Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Consumer Electronics

Secure and Reliable 6G Communications with BCH-Based GLDPC and Kyber

Linh Nguyen, Cheol-Hong Min, Hanho Lee, Tuy Tan Nguyen

Published Jan 11, 2025• 1 citation
Publisher

Abstract

Channel coding in sixth-generation (6G) networks must attain exceptionally low bit error rate (BER), typically in the range of 10–6to 10–9, to ensure the requisite level of reliability. While fifth-generation (5G) New Radio (NR) coding techniques have made substantial progress, the inherent limitations of the low error floor impede the attainment of such stringent BER targets. Compared to the low-density parity check (LDPC) codes employed in 5G communications, generalized low-density parity check (GLDPC) codes offer a more advantageous tradeoff between computational complexity and error correction performance in 6G networks. GLDPC codes enhance traditional LDPC structures by incorporating more complex local decoding units within their check nodes. When coupled with cryptographic techniques, GLDPC codes can establish a robust information security framework. In this paper, we propose a new security-based GLDPC that uses a number of BCH matrices for the GLDPC decoding process combined with the Kyber algorithm (BCH-based KyGLDPC) before transmitting data to increase reli-ability and solve the security problem against quantum computer attacks. The system's performance is assessed using both image data and data encrypted prior to transmission in a white additive Gaussian noise environment. The results indicate that the system provides strong error correction and data security.

DOI
10.1109/icce63647.2025.10930099

Related papers

On Generalized LDPC Codes for 5G Ultra Reliable Communication

Yanfang Liu, Pablo M. Olmos, David G. M. Mitchell

Generalized low-density parity-check (GLDPC) codes, where single parity-check (SPC) constraint nodes are replaced with generalized constraint (GC) nodes, are a promising class of codes for low latency communication. In this paper, a practical construction of quasi-cyclic (QC) GLDPC codes is proposed, where the proportion of generalized constraints is determined by an asymptotic analysis. We analyze the message passing process and complexity of a GLDPC code over the additive white gaussian noise (AWGN) channel and present a constraint-to-variable update rule based on the specific codewords of the component code. The block error rate (BLER) performance of the GLDPC codes, combined with a complementary outer code, is shown to outperform a variety of state-of-the-art code and decoder designs with suitable lengths and rates for the 5G Ultra Reliable Communication (URC) regime over an additive white gaussian noise (AWGN) channel with quadrature PSK (QPSK) modulation.

arXiv:1910.06574•IEEE Information Theory Workshop (ITW)•Nov 1, 2018•8 citations

QUANTUM-INSPIRED ERROR CORRECTION CODES FOR ULTRA-RELIABLE COMMUNICATION IN NEXT-GENERATION NETWORKS

Syed Mohd Saqib, Sevuga Pandian A

The rapid growth of next-generation networks has created a strong demand for communication systems that have delivered high reliability, low latency, and resilience under harsh channel conditions. Although classical error correction codes have improved many wireless links, their performance has proved insufficient as data rates increased and channel dynamics became more unpredictable. This study has explored a quantum-inspired error correction framework that has combined structural principles from quantum stabilizer codes with the efficiency of classical block codes. The aim was to provide an adaptive mechanism that has reduced noise effects and supported ultra-reliable communication targets. The problem has emerged from the gap between existing coding techniques and the reliability requirements of mission-critical services. Classical codes have struggled when the channel has exhibited fast fading or burst noise, and quantum codes, while powerful, have required complex hardware. The proposed approach has addressed this gap by adopting quantum-inspired parity structures that have retained the lightweight processing of classical codes while mimicking the robustness observed in quantum systems. The method has employed a hybrid coding model that has integrated a modified stabilizer-like generator with a classical low-density parity check backbone. The encoder has produced redundant qubit-analogous syndromes that have allowed the decoder to infer error patterns with higher confidence. A sequential belief-propagation algorithm has been used, which has adjusted decoding weights according to channel variation. Simulations have been performed over Rayleigh and Rician channels, and the system has been tested under high mobility. The results of the proposed framework demonstrate substantial improvements over conventional coding methods. The hybrid stabilizer-LDPC structure reduces the bit error rate from 22.3% to 0.5% across an SNR range of 0–20 dB and lowers the frame error rate from 45.7% to 1.1%. Throughput improves from 4.2 Mbps at 0 dB to 13.8 Mbps at 20 dB, while the average decoding iterations decrease from 42 to 5, indicating reduced computational complexity. Under high-speed mobility, BER and FER remain low at 2.3% and 4.6%, respectively, while throughput stays above 10.2 Mbps and convergence requires only 12 iterations. These numerical results confirm that the proposed method provides highly reliable, efficient, and adaptive error correction suitable for next-generation networks.

ICTACT Journal on Communication Technology•Dec 1, 2025•0 citations

Decoding of Generalized LDPC Codes Using the BCJR Algorithm

Alexey A. Bandyukov, Andrey A. Metlyakov, Fedor I. Ivanov

Generalized low-density parity-check (GLDPC) codes have emerged as a promising class of error-correcting codes that extend the capabilities of traditional LDPC codes by incorporating more powerful component codes. This paper investigates an approach to construct long GLDPC codes using short component codes. In this scheme, the BCJR algorithm is used as a component decoder and integrated into the belief propagation algorithm. Simulation results demonstrate that constructions incorporating quasi-cyclic LDPC codes yield the best performance. Compared to the conventional decoding approach for LDPC codes, the proposed generalized constructions demonstrated better bit and frame error rate performance. This approach is promising for communication systems that require low latency. A comparison is also provided with LDPC codes constructed using the Progressive Edge-Growth (PEG) algorithm.

International Symposium on Problems of Redundancy in Information and Control Systems (REDUNDANCY)•Nov 5, 2025•0 citations

Quantum Communication Systems for Ensuring Secure 6G Network Infrastructure

Haranadha Reddy Busireddy Seshakagari, K. Reddy Madhavi, Nagaraj Ramrao +1 more

As sixth-generation (6G) wireless networks come into existence, there is more ever-growing demand for high-speed and secure communication than ever before. Conventional cryptographic methods are facing growing constraints to keep pace with the challenging reality of cyberattacks. Quantum-based communication technologies like quantum key distribution (QKD), quantum encryption, and quantum-resistant protocols provide an inherently secure means of transmitting data. This study examines how quantum communication technologies can be embedded within 6G architectures to provide enhanced data protection. With the help of AI and machine learning, 6G networks are able to anticipate threats and counter them, and quantum technologies offer unbreakable physical-layer encryption. Proposed work examines the security, architectural requirements, and implementation practicalities of this integration. In addition, we discussed the potential effect of quantum computing on present cryptographic techniques and describe future research directions for deployment at scale of quantum-secure communication in next-generation wireless systems.

CRC Press eBooks•Nov 28, 2025•0 citations

Federated Transfer Learning for Two-Stage Decoding of LDPC Codes in 6G Networks

Quoc Bao Phan, Linh Nguyen, Tuy Tan Nguyen

The fifth-generation new radio coding techniques, such as low-density parity-check (LDPC) codes, have made significant progress. However, their limitations in the low error floor region prevent them from meeting the stringent bit error rate (BER) targets required for sixth-generation (6G) communications. 6G aims to support services with BER as low as 10 −9 , providing the reliability needed for mission-critical applications. his is particularly crucial for ultra-reliable lowlatency communication. In this paper, we present a two-stage decoding method that combines the strengths of layered LDPC decoding and federated transfer learning (FTL). The layered LDPC decoding stage effectively handles the challenging waterfall region, reducing errors during the initial decoding process. In addition, the FTL model adapts to mitigate the error floor and accelerate its decline. This combination achieves lower error rates and faster performance improvements, reducing the need for retransmissions and enhancing overall system efficiency.

•Nov 12, 2024•0 citations

Performance Analysis of Different Flexible Decoding Algorithms for NR-LDPC Codes

Layla Mahdi Salih, Thuraya Mahmood Qaradaghi, Jalal J. Hamad Ameen

Channel coding technique is a fundamental building block in any modern communication system to realize reliable, fast, and secure data transmission. At the same time, it is a challenging and crucial task, as the data transmission happens in a channel where noise, fading, and other impairments are present. The Low-Density Parity-Check (LDPC) codes give substantial results close to the Shannon limit when the complexity and processing delay time are unlimited. In this paper, the performance of the LDPC decoding with four algorithms was investigated. The investigated four algorithms were Belief Propagation (BP), Layered Belief Propagation (LBP), Normalized min-sum (NMS), and Offset min-sum (OMS). These algorithms were examined for code rates ranging from 1/3 to 9/10 and message block lengths (64, 512, 1024, and 5120) bits. The simulation results revealed the flexibility of these decoders in supporting these code rates and block lengths, which enables their usage in a wide range of applications and scenarios for fifth-generation (5G) wireless communication. In addition, the effect of the maximum number of decoding iterations on the error correction performance was investigated, and a gain of 5.6 dB can be obtained by using 32 decoding iterations at BER=2*10-3 instead of one decoding iteration. The results showed that the decoders performed better for longer message blocks than for short message blocks, and less power was required for transmitting longer messages. Finally, the comparison results of their performance in terms of bit error rate (BER) under the same conditions showed a gain of 0.8 dB using LBP at BER= 10-5 compared with the NMS decoding algorithm.

Tikrit Journal of Engineering Sciences•Dec 11, 2022•3 citations
Channel coding in sixth-generation (6G) networks must attain exceptionally low bit error rate (BER), typically in the range of 10–6to 10–9, to ensure the requisite level of reliability. While fifth-generation (5G) New Radio (NR) coding techniques have made substantial progress, the inherent limitations of the low error floor impede the attainment of such stringent BER targets. Compared to the low-density parity check (LDPC) codes employed in 5G communications, generalized low-density parity check (GLDPC) codes offer a more advantageous tradeoff between computational complexity and error correction performance in 6G networks. GLDPC codes enhance traditional LDPC structures by incorporating more complex local decoding units within their check nodes. When coupled with cryptographic techniques, GLDPC codes can establish a robust information security framework. In this paper, we propose a new security-based GLDPC that uses a number of BCH matrices for the GLDPC decoding process combined with the Kyber algorithm (BCH-based KyGLDPC) before transmitting data to increase reli-ability and solve the security problem against quantum computer attacks. The system's performance is assessed using both image data and data encrypted prior to transmission in a white additive Gaussian noise environment. The results indicate that the system provides strong error correction and data security.
Generalized low-density parity-check (GLDPC) codes, where single parity-check (SPC) constraint nodes are replaced with generalized constraint (GC) nodes, are a promising class of codes for low latency communication. In this paper, a practical construction of quasi-cyclic (QC) GLDPC codes is proposed, where the proportion of generalized constraints is determined by an asymptotic analysis. We analyze the message passing process and complexity of a GLDPC code over the additive white gaussian noise (AWGN) channel and present a constraint-to-variable update rule based on the specific codewords of the component code. The block error rate (BLER) performance of the GLDPC codes, combined with a complementary outer code, is shown to outperform a variety of state-of-the-art code and decoder designs with suitable lengths and rates for the 5G Ultra Reliable Communication (URC) regime over an additive white gaussian noise (AWGN) channel with quadrature PSK (QPSK) modulation.
The rapid growth of next-generation networks has created a strong demand for communication systems that have delivered high reliability, low latency, and resilience under harsh channel conditions. Although classical error correction codes have improved many wireless links, their performance has proved insufficient as data rates increased and channel dynamics became more unpredictable. This study has explored a quantum-inspired error correction framework that has combined structural principles from quantum stabilizer codes with the efficiency of classical block codes. The aim was to provide an adaptive mechanism that has reduced noise effects and supported ultra-reliable communication targets. The problem has emerged from the gap between existing coding techniques and the reliability requirements of mission-critical services. Classical codes have struggled when the channel has exhibited fast fading or burst noise, and quantum codes, while powerful, have required complex hardware. The proposed approach has addressed this gap by adopting quantum-inspired parity structures that have retained the lightweight processing of classical codes while mimicking the robustness observed in quantum systems. The method has employed a hybrid coding model that has integrated a modified stabilizer-like generator with a classical low-density parity check backbone. The encoder has produced redundant qubit-analogous syndromes that have allowed the decoder to infer error patterns with higher confidence. A sequential belief-propagation algorithm has been used, which has adjusted decoding weights according to channel variation. Simulations have been performed over Rayleigh and Rician channels, and the system has been tested under high mobility. The results of the proposed framework demonstrate substantial improvements over conventional coding methods. The hybrid stabilizer-LDPC structure reduces the bit error rate from 22.3% to 0.5% across an SNR range of 0–20 dB and lowers the frame error rate from 45.7% to 1.1%. Throughput improves from 4.2 Mbps at 0 dB to 13.8 Mbps at 20 dB, while the average decoding iterations decrease from 42 to 5, indicating reduced computational complexity. Under high-speed mobility, BER and FER remain low at 2.3% and 4.6%, respectively, while throughput stays above 10.2 Mbps and convergence requires only 12 iterations. These numerical results confirm that the proposed method provides highly reliable, efficient, and adaptive error correction suitable for next-generation networks.
Generalized low-density parity-check (GLDPC) codes have emerged as a promising class of error-correcting codes that extend the capabilities of traditional LDPC codes by incorporating more powerful component codes. This paper investigates an approach to construct long GLDPC codes using short component codes. In this scheme, the BCJR algorithm is used as a component decoder and integrated into the belief propagation algorithm. Simulation results demonstrate that constructions incorporating quasi-cyclic LDPC codes yield the best performance. Compared to the conventional decoding approach for LDPC codes, the proposed generalized constructions demonstrated better bit and frame error rate performance. This approach is promising for communication systems that require low latency. A comparison is also provided with LDPC codes constructed using the Progressive Edge-Growth (PEG) algorithm.
As sixth-generation (6G) wireless networks come into existence, there is more ever-growing demand for high-speed and secure communication than ever before. Conventional cryptographic methods are facing growing constraints to keep pace with the challenging reality of cyberattacks. Quantum-based communication technologies like quantum key distribution (QKD), quantum encryption, and quantum-resistant protocols provide an inherently secure means of transmitting data. This study examines how quantum communication technologies can be embedded within 6G architectures to provide enhanced data protection. With the help of AI and machine learning, 6G networks are able to anticipate threats and counter them, and quantum technologies offer unbreakable physical-layer encryption. Proposed work examines the security, architectural requirements, and implementation practicalities of this integration. In addition, we discussed the potential effect of quantum computing on present cryptographic techniques and describe future research directions for deployment at scale of quantum-secure communication in next-generation wireless systems.
The fifth-generation new radio coding techniques, such as low-density parity-check (LDPC) codes, have made significant progress. However, their limitations in the low error floor region prevent them from meeting the stringent bit error rate (BER) targets required for sixth-generation (6G) communications. 6G aims to support services with BER as low as 10 −9 , providing the reliability needed for mission-critical applications. his is particularly crucial for ultra-reliable lowlatency communication. In this paper, we present a two-stage decoding method that combines the strengths of layered LDPC decoding and federated transfer learning (FTL). The layered LDPC decoding stage effectively handles the challenging waterfall region, reducing errors during the initial decoding process. In addition, the FTL model adapts to mitigate the error floor and accelerate its decline. This combination achieves lower error rates and faster performance improvements, reducing the need for retransmissions and enhancing overall system efficiency.
Channel coding technique is a fundamental building block in any modern communication system to realize reliable, fast, and secure data transmission. At the same time, it is a challenging and crucial task, as the data transmission happens in a channel where noise, fading, and other impairments are present. The Low-Density Parity-Check (LDPC) codes give substantial results close to the Shannon limit when the complexity and processing delay time are unlimited. In this paper, the performance of the LDPC decoding with four algorithms was investigated. The investigated four algorithms were Belief Propagation (BP), Layered Belief Propagation (LBP), Normalized min-sum (NMS), and Offset min-sum (OMS). These algorithms were examined for code rates ranging from 1/3 to 9/10 and message block lengths (64, 512, 1024, and 5120) bits. The simulation results revealed the flexibility of these decoders in supporting these code rates and block lengths, which enables their usage in a wide range of applications and scenarios for fifth-generation (5G) wireless communication. In addition, the effect of the maximum number of decoding iterations on the error correction performance was investigated, and a gain of 5.6 dB can be obtained by using 32 decoding iterations at BER=2*10-3 instead of one decoding iteration. The results showed that the decoders performed better for longer message blocks than for short message blocks, and less power was required for transmitting longer messages. Finally, the comparison results of their performance in terms of bit error rate (BER) under the same conditions showed a gain of 0.8 dB using LBP at BER= 10-5 compared with the NMS decoding algorithm.