Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics

Transportable and Ultra-Stable Laser System for 133Cs Rydberg Excitation

Zhongxiao Xu, Changtao Zhao, Donghao Li

Published Jun 3, 2025• 0 citations
Publisher

Abstract

Recent progress in Rydberg atoms has enabled a wide range of applications in quantum sensing and quantum computation. In these applications, ultra-stable optical reference systems are essential to meet the requirements of a narrow linewidth and low technical noise. However, most existing systems are confined to laboratory settings and are not suitable for measurement-site-independent applications, such as external electric field sensors. This paper presents a transportable ultra-stable optical reference system for Rydberg excitation. The system is based on a 10 cm long ultra-low-expansion glass optical cavity, and it achieves finesse values of 410 k (at 1018 nm) and 200 k (at 852 nm). After being assembled in the experimental environment, it can still operate with only minor adjustments even after being transported over 400 km. Thanks to its vibration-insensitive design, two-stage temperature control, and hybrid locking unit, the system can maintain its locking status for up to 2 h.

DOI
10.3390/photonics12060559

Related papers

Sub-kilohertz excitation lasers for quantum information processing with Rydberg atoms

Remy Legaie, Craig Picken, Jonathan D. Pritchard

Quantum information processing using atomic qubits requires narrow linewidth lasers with long-term stability for high fidelity coherent manipulation of Rydberg states. In this paper, we report on the construction and characterization of three continuous-wave (CW) narrow linewidth lasers stabilized simultaneously to an ultra-high finesse Fabry-Perot cavity made of ultra-low expansion (ULE) glass, with a tunable offset-lock frequency. One laser operates at 852~nm while the two locked lasers at 1018~nm are frequency doubled to 509~nm for excitation of $^{133}$Cs atoms to Rydberg states. The optical beatnote at 509~nm is measured to be 260(5)~Hz. We present measurements of the offset between the atomic and cavity resonant frequencies using electromagnetically induced transparency (EIT) for high-resolution spectroscopy on a cold atom cloud. The long-term stability is determined from repeated spectra over a period of 20 days yielding a linear frequency drift of $\sim1$~Hz/s.

arXiv:1711.02645•Journal of the Optical Society of America B•Mar 21, 2018•38 citations

A custom-built high-finesse reference cavity for cold Rydberg atom excitation

Jun-Ren Chen, Monal Yu-Hsuan Chang, Yi-Wei Liu

We present a custom-built ultra-low expansion (ULE) cavity system designed for high-precision laser frequency stabilization. The cavity mirrors are bonded to the ULE spacer using a low thermal expansion adhesive, and the assembled cavity exhibits a finesse of nearly $$3 \times 10^{4}$$ . A custom-designed multilayer aluminum housing was developed to passively isolate the cavity from environmental fluctuations. Long-term performance characterization reveals a frequency drift of approximately 164 kHz per day. After locking a diode laser to the cavity using the Pound-Drever-Hall technique, we achieve a linewidth of approximately $$19.4~\text {kHz}$$ and a fractional frequency stability of $$6.4 \times 10^{-13}$$ at 1 s. To validate the reliability of this frequency-stabilized laser system, we applied it to Rydberg excitation spectroscopy via trap-loss measurements of cold $$ ^{{87}} {\text{Rb}} $$ atoms. While the introduction of a custom intermediate circuit (I.C.) already reduces the linewidth from 34 to 6 MHz, cavity locking further suppresses frequency fluctuations, as evidenced by the enhanced stability in the trap-loss signal. Our system offers a robust and cost-effective solution for high-resolution spectroscopy, with applications in coherent control of Rydberg atoms.

Applied Physics B•Jul 29, 2025•1 citation

High-power injection-locked blue laser for Rydberg atom-based sensing

Xiaoliang Zuo, Qingbin Li, Danyang Li +3 more

A compact, high-power, and stable blue laser source is essential for Rydberg state excitation of rubidium (Rb) atoms, particularly for emerging Rydberg atom-based sensors that require portability for practical applications. In this work, we present an injection-locked laser system using blue laser diodes for both the leader and follower lasers near 480 nm, enabling efficient Rydberg state preparation of Rb and eliminating the need for nonlinear frequency-doubling. The locked follower laser delivers 263 mW of output power with a linewidth of 591(31) kHz after frequency stabilization. High-efficiency spatial mode matching between the seed light and follower laser is accomplished through a polarization-maintaining fiber, resulting in a power gain of 30.4 dB. The compact optical path design allows the laser system to occupy just 20 × 21 × 4 cm 3 . Such a high-power and compact injection-locked blue laser system provides a low-cost and efficient solution for Rydberg atom-based applications.

Optics Express•Jun 17, 2025•3 citations

Ultra-low noise laser systems for quantum sensing, computing, and precision metrology

Michele Giunta, Murtaza Ali Khan, Evgeny A. Savelyev +10 more

Quantum technologies, spanning from sensing and metrology to simulations and computing, rely upon precise and low noise laser systems. Currently, we are witnessing a paradigm shift, where laboratory-based experiments are engineered such to develop reliable operating devices. The goal of providing continuous operation is key to enable their deployment for, e.g., PNT applications or cloud-based quantum computing services. Ultra-low noise laser systems are becoming integral part of these quantum devices due to their pivotal role in the effective functioning of the physics package. In fact, the performance are fundamentally linked to the noise properties of the driving laser fields, imposing the need of a careful choice of the appropriate sources, their spectral properties, and their stabilization. Here we present some of our recent ultra-stable laser system engineered for enabling several applications, we will describe ultra-stable comb and laser systems for quantum computing using neutral Yb, Sr, Rb, or Cs atoms, electric field sensing with Rydberg Rb atoms, and portable compact comb systems to enable uninterrupted operation of optical clocks in the field. A detailed noise analysis of the systems will be presented.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•0 citations

Comb-assisted ultrastable laser system for quantum technologies

Michele Giunta, Martin Wolferstetter, Nikolai Lilienfein +5 more

Quantum technologies are nowadays emerging as enabling tools for practical applications, such as quantum sensing, quantum computing and quantum metrology. Lasers play a central role in many of these technological platforms, e.g. for atomic clocks, ion-based or neutral atom-based quantum computers or atom interferometers. Here we present a complete laser system to cool, trap and control strontium atoms in an optical lattice or in tweezer arrays. A sub-Hz linewidth master laser, locked to a high-finesse optical cavity provides the frequency reference for an ultra-low noise comb. The rack-mounted laser system consists of all cooling, repumping, and clock lasers stabilized to the optical frequency comb. Each of the involved laser frequencies can therefore be tuned and mapped in the frequency domain with a high degree of stability. The system is controlled via a software interface, allowing to operate the cold-atom-based physics package autonomously. The system is tailored for the operation of 88Sr or 87Sr optical lattice clocks, or for quantum computing applications, but other sub-Hz lasers could be obtained by phase locking additional clock laser frequencies to the ultra-stable comb, enabling convenient and accurate optical frequency ratio measurements. The laser system architecture and the relevant characterization measurements will be presented, proposing some user-cases such as quantum computing and atom interferometry on strontium atoms. This represents a technological leap for quantum optics, allowing to explore further applications of quantum sensors outside a traditional lab.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•1 citation

Transportable interrogation laser system with an instability of mod σy = 3 × 10−16

Sebastian Häfner, Sofia Herbers, Stefan Vogt +2 more

We present an interrogation laser system for a transportable strontium lattice clock operating at 698 nm, which is based on an ultra-low-expansion glass reference cavity. Transportability is achieved by implementing a rigid, compact, and vibration insensitive mounting of the 12 cm-long reference cavity, sustaining shocks of up to 50 g. The cavity is mounted at optimized support points that independently constrain all degrees of freedom. This mounting concept is especially beneficial for cavities with a ratio of length L over diameter D L/D > 1. Generally, large L helps to reduce thermal noise-induced laser frequency instability while small D leads to small cavity volume. The frequency instability was evaluated, reaching its thermal noise floor of mod σy ≈ 3 × 10−16 for averaging times between 0.5 s and 10 s. The laser system was successfully operated during several field studies.

arXiv:2003.02766•Optics Express•Apr 24, 2020•39 citations
Recent progress in Rydberg atoms has enabled a wide range of applications in quantum sensing and quantum computation. In these applications, ultra-stable optical reference systems are essential to meet the requirements of a narrow linewidth and low technical noise. However, most existing systems are confined to laboratory settings and are not suitable for measurement-site-independent applications, such as external electric field sensors. This paper presents a transportable ultra-stable optical reference system for Rydberg excitation. The system is based on a 10 cm long ultra-low-expansion glass optical cavity, and it achieves finesse values of 410 k (at 1018 nm) and 200 k (at 852 nm). After being assembled in the experimental environment, it can still operate with only minor adjustments even after being transported over 400 km. Thanks to its vibration-insensitive design, two-stage temperature control, and hybrid locking unit, the system can maintain its locking status for up to 2 h.
Quantum information processing using atomic qubits requires narrow linewidth lasers with long-term stability for high fidelity coherent manipulation of Rydberg states. In this paper, we report on the construction and characterization of three continuous-wave (CW) narrow linewidth lasers stabilized simultaneously to an ultra-high finesse Fabry-Perot cavity made of ultra-low expansion (ULE) glass, with a tunable offset-lock frequency. One laser operates at 852~nm while the two locked lasers at 1018~nm are frequency doubled to 509~nm for excitation of 133^{133}133Cs atoms to Rydberg states. The optical beatnote at 509~nm is measured to be 260(5)~Hz. We present measurements of the offset between the atomic and cavity resonant frequencies using electromagnetically induced transparency (EIT) for high-resolution spectroscopy on a cold atom cloud. The long-term stability is determined from repeated spectra over a period of 20 days yielding a linear frequency drift of ∼1\sim1∼1~Hz/s.
We present a custom-built ultra-low expansion (ULE) cavity system designed for high-precision laser frequency stabilization. The cavity mirrors are bonded to the ULE spacer using a low thermal expansion adhesive, and the assembled cavity exhibits a finesse of nearly 3×1043 \times 10^{4}3×104 . A custom-designed multilayer aluminum housing was developed to passively isolate the cavity from environmental fluctuations. Long-term performance characterization reveals a frequency drift of approximately 164 kHz per day. After locking a diode laser to the cavity using the Pound-Drever-Hall technique, we achieve a linewidth of approximately 19.4 kHz19.4~\text {kHz}19.4 kHz and a fractional frequency stability of 6.4×10−136.4 \times 10^{-13}6.4×10−13 at 1 s. To validate the reliability of this frequency-stabilized laser system, we applied it to Rydberg excitation spectroscopy via trap-loss measurements of cold 87Rb ^{{87}} {\text{Rb}} 87Rb atoms. While the introduction of a custom intermediate circuit (I.C.) already reduces the linewidth from 34 to 6 MHz, cavity locking further suppresses frequency fluctuations, as evidenced by the enhanced stability in the trap-loss signal. Our system offers a robust and cost-effective solution for high-resolution spectroscopy, with applications in coherent control of Rydberg atoms.
A compact, high-power, and stable blue laser source is essential for Rydberg state excitation of rubidium (Rb) atoms, particularly for emerging Rydberg atom-based sensors that require portability for practical applications. In this work, we present an injection-locked laser system using blue laser diodes for both the leader and follower lasers near 480 nm, enabling efficient Rydberg state preparation of Rb and eliminating the need for nonlinear frequency-doubling. The locked follower laser delivers 263 mW of output power with a linewidth of 591(31) kHz after frequency stabilization. High-efficiency spatial mode matching between the seed light and follower laser is accomplished through a polarization-maintaining fiber, resulting in a power gain of 30.4 dB. The compact optical path design allows the laser system to occupy just 20 × 21 × 4 cm 3 . Such a high-power and compact injection-locked blue laser system provides a low-cost and efficient solution for Rydberg atom-based applications.
Quantum technologies, spanning from sensing and metrology to simulations and computing, rely upon precise and low noise laser systems. Currently, we are witnessing a paradigm shift, where laboratory-based experiments are engineered such to develop reliable operating devices. The goal of providing continuous operation is key to enable their deployment for, e.g., PNT applications or cloud-based quantum computing services. Ultra-low noise laser systems are becoming integral part of these quantum devices due to their pivotal role in the effective functioning of the physics package. In fact, the performance are fundamentally linked to the noise properties of the driving laser fields, imposing the need of a careful choice of the appropriate sources, their spectral properties, and their stabilization. Here we present some of our recent ultra-stable laser system engineered for enabling several applications, we will describe ultra-stable comb and laser systems for quantum computing using neutral Yb, Sr, Rb, or Cs atoms, electric field sensing with Rydberg Rb atoms, and portable compact comb systems to enable uninterrupted operation of optical clocks in the field. A detailed noise analysis of the systems will be presented.
Quantum technologies are nowadays emerging as enabling tools for practical applications, such as quantum sensing, quantum computing and quantum metrology. Lasers play a central role in many of these technological platforms, e.g. for atomic clocks, ion-based or neutral atom-based quantum computers or atom interferometers. Here we present a complete laser system to cool, trap and control strontium atoms in an optical lattice or in tweezer arrays. A sub-Hz linewidth master laser, locked to a high-finesse optical cavity provides the frequency reference for an ultra-low noise comb. The rack-mounted laser system consists of all cooling, repumping, and clock lasers stabilized to the optical frequency comb. Each of the involved laser frequencies can therefore be tuned and mapped in the frequency domain with a high degree of stability. The system is controlled via a software interface, allowing to operate the cold-atom-based physics package autonomously. The system is tailored for the operation of 88Sr or 87Sr optical lattice clocks, or for quantum computing applications, but other sub-Hz lasers could be obtained by phase locking additional clock laser frequencies to the ultra-stable comb, enabling convenient and accurate optical frequency ratio measurements. The laser system architecture and the relevant characterization measurements will be presented, proposing some user-cases such as quantum computing and atom interferometry on strontium atoms. This represents a technological leap for quantum optics, allowing to explore further applications of quantum sensors outside a traditional lab.
We present an interrogation laser system for a transportable strontium lattice clock operating at 698 nm, which is based on an ultra-low-expansion glass reference cavity. Transportability is achieved by implementing a rigid, compact, and vibration insensitive mounting of the 12 cm-long reference cavity, sustaining shocks of up to 50 g. The cavity is mounted at optimized support points that independently constrain all degrees of freedom. This mounting concept is especially beneficial for cavities with a ratio of length L over diameter D L/D > 1. Generally, large L helps to reduce thermal noise-induced laser frequency instability while small D leads to small cavity volume. The frequency instability was evaluated, reaching its thermal noise floor of mod σy ≈ 3 × 10−16 for averaging times between 0.5 s and 10 s. The laser system was successfully operated during several field studies.