We present an on-chip cold atom inertial sensor based on a Ramsey sequence configured to measure acceleration. Cold atom interferometers are of great interest due to their excellent stability and sensitivity to inertial effects. Atom chips enable a drastic size reduction of the sensor by trapping atoms during the whole measurement. During the interferometry sequence, we create a superposition of two atomic states and spatially split them, rendering the device sensitive to acceleration. We give the current noise budget at Allan deviation first point for our on-chip accelerometer.
We present an on-chip cold atom inertial sensor based on a Ramsey sequence configured to measure acceleration. Cold atom interferometers are of great interest due to their excellent stability and sensitivity to inertial effects. Atom chips enable a drastic size reduction of the sensor by trapping atoms during the whole measurement. During the interferometry sequence, we create a superposition of two atomic states and spatially split them, rendering the device sensitive to acceleration. We give the current noise budget at Allan deviation first point for our on-chip accelerometer.
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.
Positioning currently relies heavily on Global Navigation Satellite Systems (GNSS). Combined with classical accelerometers and gyroscopes, precise determination of orientation and position at any given time become available. However, but the availability of GNSS (e.g. GPS) is limited and not guaranteed at all times.In this paper we present an alternative based on atom interferometry using cold atom ensembles. An inertial sensor based on cold atoms allows, in theory, for nearly drift-free measurements of inertial forces with accuracies unreached by classical sensors, but the technology is still locked away in large physics laboratories [1].This paper introduces a compact device called SECAMP, which is capable of cooling atoms down to μ-Kelvin. SECAMP has the potential to measure inertial acceleration in three degrees of freedom. In the following, we present the current experimental setup of the apparatus and outline the next steps for the inertial sensor.
Atom chip based interferometry holds signicant promise for embedded precise measurements of time, accelerations, rotations, and magnetic fields. It can enable compact sensors for various carriers like planes, boats, and drones, making it advantageous for navigation applications. When measuring acceleration with a cold atom interferometer, it is necessary to separate the two states during the interferometry sequence. Microwave dressed potentials generated from CPWs within a magnetic trap are one approach to achieve such on-chip manipulation. Two specic challenges arise in this process. First, the microwave field emitted by a waveguide introduces an AC Zeeman shifts, leading to a bias phase in the interferometer output. Precise determination of this bias is necessary for accurate parameter readout. Second, positioning the atom trap accurately between the two waveguides is crucial to obtain the necessary symmetry during separation; otherwise, the contrast of the interferometer is signicantly reduced. To address these challenges, we present a method for measuring AC Zeeman shifts using Ramsey interferometry.
The exquisite precision of atom interferometers has sparked the interest of a large community for uses ranging from fundamental physics to geodesy and inertial navigation. However, their implementation for onboard applications is still limited, not least because rotation and acceleration are intertwined in a single phase shift, which makes the extraction of a useful signal more challenging. Moreover, the spatial separation of the wave packets due to rotations leads to a loss of signal. We present an atom interferometer operating over a large range of random angles, rotation rates and accelerations. A model of the expected phase shift allows us to untangle the rotation and acceleration signals. We also implement a real-time compensation system using fiber-optic gyroscopes and a rotating reference mirror to maintain the full contrast of the interferometer. We demonstrate a single-shot sensitivity to acceleration of 24 μg for rotation rates reaching 14° s−1. Cold atoms inertial sensors offer great precision and sensitivity, yet their use in mobile applications has been hindered by the effects of rotations on their measurements. Here, authors demonstrate an atom interferometer operating over a wide range of orientations and rotation rates, thanks to hybridisation with accelerometers and gyroscopes.
The use of atom interferometers in inertial systems holds the promise of improvement of several orders of magnitude in sensitivity over sensors using current technology such as micro-electro-mechanical (MEMS) devices or ring laser gyroscopes (RLGs). This paper describes the construction and characterization of an atomic interferometry system for eventual use in a dual-atom-beam accelerometer/gyroscope sensor. In contrast with current state-of-the-art atomic sensors which use pulsed cold atom sources and pulsed laser beams, the investigated apparatus relies purely on continuous atomic and laser beams. These differences can result in a sensor with reduced complexity, a smaller physical footprint, and reduced power consumption. However, these differences also introduce challenges resulting from laser and atomic beam divergences and from velocity averaging due to both longitudinal and transverse velocity spreads. In this work, we characterize our rubidium-based atom beam system and show that Ramsey-style interference can still be observed. The implications for future research are also outlined and discussed.