Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Engineering

Private correlated random bit generation based on multi-channel wideband chaos generation using optical frequency comb generation and parallel filtering

Yuehua An, Jiangwei Liu, Ziyang Ma, Zhitao Deng, Zhensen Gao

Published Jul 30, 2025• 0 citations
Publisher

Abstract

Correlated random bit generation (CRBG) plays an important role in secure communication, particularly for secure key distribution. In this work, we propose and numerically demonstrate a scheme of CRBG based on multi-channel broadband entropy sources and parallel filtering. In this scheme, a chaotic optical frequency comb generator is employed to produce a chaotic frequency comb with multi-channel low-correlated wideband chaos. Based on the commonly driven induced synchronization between two closed-loop distributed feedback lasers and chaotic frequency comb generation, synchronized multi-channel wideband chaos is achieved. Then, parallel filtering is implemented by utilizing an arrayed-waveguide grating to divide the chaotic frequency comb into multi-channel sub-carrier chaos with different wavelengths. To reduce the correlation among adjacent channels and improve the chaos complexity, beating frequency processing with different delay times among adjacent chaotic sub-carriers is performed to get several different sets of chaotic output, among which an enhanced bandwidth over 20 GHz and low correlations are obtained. Moreover, the correlation between the chaotic output and the driving signal can be further suppressed, indicating that the security of the scheme is guaranteed. Multi-channel high-speed CRBG with a total generation rate of 16 Gb/s is successfully achieved at two legitimate users after transmission, with the randomness of multi-channel correlated bit generation verified using a test suite from the National Institute of Standards and Technology. The proposed scheme may provide a way for high-speed multi-channel parallel correlated random bits based on commercial components, which could potentially find applications in future secure optical communication systems.

DOI
10.1117/1.oe.64.7.078103

Related papers

Key Space Enhanced Correlated Random Bit Generation Based on Synchronized Electro-Optic Self-Feedback Loops with Mach–Zehnder Modulators

Chuyun Huang, Xulin Gao, Sile Wu +5 more

With the widespread application of big data, the amount of data transmitted through optical networks has been increasing dramatically. Correlated random bit generation (CRBG) is one of the key technologies in secure communication systems to ensure security performance and transmission efficiency. We propose and demonstrate a CRBG scheme based on a Mach–Zehnder modulator (MZM) electro-optic feedback loop to improve the security and speed of communication systems. In this scheme, common-signal-induced synchronization is accomplished to generate wideband complex physical entropy sources, and a private hardware module is employed to perform post-processing and nonlinear transformation of the synchronized signal. The simulation results show that the effective bandwidth of the output chaotic signal is significantly increased to 27.76 GHz, and high-quality synchronization with a correlation coefficient of over 0.98 is reached. A high-rate CRBG of up to 5.3 Gb/s is successfully achieved between two synchronized wideband physical entropy sources, and the hardware key space is enhanced to ∼242, which greatly improves the privacy of physical entropy sources. The proposed scheme provides a promising approach for high-speed private CRBG, which is expected to be used in high-speed secure key distribution and optical communication systems.

Photonics•Dec 9, 2022•5 citations

Private correlated random bit generation based on synchronized wideband physical entropy sources with hybrid electro-optic nonlinear transformation

Zhensen Gao, Sile Wu, Zhitao Deng +6 more

We propose and experimentally demonstrate a novel, to the best of our knowledge, private correlated random bit generation (CRBG) scheme based on commonly driven induced synchronization of two wideband physical entropy sources, which employs an open-loop distributed feedback laser followed by a hybrid electro-optic nonlinear transformation hardware module for effective bandwidth expansion and privacy enhancement. A Mach-Zehnder interferometer followed by an electro-optic self-feedback phase modulation loop as well as a dispersion element are constructed as a private hardware module to perform post-processing and nonlinear transformation of the synchronized signal. A record high rate of 5.2-Gb/s CRBG is successfully achieved between two synchronized wideband physical entropy sources with an enhanced entropy source rate and hardware key space. The demonstrated scheme may provide a new way for CRBG in future high speed secure communication systems.

Optics Letters•Jul 1, 2022•7 citations

Correlated random bit generation based on common-signal-induced synchronization of wideband complex physical entropy sources

Anke Zhao, Ning Jiang, Yajun Wang +3 more

We propose and experimentally demonstrate a novel, to the best of our knowledge, correlated random bit generation (CRBG) scheme in virtue of the synchronization of two physical entropy sources that are composed of a continuous-wave laser, a phase modulator that is driven by the output of a local laser subject to constant-amplitude and random-phase (CARP) injection, as well as a dispersive component. It is experimentally indicated that wideband complex physical entropy sources with an effective bandwidth of 22 GHz can be achieved, and high-quality synchronization with a large cross-correlation coefficient (∼0.95) can be achieved by introducing symmetric CARP injections into the local lasers at Alice and Bob ends. Based on this, two distributed CRBSs with a bit rate over 3 Gb/s and satisfactory consistency are independently generated at Alice and Bob ends; the excellent randomness of CRBSs is verified using a test suite of the National Institute of Standards and Technology.

Optics Letters•Dec 5, 2019•18 citations

Scalable ultrafast random bit generation using wideband chaos-based entropy sources

Chin-Hao Tseng, Atsushi Uchida, Sheng Kwang Hwang

The exponential growth of data transmission and processing speeds in modern digital infrastructure requires entropy sources capable of producing large volumes of true randomness for information security. Chaotic emissions from semiconductor lasers are attractive in this context because of their fast dynamics and nonrepetitive behavior. Their spectral bandwidth, however, is typically limited to several tens of gigahertz, which constrains the achievable entropy rate and makes ultrafast random bit generation difficult without substantial post-processing. Here, we demonstrate a chaos-based entropy source that employs optical heterodyning between the chaotic emission from a semiconductor laser and an optical frequency comb, yielding a bandwidth exceeding 100 GHz and an experimentally verified single-channel entropy rate of 1.86 Tb/s. By directly extracting multiple bits from the digitized output of the entropy source, we achieve a single-channel random bit generation rate of 1.536 Tb/s, while four-channel parallelization reaches 6.144 Tb/s with no observable interchannel correlation. This linear scalability suggests that aggregate throughput could reach hundreds of terabits per second with additional parallel channels. The broadband, low-overhead photonic architecture presented here provides a viable route to real-time, ultrafast random bit generation with broad implications for secure communications, high-performance AI computing, and large-scale data analytics.

arXiv:2512.24716•Dec 31, 2025•2 citations

A Tbit/s parallel real-time physical random number scheme based on chaos optical frequency comb of Si3N4 micro-ring

Yongbo Wang, Xi Tang, Le-Han Zhao +7 more

Physical random numbers (PRNs) own various advantageous characteristics, including unpredictability, non-repeatability, higher security and reliability. Meanwhile, laser chaos has attracted great attention in the field of PRN. In terms of single channel PRN, laser chaos schemes can achieve a much higher bit-rate than traditional quantum PRN schemes. So far, various laser chaos PRN schemes have been discussed in order to enhance the performance of single channel laser chaos PRN. However, considering the limited bandwidth of laser chaos, especially the bandwidth of digital electronic circuit, the development potential of single channel PRN should be limited and may fall into the trap of high performance and expensive cost. Recently, the applications of multi-channel parallel PRN schemes have been developed. These parallel types may balance the high performance of PRN in a low cost. Recent progress indicates that chaotic micro-comb may have good potential. The micro-comb exhibits highly nonlinear and complex dynamic characteristics, and each comb tooth may show chaotic oscillation. The wavelength division multiplexing technology enables large-scale optical parallel output, providing the possiblity for large-scale parallel PRN generation. However, most of these PRN schemes are offline rather than true online and real-time random numbers. Thus, the development of real, online real-time parallel PRN solutions has great interest and research value in related fields. Herein we experimentally demonstrat an ultra-high-speed parallel real-time physical random number generator, which is achieved though the combination of chaotic micro-comb of chip-scale Si3N4 ultra-high Q micro-resonator and a high-speed field programmable gate array (FPGA). The results show that the Si3N4 ultra-high Q micro-resonator generates a micro-comb with hundreds of channels, each channel can route into an optically chaotic state, and become an excellent physical entropy source. Using FPGA onboard multi-bit analog-to-digital converter, the filtered optical chaos signal from the micro-comb is discretely sampled and quantized, and resulting in an 8-bit binary bitstream. Taking real-time self-delayed exclusive or (XOR) processing of bitstream and preserving 4 least significant bits, the qualified physical random bitstream with real-time 5 Gbits/s rate is realized experimentally. Considering that there are 294 chaotic comb teeths, our approach anticipates a throughput of 1.74 Tbits/s of real-time physical random bits. Our results could offer a new integrated and ultra-high-speed option for real-time physical random number sources.

Acta Physica Sinica•Jan 1, 2024•0 citations

Massively Parallel Physical Random Number Generation Using a Dual-output Brillouin Random Fiber Laser

Haozhe Li, Fei Wang, Tao Deng +1 more

High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).

Journal of Lightwave Technology•Jan 1, 2026•0 citations
Correlated random bit generation (CRBG) plays an important role in secure communication, particularly for secure key distribution. In this work, we propose and numerically demonstrate a scheme of CRBG based on multi-channel broadband entropy sources and parallel filtering. In this scheme, a chaotic optical frequency comb generator is employed to produce a chaotic frequency comb with multi-channel low-correlated wideband chaos. Based on the commonly driven induced synchronization between two closed-loop distributed feedback lasers and chaotic frequency comb generation, synchronized multi-channel wideband chaos is achieved. Then, parallel filtering is implemented by utilizing an arrayed-waveguide grating to divide the chaotic frequency comb into multi-channel sub-carrier chaos with different wavelengths. To reduce the correlation among adjacent channels and improve the chaos complexity, beating frequency processing with different delay times among adjacent chaotic sub-carriers is performed to get several different sets of chaotic output, among which an enhanced bandwidth over 20 GHz and low correlations are obtained. Moreover, the correlation between the chaotic output and the driving signal can be further suppressed, indicating that the security of the scheme is guaranteed. Multi-channel high-speed CRBG with a total generation rate of 16 Gb/s is successfully achieved at two legitimate users after transmission, with the randomness of multi-channel correlated bit generation verified using a test suite from the National Institute of Standards and Technology. The proposed scheme may provide a way for high-speed multi-channel parallel correlated random bits based on commercial components, which could potentially find applications in future secure optical communication systems.
With the widespread application of big data, the amount of data transmitted through optical networks has been increasing dramatically. Correlated random bit generation (CRBG) is one of the key technologies in secure communication systems to ensure security performance and transmission efficiency. We propose and demonstrate a CRBG scheme based on a Mach–Zehnder modulator (MZM) electro-optic feedback loop to improve the security and speed of communication systems. In this scheme, common-signal-induced synchronization is accomplished to generate wideband complex physical entropy sources, and a private hardware module is employed to perform post-processing and nonlinear transformation of the synchronized signal. The simulation results show that the effective bandwidth of the output chaotic signal is significantly increased to 27.76 GHz, and high-quality synchronization with a correlation coefficient of over 0.98 is reached. A high-rate CRBG of up to 5.3 Gb/s is successfully achieved between two synchronized wideband physical entropy sources, and the hardware key space is enhanced to ∼242, which greatly improves the privacy of physical entropy sources. The proposed scheme provides a promising approach for high-speed private CRBG, which is expected to be used in high-speed secure key distribution and optical communication systems.
We propose and experimentally demonstrate a novel, to the best of our knowledge, private correlated random bit generation (CRBG) scheme based on commonly driven induced synchronization of two wideband physical entropy sources, which employs an open-loop distributed feedback laser followed by a hybrid electro-optic nonlinear transformation hardware module for effective bandwidth expansion and privacy enhancement. A Mach-Zehnder interferometer followed by an electro-optic self-feedback phase modulation loop as well as a dispersion element are constructed as a private hardware module to perform post-processing and nonlinear transformation of the synchronized signal. A record high rate of 5.2-Gb/s CRBG is successfully achieved between two synchronized wideband physical entropy sources with an enhanced entropy source rate and hardware key space. The demonstrated scheme may provide a new way for CRBG in future high speed secure communication systems.
We propose and experimentally demonstrate a novel, to the best of our knowledge, correlated random bit generation (CRBG) scheme in virtue of the synchronization of two physical entropy sources that are composed of a continuous-wave laser, a phase modulator that is driven by the output of a local laser subject to constant-amplitude and random-phase (CARP) injection, as well as a dispersive component. It is experimentally indicated that wideband complex physical entropy sources with an effective bandwidth of 22 GHz can be achieved, and high-quality synchronization with a large cross-correlation coefficient (∼0.95) can be achieved by introducing symmetric CARP injections into the local lasers at Alice and Bob ends. Based on this, two distributed CRBSs with a bit rate over 3 Gb/s and satisfactory consistency are independently generated at Alice and Bob ends; the excellent randomness of CRBSs is verified using a test suite of the National Institute of Standards and Technology.
The exponential growth of data transmission and processing speeds in modern digital infrastructure requires entropy sources capable of producing large volumes of true randomness for information security. Chaotic emissions from semiconductor lasers are attractive in this context because of their fast dynamics and nonrepetitive behavior. Their spectral bandwidth, however, is typically limited to several tens of gigahertz, which constrains the achievable entropy rate and makes ultrafast random bit generation difficult without substantial post-processing. Here, we demonstrate a chaos-based entropy source that employs optical heterodyning between the chaotic emission from a semiconductor laser and an optical frequency comb, yielding a bandwidth exceeding 100 GHz and an experimentally verified single-channel entropy rate of 1.86 Tb/s. By directly extracting multiple bits from the digitized output of the entropy source, we achieve a single-channel random bit generation rate of 1.536 Tb/s, while four-channel parallelization reaches 6.144 Tb/s with no observable interchannel correlation. This linear scalability suggests that aggregate throughput could reach hundreds of terabits per second with additional parallel channels. The broadband, low-overhead photonic architecture presented here provides a viable route to real-time, ultrafast random bit generation with broad implications for secure communications, high-performance AI computing, and large-scale data analytics.
Physical random numbers (PRNs) own various advantageous characteristics, including unpredictability, non-repeatability, higher security and reliability. Meanwhile, laser chaos has attracted great attention in the field of PRN. In terms of single channel PRN, laser chaos schemes can achieve a much higher bit-rate than traditional quantum PRN schemes. So far, various laser chaos PRN schemes have been discussed in order to enhance the performance of single channel laser chaos PRN. However, considering the limited bandwidth of laser chaos, especially the bandwidth of digital electronic circuit, the development potential of single channel PRN should be limited and may fall into the trap of high performance and expensive cost. Recently, the applications of multi-channel parallel PRN schemes have been developed. These parallel types may balance the high performance of PRN in a low cost. Recent progress indicates that chaotic micro-comb may have good potential. The micro-comb exhibits highly nonlinear and complex dynamic characteristics, and each comb tooth may show chaotic oscillation. The wavelength division multiplexing technology enables large-scale optical parallel output, providing the possiblity for large-scale parallel PRN generation. However, most of these PRN schemes are offline rather than true online and real-time random numbers. Thus, the development of real, online real-time parallel PRN solutions has great interest and research value in related fields. Herein we experimentally demonstrat an ultra-high-speed parallel real-time physical random number generator, which is achieved though the combination of chaotic micro-comb of chip-scale Si3N4 ultra-high Q micro-resonator and a high-speed field programmable gate array (FPGA). The results show that the Si3N4 ultra-high Q micro-resonator generates a micro-comb with hundreds of channels, each channel can route into an optically chaotic state, and become an excellent physical entropy source. Using FPGA onboard multi-bit analog-to-digital converter, the filtered optical chaos signal from the micro-comb is discretely sampled and quantized, and resulting in an 8-bit binary bitstream. Taking real-time self-delayed exclusive or (XOR) processing of bitstream and preserving 4 least significant bits, the qualified physical random bitstream with real-time 5 Gbits/s rate is realized experimentally. Considering that there are 294 chaotic comb teeths, our approach anticipates a throughput of 1.74 Tbits/s of real-time physical random bits. Our results could offer a new integrated and ultra-high-speed option for real-time physical random number sources.
High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).