Nitrogen-vacancy (NV) centers in diamond are attracting attention as quantum bits that can operate at room temperature and are expected to be applied in the fields of quantum sensing, quantum computing and quantum communication. Precise control of the position of NV centers especially within 10-1000 nm is essential for the realization of highly efficient single-photon sources using optical resonators and quantum memories. Until now, local NV center formation at arbitrary positions using electron beam lithography or femtosecond laser irradiation has been reported, but this is still an under-developed technology and there are still problems such as process complexity, cost and three-dimensional position control. In this study, we propose a precise three-dimensional NV formation position control method that combines picosecond lasers and ion implantation as a simpler and more economical method.
Nitrogen-vacancy (NV) centers in diamond are attracting attention as quantum bits that can operate at room temperature and are expected to be applied in the fields of quantum sensing, quantum computing and quantum communication. Precise control of the position of NV centers especially within 10-1000 nm is essential for the realization of highly efficient single-photon sources using optical resonators and quantum memories. Until now, local NV center formation at arbitrary positions using electron beam lithography or femtosecond laser irradiation has been reported, but this is still an under-developed technology and there are still problems such as process complexity, cost and three-dimensional position control. In this study, we propose a precise three-dimensional NV formation position control method that combines picosecond lasers and ion implantation as a simpler and more economical method.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one.
We demonstrate three-dimensional localization of a single nitrogen-vacancy (NV) center in diamond by combining nitrogen doping during growth with a post-growth 12C implantation technique that facilitates vacancy formation in the crystal. We show that the NV density can be controlled by the implantation dose without necessitating increase of the nitrogen incorporation. By implanting a large 12C dose through nanoscale apertures, we can localize an individual NV center within a volume of (∼180 nm)3 at a deterministic position while repeatedly preserving a coherence time (T2) > 300 μs. This deterministic position control of coherent NV centers enables integration into NV-based nanostructures to realize scalable spin-sensing devices as well as coherent spin coupling mediated by photons and phonons.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing [3-6]. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one. The QST system uses doubly charged ions cooled with calcium ions, allowing 100 keV ion implantation in diamond.
Creating dense and shallow nitrogen-vacancy (NV) ensembles with good spin properties is a prerequisite for developing diamond-based quantum sensors exhibiting better performance. Ion implantation is a key enabling tool for precisely controlling spatial localization and density of NV color centers in diamond. However, it suffers from a low creation yield, while higher ion fluences significantly damage the crystal lattice. In this work, we realize N2+ ion implantation in the 30–40 keV range at high temperatures. At 800 °C, NV's ensemble photoluminescence emission is three to four times higher than room temperature implanted films, while narrow electron spin resonance linewidths of 1.5 MHz, comparable to well-established implantation techniques, are obtained. In addition, we found that ion fluences above 2 × 1014 ions/cm2 can be used without graphitization of the diamond film, in contrast to room temperature implantation. This study opens promising perspectives in optimizing diamond films with implanted NV ensembles that could be integrated into quantum sensing devices.
Abstract A novel creation procedure for the nitrogen-vacancy (NV) center in diamond is investigated. After shallow nitrogen implantation, a continuous-wave laser is used to induce NV formation, while simultaneously exciting fluorescence to enable live observation. Our investigations imply that a different mechanism than heat induced vacancy diffusion causes the formation of NV centers with this method and we suggest possible alternative pathways which could be responsible, based on the observed properties. Furthermore, we test the procedure for its capabilities for the controlled creation of single centers and show that the emergence of individual centers can be tracked, while achieving sub-micrometer spatial precision.
Precise control over the spatial distribution and charge state of nitrogen-vacancy (NV) centers in diamond is a key requirement for further advancing this platform in quantum sensing and photonic applications. Here, we investigate nitrogen ion implantation as a scalable method to engineer NV centers in bulk single-crystalline (SC) and a 5 μ m -thick polycrystalline (PC) diamond membrane. Nitrogen-doped regions (1–80 ppm) were fabricated using a 0.7 MeV ion beam and high-temperature annealing, with NV center formation verified by confocal fluorescence imaging and spectral analysis. In SC bulk diamond, we estimate the NV concentration from spectral analysis and model the fluorescence response as a function of implantation dose, capturing both the initial increase at low concentrations and a saturation behavior at higher doses due to quenching mechanisms. In contrast, PC diamond membranes show a weaker dependence at low implantation fluences, consistent with pre-existing nitrogen impurities, thus making a statistical model significantly more complex. The activation yield is found to be of order of 1%, which is lower than in N-rich diamond samples, as implanted N is predominantly interstitial. Photoluminescence spectroscopy indicates that NV 0 is the dominant charge state in both materials, with a laser-power-dependent redistribution between neutral and negative charge states. Optically detected magnetic resonance (ODMR) measurements in SC bulk diamond resolve the hyperfine structure and allow extraction of the dephasing time ( T 2 ∗ ), while in PC diamond membranes, where NV centers tend do form near the grain boundaries, the ODMR signals are observed but spectral resolution is currently limited by impurities, grain-dependent NV orientations, and photoluminescence background.