Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)

Assessment of IMU Quality Requirements in Integrated Quantum Inertial Navigation Systems

Benjamin Tennstedt, Steffen Schön

Published May 4, 2025• 0 citations
Publisher

Abstract

This work presents an approach to assess the quality requirements for classical inertial measurement units (IMU) used in conjunction with a cold atom interferometer (CAI) for application in a hybrid quantum inertial navigations system (QINS). Based on the steady state formulation of an extended Kalman filter used for the hybridization of CAI and IMU, a model for the sensitivity gain of the QINS over the classical IMU is developed. This sensitivity gain depends on the white noise density of the classical sensor, as well as the scale factor and the signal-to-noise ratio of the CAI. Using the example of a single hybridized accelerometer axis it can be shown that for each CAI setting, an optimal white noise density of the classical accelerometer exists for which the sensitivity gain of the QINS yields a maximum. The findings are applied to evaluate existing experimental assemblies.

DOI
10.1109/inertial63280.2025.11037122

Related papers

Atom Strapdown: Toward Integrated Quantum Inertial Navigation Systems

Benjamin Tennstedt, Ashwin Rajagopalan, Nicolai Ben Weddig +3 more

Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.

NAVIGATION Journal of the Institute of Navigation•Jan 1, 2023•15 citations

Navigation Error Analysis of Atom Interferometer Inertial Sensor

Christopher Jekeli

The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.

NAVIGATION Journal of the Institute of Navigation•Mar 1, 2005•107 citations

Atom Strapdown: High Rate Phase Shift Calculation for Atom Interferometer Inertial Sensors

Benjamin Tennstedt, Nicolai Ben Weddig, Steffen Schön +3 more

In this paper, an alternative technique to estimate the response of a cold atom interferometer (CAI) is presented. Using data of a conventional inertial measurement unit and the common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame. This enables a hybridisation of both systems. The sensor frame allows for an easier mathematical description of the interferometer measurement and makes integration into higher-level navigation systems possible. Equations for a hybrid IMU/CAI system with several arbitrarily placed sensor frames are stated, as well as a compressed Multi-Axis model, following current developments in chip scale atom interferometry. The atom strapdown is compared with another common hybridisation technique which utilizes convolution of accelerometer data with the interferometer response function. The comparison is supported by real data. The dynamic terms resulting from the transformation of the IMU frame into the sensor frame of the CAI are evaluated in simulations and further discussed. Finally, the implications of the findings for future hybrid quantum navigation systems are stated.

Proceedings of the Satellite Division's International Technical Meeting (Online)/Proceedings of the Satellite Division's International Technical Meeting (CD-ROM)•Oct 20, 2022•2 citations

Cold atom interferometry for inertial navigation sensors: Technology assessment: space and defence applications

Martino Travagnin

This report assesses the potential of gyroscopes and accelerometers based on cold atom interferometry (CAI) for space and defence applications, by analysing their strengths and weaknesses in comparison with devices based on other working principles. Indeed, it is widely recognized that quantum sensors based on atomic interferometry provide absolute measurements with the potential for high sensitivity and long-term stability. This last property is particularly valuable for accelerometers and gyroscopes to be used for inertial navigation, since it guarantees precise positioning without the need for frequent recalibrations, a shortcoming which affects several devices presently in use. \nHigh-performance inertial sensors play an important role both in space applications, where gyroscopes are widely used e.g. to orientate a satellite and its on-board communications and sensing equipment, and in defence, where gyroscopes and accelerometers constitute the core of the inertial measurement units to be used for autonomous navigation, e.g. in GNSS-denied conditions. The EU has a well-established role in space with the Copernicus and Galileo programmes, and a fledging but increasing involvement in the defence industry. An independent assessment of a quantum technology such as cold atom interferometry which may in time acquire a significant role in these fields is a precondition to advance well-grounded suggestions for EU policy initiatives.

•Jan 1, 2020•9 citations

Progress towards the development of a cold-atom inertial measurement unit for onboard applications

Jeanne Bernard, Malo Cadoret, Yannick Bidel +6 more

In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•May 8, 2022•4 citations

Technology development for hybrid quantum inertial sensing in space

Dennis Knoop, Isabel Alejandra Parga García, Marian Woltmann +2 more

Hybrid quantum inertial sensing is a strategy combining the absolute but slow measurement of acceleration possible with atom interferometry and the relative but fast measurement of classical inertial measurement units (IMU). By combining both technologies within a sensor fusion framework, their respective strengths can be exploited, paving the way to enable high performance inertial navigation for different application scenarios. This paper gives an overview of our design activities of a three axes hybrid quantum inertial sensor and a planned flight campaign including hyper- and micro-gravity on the Bremen GraviTower. Furthermore, our design efforts for a next generation sensor system, foreseen to be operated in space are described.

Photonics for Quantum (PfQ)•Jun 8, 2026•0 citations
This work presents an approach to assess the quality requirements for classical inertial measurement units (IMU) used in conjunction with a cold atom interferometer (CAI) for application in a hybrid quantum inertial navigations system (QINS). Based on the steady state formulation of an extended Kalman filter used for the hybridization of CAI and IMU, a model for the sensitivity gain of the QINS over the classical IMU is developed. This sensitivity gain depends on the white noise density of the classical sensor, as well as the scale factor and the signal-to-noise ratio of the CAI. Using the example of a single hybridized accelerometer axis it can be shown that for each CAI setting, an optimal white noise density of the classical accelerometer exists for which the sensitivity gain of the QINS yields a maximum. The findings are applied to evaluate existing experimental assemblies.
Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.
The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.
In this paper, an alternative technique to estimate the response of a cold atom interferometer (CAI) is presented. Using data of a conventional inertial measurement unit and the common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame. This enables a hybridisation of both systems. The sensor frame allows for an easier mathematical description of the interferometer measurement and makes integration into higher-level navigation systems possible. Equations for a hybrid IMU/CAI system with several arbitrarily placed sensor frames are stated, as well as a compressed Multi-Axis model, following current developments in chip scale atom interferometry. The atom strapdown is compared with another common hybridisation technique which utilizes convolution of accelerometer data with the interferometer response function. The comparison is supported by real data. The dynamic terms resulting from the transformation of the IMU frame into the sensor frame of the CAI are evaluated in simulations and further discussed. Finally, the implications of the findings for future hybrid quantum navigation systems are stated.
This report assesses the potential of gyroscopes and accelerometers based on cold atom interferometry (CAI) for space and defence applications, by analysing their strengths and weaknesses in comparison with devices based on other working principles. Indeed, it is widely recognized that quantum sensors based on atomic interferometry provide absolute measurements with the potential for high sensitivity and long-term stability. This last property is particularly valuable for accelerometers and gyroscopes to be used for inertial navigation, since it guarantees precise positioning without the need for frequent recalibrations, a shortcoming which affects several devices presently in use. \nHigh-performance inertial sensors play an important role both in space applications, where gyroscopes are widely used e.g. to orientate a satellite and its on-board communications and sensing equipment, and in defence, where gyroscopes and accelerometers constitute the core of the inertial measurement units to be used for autonomous navigation, e.g. in GNSS-denied conditions. The EU has a well-established role in space with the Copernicus and Galileo programmes, and a fledging but increasing involvement in the defence industry. An independent assessment of a quantum technology such as cold atom interferometry which may in time acquire a significant role in these fields is a precondition to advance well-grounded suggestions for EU policy initiatives.
In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.
Hybrid quantum inertial sensing is a strategy combining the absolute but slow measurement of acceleration possible with atom interferometry and the relative but fast measurement of classical inertial measurement units (IMU). By combining both technologies within a sensor fusion framework, their respective strengths can be exploited, paving the way to enable high performance inertial navigation for different application scenarios. This paper gives an overview of our design activities of a three axes hybrid quantum inertial sensor and a planned flight campaign including hyper- and micro-gravity on the Bremen GraviTower. Furthermore, our design efforts for a next generation sensor system, foreseen to be operated in space are described.