Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

NAVIGATION Journal of the Institute of Navigation

Atom Strapdown: Toward Integrated Quantum Inertial Navigation Systems

Benjamin Tennstedt, Ashwin Rajagopalan, Nicolai Ben Weddig, Sven Abend, Steffen Schön, Ernst Maria Rasel

Published Jan 1, 2023• 15 citations
Publisher

Abstract

Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.

DOI
10.33012/navi.604

Related papers

Atom Strapdown: High Rate Phase Shift Calculation for Atom Interferometer Inertial Sensors

Benjamin Tennstedt, Nicolai Ben Weddig, Steffen Schön +3 more

In this paper, an alternative technique to estimate the response of a cold atom interferometer (CAI) is presented. Using data of a conventional inertial measurement unit and the common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame. This enables a hybridisation of both systems. The sensor frame allows for an easier mathematical description of the interferometer measurement and makes integration into higher-level navigation systems possible. Equations for a hybrid IMU/CAI system with several arbitrarily placed sensor frames are stated, as well as a compressed Multi-Axis model, following current developments in chip scale atom interferometry. The atom strapdown is compared with another common hybridisation technique which utilizes convolution of accelerometer data with the interferometer response function. The comparison is supported by real data. The dynamic terms resulting from the transformation of the IMU frame into the sensor frame of the CAI are evaluated in simulations and further discussed. Finally, the implications of the findings for future hybrid quantum navigation systems are stated.

Proceedings of the Satellite Division's International Technical Meeting (Online)/Proceedings of the Satellite Division's International Technical Meeting (CD-ROM)•Oct 20, 2022•2 citations

Navigation Error Analysis of Atom Interferometer Inertial Sensor

Christopher Jekeli

The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.

NAVIGATION Journal of the Institute of Navigation•Mar 1, 2005•107 citations

Assessment of IMU Quality Requirements in Integrated Quantum Inertial Navigation Systems

Benjamin Tennstedt, Steffen Schön

This work presents an approach to assess the quality requirements for classical inertial measurement units (IMU) used in conjunction with a cold atom interferometer (CAI) for application in a hybrid quantum inertial navigations system (QINS). Based on the steady state formulation of an extended Kalman filter used for the hybridization of CAI and IMU, a model for the sensitivity gain of the QINS over the classical IMU is developed. This sensitivity gain depends on the white noise density of the classical sensor, as well as the scale factor and the signal-to-noise ratio of the CAI. Using the example of a single hybridized accelerometer axis it can be shown that for each CAI setting, an optimal white noise density of the classical accelerometer exists for which the sensitivity gain of the QINS yields a maximum. The findings are applied to evaluate existing experimental assemblies.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•May 4, 2025•0 citations

Could cold atom interferometry sensors be the future inertial sensors? — First simulation results

Mohamed Bochkati, Steffen Schön, Dennis Schlippert +2 more

Quantum technology have attracted strong interest in recent years thanks to its extreme sensitivity to inertial forces and its strong immunity to drifts compared to conventional mechanical sensors. This paper introduces cold atom sensors as six-axis inertial sensors from the engineering point of view. In order to highlight the potential of this technology as needed for inertial navigation, a strapdown closed-loop-simulation has been developed. Furthermore, we present an error model for quantum sensors that includes terms such as quantum shot noise and phase noise of the reference laser. Considering this inherent stochastic characteristics, we made also a comparison with other conventional inertial measurement units. The analysis shows that quantum sensors with the same sensitivity as of for static measuring local gravity can determine their position with accuracy of one-meter level even after one hour, while other quantum sensors with less sensitivity exhibit for the same duration an amplitude up to 1 km, similar to conventional sensors.

DGON Inertial Sensors and Systems (ISS)•Sep 1, 2017•10 citations

Progress towards the development of a cold-atom inertial measurement unit for onboard applications

Jeanne Bernard, Malo Cadoret, Yannick Bidel +6 more

In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•May 8, 2022•4 citations

A Cold-Atom Strapdown Inertial Unit Guided by the Transit Law

William Alexander Aldred

Inertial navigation integrates acceleration and rotation into position, and its accuracy is the accuracy of its sensors' biases. Atom interferometers measure both quantities against atomic constants, with biases that do not drift like those of mechanical or optical gyroscopes. This paper designs a strapdown cold-atom inertial unit and computes its sensitivity. With an interrogation time of 0.25 s and an atom flux of one million per shot, the acceleration sensitivity is 0.1 microgal per root hertz and the rotation sensitivity 9.94e-08 rad per second per root hertz. A transit-law scheduling scheme sequences the unit's measurements along the trajectory so that bias estimation and map aiding combine optimally. The unit is a simulated design; no atoms were interfered in its preparation.

•Nov 11, 2026•1 citation
Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.
In this paper, an alternative technique to estimate the response of a cold atom interferometer (CAI) is presented. Using data of a conventional inertial measurement unit and the common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame. This enables a hybridisation of both systems. The sensor frame allows for an easier mathematical description of the interferometer measurement and makes integration into higher-level navigation systems possible. Equations for a hybrid IMU/CAI system with several arbitrarily placed sensor frames are stated, as well as a compressed Multi-Axis model, following current developments in chip scale atom interferometry. The atom strapdown is compared with another common hybridisation technique which utilizes convolution of accelerometer data with the interferometer response function. The comparison is supported by real data. The dynamic terms resulting from the transformation of the IMU frame into the sensor frame of the CAI are evaluated in simulations and further discussed. Finally, the implications of the findings for future hybrid quantum navigation systems are stated.
The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.
This work presents an approach to assess the quality requirements for classical inertial measurement units (IMU) used in conjunction with a cold atom interferometer (CAI) for application in a hybrid quantum inertial navigations system (QINS). Based on the steady state formulation of an extended Kalman filter used for the hybridization of CAI and IMU, a model for the sensitivity gain of the QINS over the classical IMU is developed. This sensitivity gain depends on the white noise density of the classical sensor, as well as the scale factor and the signal-to-noise ratio of the CAI. Using the example of a single hybridized accelerometer axis it can be shown that for each CAI setting, an optimal white noise density of the classical accelerometer exists for which the sensitivity gain of the QINS yields a maximum. The findings are applied to evaluate existing experimental assemblies.
Quantum technology have attracted strong interest in recent years thanks to its extreme sensitivity to inertial forces and its strong immunity to drifts compared to conventional mechanical sensors. This paper introduces cold atom sensors as six-axis inertial sensors from the engineering point of view. In order to highlight the potential of this technology as needed for inertial navigation, a strapdown closed-loop-simulation has been developed. Furthermore, we present an error model for quantum sensors that includes terms such as quantum shot noise and phase noise of the reference laser. Considering this inherent stochastic characteristics, we made also a comparison with other conventional inertial measurement units. The analysis shows that quantum sensors with the same sensitivity as of for static measuring local gravity can determine their position with accuracy of one-meter level even after one hour, while other quantum sensors with less sensitivity exhibit for the same duration an amplitude up to 1 km, similar to conventional sensors.
In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.
Inertial navigation integrates acceleration and rotation into position, and its accuracy is the accuracy of its sensors' biases. Atom interferometers measure both quantities against atomic constants, with biases that do not drift like those of mechanical or optical gyroscopes. This paper designs a strapdown cold-atom inertial unit and computes its sensitivity. With an interrogation time of 0.25 s and an atom flux of one million per shot, the acceleration sensitivity is 0.1 microgal per root hertz and the rotation sensitivity 9.94e-08 rad per second per root hertz. A transit-law scheduling scheme sequences the unit's measurements along the trajectory so that bias estimation and map aiding combine optimally. The unit is a simulated design; no atoms were interfered in its preparation.