cavity locking for over 2 hours with transmitted power fluctuations below 2%. Validation using pulsed Raman beams (400μs duration) confirms the scheme's compatibility with cavity-enhanced atom interferometry, establishing a methodological framework for multi-beam quantum interference experiments in optical cavity.

DOI
10.1117/12.3075990

Related papers

Robust cavity metrology beyond the limits of Pound-Drever-Hall

Ibukunoluwa Adisa, Won Chan Lee, Yanqin Huang +3 more

Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.

quant-pharXiv:2608.21512•Aug 25, 2026•0 citations

Artificial modulation-free Pound–Drever–Hall method for laser frequency stabilization

H. M. Wang, Zitong Xu, S. C. Ma +3 more

We have proposed an artificial modulation-free Pound-Drever-Hall (PDH) method for laser frequency stabilization and demonstrated it via two-color polarization spectroscopy of Rydberg electromagnetically induced transparency (EIT) resonance in a room-temperature rubidium vapor. Due to the unique error signal profile, the conventional PDH method owns a large capture range in laser frequency locking. Here we manually construct a PDH error signal via a linear combination of polarization spectroscopies of the Rydberg EIT resonances without and with a magnetic field applied. The artificial modulation-free PDH error signal owns a subnatural linewidth dispersion curve as well as a large capture range with which we successfully stabilize the laser to an absolute atomic frequency reference in a long running time, immune to environmental fluctuation and even manmade impulse perturbation. This method can provide an absolute frequency reference based on atomic transition while keeping similar locking ability to provide corrections for frequency fluctuations over a broad bandwidth as the conventional PDH.

Optics Letters•Nov 27, 2019•19 citations

Dynamic Fabry-Pérot cavity stabilization technique for atom-cavity experiments

S. P. Dinesh, V. R. Thakar, V. I. Gokul +2 more

Abstract We present a stabilization technique developed to lock and dynamically tune the resonant frequency of a moderate finesse Fabry-Pérot (FP) cavity used in precision atom-cavity quantum electrodynamics (QED) experiments. Most experimental setups with active stabilization either operate at one fixed resonant frequency or use transfer cavities to achieve the ability to tune the resonant frequency of the cavity. In this work, we present a simple and cost-effective solution to actively stabilize an optical cavity while achieving a dynamic tuning range of over 100 MHz with a precision under 1 MHz. Our unique scheme uses a reference laser locked to an electro-optic modulator (EOM) shifted saturation absorption spectroscopy (SAS) signal. The cavity is locked to the PDH error signal obtained from the dip in the reflected intensity of this reference laser. Our setup provides the feature to efficiently tune the resonant frequency of the cavity by only changing the EOM drive without unlocking and re-locking either the reference laser or the cavity. We present measurements of precision control of the resonant cavity frequency and vacuum Rabi splitting (VRS) to quantify the stability achieved and hence show that this technique is suitable for a variety of cavity QED experiments.

arXiv:2310.16415•EPJ Techniques and Instrumentation•Jan 30, 2024•7 citations

Quadrature amplitude modulation for electronic sideband Pound-Drever-Hall laser frequency locking

Tu, J., Alessandro Restelli, K. Weber +4 more

The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of $1.01$ rad and root-mean-square I/Q errors below $0.3\ \%$ over a carrier-frequency range of $350~\mathrm{MHz}$ to $1.75~\mathrm{GHz}$. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.

arXiv:2409.08764•Sep 13, 2024•2 citations

Pound-Drever-Hall Feedforward for Trapped-Ion Optical Qubits

Jia-Yang Gao, Jianwei Lee, Morteza Ahmadi +1 more

Laser phase noise is one of the limiting factors that dictate gate fidelities and coherence times in trapped-ion quantum systems. Previous studies have reported that when the Rabi frequency of an ion qubit is close to the servo-bump phase-noise frequency, the driving laser limits the fidelity and coherence time. This issue has typically been mitigated by choosing a Rabi frequency outside the servo-bump region. However, this constrains the usable range of gate speeds and can limit the achievable fidelity. To address this issue, we developed an active phase-noise stabilization system for a barium-ion optical-qubit laser at 1762 nm, employing a fiber electro-optic modulator (EOM) with an electrical feedforward servo. Our results demonstrate that this setup, based on the Pound-Drever-Hall (PDH) feedforward method, can suppress servo-bump phase noise by 15 dB near the bump peak frequency in our locking system. The laser phase noise is analyzed using delayed self-heterodyne interferometry (DSHI). We further tested the stabilized laser on an optical qubit and observed a clear improvement in coherence time based on the measured amplitude decay of Rabi oscillations, even when the Rabi frequency lies within the servo-bump bandwidth. This technique can be readily adapted to other optical qubits with minimal modifications.

quant-pharXiv:2607.24050•Jul 28, 2026•0 citations

Cavity-enhanced detection of transient absorption signals

Fernanda C. Rodrigues-Machado, Pauline Pestre, Liam Scanlon +3 more

\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n

APS Division of Atomic, Molecular and Optical Physics Meeting Abstracts•Jan 1, 2020•0 citations
Atom interferometers, as precision gravity sensors, encounter inherent miniaturization challenges due to constraints like interference time and laser pulse intensity. Optical cavities address these limitations through wavefront purification, spatial mode filtering, and resonance-enhanced amplification, significantly enhancing interferometer stability and performance for compact quantum sensing applications. This study develops a fiber-integrated four-mirror cavity locking system based on the Pound-Drever-Hall (PDH) technique combined with modulation transfer spectroscopy (MTS), designed for cavityenhanced Raman resonance control in atom interferometry. The system utilizes a fiber-based electro-optic modulator (EOM) for red-detuned frequency shifting, with MTS stabilization applied to lock the cavity to the +1st-order sideband while maintaining the carrier as the locking beam. A fiber-optic circulator architecture in the PDH feedback loop eliminates environmental disturbances (stray light and vibrations) on dispersion-based error signals. Experimental implementation demonstrates continuous cavity locking for over 2 hours with transmitted power fluctuations below 2%. Validation using pulsed Raman beams (400μs duration) confirms the scheme's compatibility with cavity-enhanced atom interferometry, establishing a methodological framework for multi-beam quantum interference experiments in optical cavity.
Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.
We have proposed an artificial modulation-free Pound-Drever-Hall (PDH) method for laser frequency stabilization and demonstrated it via two-color polarization spectroscopy of Rydberg electromagnetically induced transparency (EIT) resonance in a room-temperature rubidium vapor. Due to the unique error signal profile, the conventional PDH method owns a large capture range in laser frequency locking. Here we manually construct a PDH error signal via a linear combination of polarization spectroscopies of the Rydberg EIT resonances without and with a magnetic field applied. The artificial modulation-free PDH error signal owns a subnatural linewidth dispersion curve as well as a large capture range with which we successfully stabilize the laser to an absolute atomic frequency reference in a long running time, immune to environmental fluctuation and even manmade impulse perturbation. This method can provide an absolute frequency reference based on atomic transition while keeping similar locking ability to provide corrections for frequency fluctuations over a broad bandwidth as the conventional PDH.
Abstract We present a stabilization technique developed to lock and dynamically tune the resonant frequency of a moderate finesse Fabry-Pérot (FP) cavity used in precision atom-cavity quantum electrodynamics (QED) experiments. Most experimental setups with active stabilization either operate at one fixed resonant frequency or use transfer cavities to achieve the ability to tune the resonant frequency of the cavity. In this work, we present a simple and cost-effective solution to actively stabilize an optical cavity while achieving a dynamic tuning range of over 100 MHz with a precision under 1 MHz. Our unique scheme uses a reference laser locked to an electro-optic modulator (EOM) shifted saturation absorption spectroscopy (SAS) signal. The cavity is locked to the PDH error signal obtained from the dip in the reflected intensity of this reference laser. Our setup provides the feature to efficiently tune the resonant frequency of the cavity by only changing the EOM drive without unlocking and re-locking either the reference laser or the cavity. We present measurements of precision control of the resonant cavity frequency and vacuum Rabi splitting (VRS) to quantify the stability achieved and hence show that this technique is suitable for a variety of cavity QED experiments.
The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of 1.011.011.01 rad and root-mean-square I/Q errors below 0.3 %0.3\ \%0.3 % over a carrier-frequency range of 350 MHz350~\mathrm{MHz}350 MHz to 1.75 GHz1.75~\mathrm{GHz}1.75 GHz. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.
Laser phase noise is one of the limiting factors that dictate gate fidelities and coherence times in trapped-ion quantum systems. Previous studies have reported that when the Rabi frequency of an ion qubit is close to the servo-bump phase-noise frequency, the driving laser limits the fidelity and coherence time. This issue has typically been mitigated by choosing a Rabi frequency outside the servo-bump region. However, this constrains the usable range of gate speeds and can limit the achievable fidelity. To address this issue, we developed an active phase-noise stabilization system for a barium-ion optical-qubit laser at 1762 nm, employing a fiber electro-optic modulator (EOM) with an electrical feedforward servo. Our results demonstrate that this setup, based on the Pound-Drever-Hall (PDH) feedforward method, can suppress servo-bump phase noise by 15 dB near the bump peak frequency in our locking system. The laser phase noise is analyzed using delayed self-heterodyne interferometry (DSHI). We further tested the stabilized laser on an optical qubit and observed a clear improvement in coherence time based on the measured amplitude decay of Rabi oscillations, even when the Rabi frequency lies within the servo-bump bandwidth. This technique can be readily adapted to other optical qubits with minimal modifications.
\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n