For integrated circuit design, optimizing circuit parameters is crucial to achieve wide operating margins and high yields, even in the presence of fluctuations and variations in device characteristics. In this paper, we report the development of a new circuit parameter optimization tool for superconductor integrated circuits, leveraging the latest analog circuit simulator and the center of gravity method. The developed optimization tool, implemented in C++, utilizes a parallel processing algorithm for highspeed optimization. By using only the phase information of the Josephson junction to distinguish the correct behavior of the circuit, this tool can be applied not only to conventional single flux quantum (SFQ) circuits but also to superconductor circuits whose behavior is not based on a 2π phase change. We optimized several SFQ logic gates and compared the margin expansion and optimization time with conventional optimization tools. Our tool achieved an optimization time of less than 2% of that of conventional tools in most cases. This optimization tool facilitates the rapid parameter optimization of any superconductor circuits containing various types of Josephson junctions.
For integrated circuit design, optimizing circuit parameters is crucial to achieve wide operating margins and high yields, even in the presence of fluctuations and variations in device characteristics. In this paper, we report the development of a new circuit parameter optimization tool for superconductor integrated circuits, leveraging the latest analog circuit simulator and the center of gravity method. The developed optimization tool, implemented in C++, utilizes a parallel processing algorithm for highspeed optimization. By using only the phase information of the Josephson junction to distinguish the correct behavior of the circuit, this tool can be applied not only to conventional single flux quantum (SFQ) circuits but also to superconductor circuits whose behavior is not based on a 2π phase change. We optimized several SFQ logic gates and compared the margin expansion and optimization time with conventional optimization tools. Our tool achieved an optimization time of less than 2% of that of conventional tools in most cases. This optimization tool facilitates the rapid parameter optimization of any superconductor circuits containing various types of Josephson junctions.
We report optimization of half-flux-quantum (HFQ) circuits composed of SQUIDs containing conventional Josephson junctions and π-shift magnetic Josephson junctions. The SQUID can act as a Josephson junction with an extremely small critical current and be easily switched by a weak driving force with the assistance of the circulating current that is induced due to the π-shift and quantization conditions. It leads to a drastic reduction of both static and dynamic power consumption. However, the parameter margins of the HFQ circuits obtained so far is narrow compared with conventional single-flux-quantum circuits. Since HFQ circuits use many circuit elements and require the two junctions in the SQUID to switch alternately and symmetrically, circuit parameter optimization is much more difficult. In this study, we developed an optimization tool for HFQ circuits, including operation judgment and margin calculation. We improved the critical margin of the HFQ Josephson transmission line to 39%. We also optimized the HFQ splitter, confluence buffer, and D flip-flop. We discuss design guidelines for HFQ circuits based on our systematic exploration of the optimized circuit parameter sets. We suggest that the optimized loop inductances are around 0.5 and 1.5 of Φ0/2 for data transmission and storage, respectively.
A high-Tcsuperconducting (HTS) single-flux-quantum (SFQ) logic family including an and gate, an or gate, and an inverter was designed. The circuit parameters were optimized for a Josephson junction's critical current density, which may change due to a temperature change or insufficient run-to-run reproducibility of the fabrication process. New circuit design layout rules were implemented to improve Icx uniformity. As a result, all circuits were successfully tested and show at least plusmn40% critical current density operational margins. An effect of the parasitic capacitance formed by a junction electrode and a ground plane on the operating margins of the and gate was investigated by numerical simulation. Test circuits were fabricated using YBa2Cu3O7-deltaramp-edge junction technology and were operated at temperatures higher than 30 K. Bias current margins were also measured, and they found to be close to the simulated ones.
New tools have been created to allow a superconducting design flow for schematic design, verification, and optimization. These tools integrate with the Cadence design environment. In single flux quantum superconducting electronics, individual component values, such as wire inductances, Josephson junction critical currents, and bias currents, must be optimized to allow for maximum deviance from the designer value, which is also known as the device margin. One tool is used to create a description of the proper circuit behavior. Included with this tool is the ability to automatically create the description from a Cadence netlist. The other tool is an automated device margin circuit schematic verification and optimization tool, which widens device margins while maintaining proper circuit behavior derived from the first tool. Additionally, this optimization tool can automatically correct the circuit schematic using the proper circuit behavior description. In this paper, the functionality of the language used to create the description of the proper circuit behavior is presented. Several circuits are then verified and optimized based on their correct behavior.
With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.
Superconducting Single-Flux-Quantum (SFQ) devices have been paid much attention as alternative devices for digital circuits, because of their high switching speed and low power consumption. For large-scale circuit design, the role of computer-aided design environment is significant. As the characteristics of the SFQ devices are different from conventional devices, a new design environment is required. In this paper, we propose a new timing-aware circuit description method which can be used for SFQ circuit design. Based on the description and the dedicated algorithms we have been developing for SFQ logic circuit design, we propose an integrated design flow for SFQ logic circuits. We have designed a circuit using our developed design tools along with the design flow and demonstrated the correct operation.
We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.