Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

Highly integrated color center creation with cooled hydrogenated molecules irradiation

Masatomi Iizawa, Yasuhito Narita

Published Jul 9, 2025• 1 citation
Publisher

Abstract

Abstract Photoluminescent point defects, such as nitrogen vacancy (NV) color centers in diamond, have attracted much attention as solid-state qubits. In recent years, a method has been developed to dope ions one-by-one into a solid substrate with Ångström position accuracy using a Paul trap. However, the dopant atoms must be laser-cooled, and the atoms that are promising dopants for solid-state quantum devices, such as nitrogen, cannot be directly applied. In the previous studies, the cooling of the dopant ions has been achieved using a sympathetic cooling technique, in which the laser-cooled atoms are sandwiched, but this method has several problems such as the need for a mechanism to remove the laser-cooled atoms and the inability to distinguish between the dopant atoms and contaminations. We show that these problems can be overcome by directly cooling the hydrogenated ions instead of sympathetically cooling the ions, and the position accuracy can be improved.

DOI
10.1140/epjqt/s40507-025-00379-6

Related papers

Development of Ultrahigh-precision Ion Implantation System Based on Laser-cooled Ion Source

Hosaka Koichi, Seiji Hosoya, Kashiwagi Hirotsugu +9 more

Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing [3-6]. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one. The QST system uses doubly charged ions cooled with calcium ions, allowing 100 keV ion implantation in diamond.

•Jul 29, 2025•0 citations

Laser-cooled ion source for an ultrahigh-precision single NV center creation

Hosaka Koichi, Iizawa Masatomi, Seiji Hosoya +13 more

Deterministic ion implantation and color-center creation methods at the nanometer scale provide a route towards scalable quantum information processing. For this purpose, we have developed an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one . Doubly charged nitrogen ions (N2+) produced in a sputter ion source is introduced into the LPT and sympathetically cooled with laser-cooled calcium ions (Ca+). Both the sputter ion source and the LPT chamber are elevated to +50kV for the 100keV-implantation of doubly charged single ions into a grounded diamond crystal.

•Jul 24, 2024•0 citations

Development of Ultrahigh-precision Ion Implantation System Connected with Laser-cooled Ion Source

Onoda Shinobu, Hosaka Koichi, Seiji Hosoya +9 more

Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one.

•May 12, 2025•0 citations

Color Centers in Diamond Fabricated by Ion and Electron beam for Quantum Technologies

Onoda Shinobu

A nitrogen vacancy (NV) center, which is a luminescent point defect based on substitutional nitrogen and neighbouring vacancy, is the most studied color centers in diamond. NV center is known as a solidstate spin quantum bit (qubit) at room temperature. NV-qubit is widely utilized for quantum sensors and quantum information processing, etc. In this talk, the recent progress of color center fabrication by electron irradiation and ion implantation will be discussed.

•Sep 4, 2023•0 citations

Local Position Control of NV Centers in Diamond by Combining of Picosecond Laser Irradiation and Nitrogen Ion Implantation

T. Kageura, D. Suzuki, Kawaguchi Ryo +2 more

Nitrogen-vacancy (NV) centers in diamond are attracting attention as quantum bits that can operate at room temperature and are expected to be applied in the fields of quantum sensing, quantum computing and quantum communication. Precise control of the position of NV centers especially within 10-1000 nm is essential for the realization of highly efficient single-photon sources using optical resonators and quantum memories. Until now, local NV center formation at arbitrary positions using electron beam lithography or femtosecond laser irradiation has been reported, but this is still an under-developed technology and there are still problems such as process complexity, cost and three-dimensional position control. In this study, we propose a precise three-dimensional NV formation position control method that combines picosecond lasers and ion implantation as a simpler and more economical method.

•May 12, 2025•0 citations

Photoactivation of Color Centers Induced by CW Laser Irradiation in Ion-Implanted Diamond

Vanna Pugliese, Elena Nieto Hernández, Emilio Corte +4 more

Split-vacancy color centers in diamonds are promising solid-state platforms for the implementation of photonic quantum technologies. These luminescent defects are commonly fabricated upon low-energy ion implantation and subsequent thermal annealing. Their technological uptake will require the availability of reliable methods for the controlled, large-scale production of localized individual photon emitters. This task is partially achieved by controlled ion implantation to introduce selected impurities in the host material and requires the development of challenging beam focusing or collimation procedures coupled with single-ion detection techniques. We report on the protocol for the direct optical activation of split-vacancy color centers in diamond via localized processing with a continuous-wave laser at mW optical powers. We demonstrate the activation of photoluminescent Mg- and Sn-related centers at both the ensemble and single-photon emitter levels in ion-implanted, high-purity diamond crystals without further thermal processing. The proposed lithographic method enables the activation of individual color centers at specific positions of a large-area sample by means of a relatively inexpensive equipment offering real-time, in situ monitoring of the process.

arXiv:2409.06359•ACS Photonics•Jul 1, 2025•7 citations
Abstract Photoluminescent point defects, such as nitrogen vacancy (NV) color centers in diamond, have attracted much attention as solid-state qubits. In recent years, a method has been developed to dope ions one-by-one into a solid substrate with Ångström position accuracy using a Paul trap. However, the dopant atoms must be laser-cooled, and the atoms that are promising dopants for solid-state quantum devices, such as nitrogen, cannot be directly applied. In the previous studies, the cooling of the dopant ions has been achieved using a sympathetic cooling technique, in which the laser-cooled atoms are sandwiched, but this method has several problems such as the need for a mechanism to remove the laser-cooled atoms and the inability to distinguish between the dopant atoms and contaminations. We show that these problems can be overcome by directly cooling the hydrogenated ions instead of sympathetically cooling the ions, and the position accuracy can be improved.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing [3-6]. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one. The QST system uses doubly charged ions cooled with calcium ions, allowing 100 keV ion implantation in diamond.
Deterministic ion implantation and color-center creation methods at the nanometer scale provide a route towards scalable quantum information processing. For this purpose, we have developed an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one . Doubly charged nitrogen ions (N2+) produced in a sputter ion source is introduced into the LPT and sympathetically cooled with laser-cooled calcium ions (Ca+). Both the sputter ion source and the LPT chamber are elevated to +50kV for the 100keV-implantation of doubly charged single ions into a grounded diamond crystal.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one.
Nitrogen-vacancy (NV) centers in diamond are attracting attention as quantum bits that can operate at room temperature and are expected to be applied in the fields of quantum sensing, quantum computing and quantum communication. Precise control of the position of NV centers especially within 10-1000 nm is essential for the realization of highly efficient single-photon sources using optical resonators and quantum memories. Until now, local NV center formation at arbitrary positions using electron beam lithography or femtosecond laser irradiation has been reported, but this is still an under-developed technology and there are still problems such as process complexity, cost and three-dimensional position control. In this study, we propose a precise three-dimensional NV formation position control method that combines picosecond lasers and ion implantation as a simpler and more economical method.
Split-vacancy color centers in diamonds are promising solid-state platforms for the implementation of photonic quantum technologies. These luminescent defects are commonly fabricated upon low-energy ion implantation and subsequent thermal annealing. Their technological uptake will require the availability of reliable methods for the controlled, large-scale production of localized individual photon emitters. This task is partially achieved by controlled ion implantation to introduce selected impurities in the host material and requires the development of challenging beam focusing or collimation procedures coupled with single-ion detection techniques. We report on the protocol for the direct optical activation of split-vacancy color centers in diamond via localized processing with a continuous-wave laser at mW optical powers. We demonstrate the activation of photoluminescent Mg- and Sn-related centers at both the ensemble and single-photon emitter levels in ion-implanted, high-purity diamond crystals without further thermal processing. The proposed lithographic method enables the activation of individual color centers at specific positions of a large-area sample by means of a relatively inexpensive equipment offering real-time, in situ monitoring of the process.