Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Symposium on Problems of Redundancy in Information and Control Systems (REDUNDANCY)

Decoding of Generalized LDPC Codes Using the BCJR Algorithm

Alexey A. Bandyukov, Andrey A. Metlyakov, Fedor I. Ivanov

Published Nov 5, 2025• 0 citations
Publisher

Abstract

Generalized low-density parity-check (GLDPC) codes have emerged as a promising class of error-correcting codes that extend the capabilities of traditional LDPC codes by incorporating more powerful component codes. This paper investigates an approach to construct long GLDPC codes using short component codes. In this scheme, the BCJR algorithm is used as a component decoder and integrated into the belief propagation algorithm. Simulation results demonstrate that constructions incorporating quasi-cyclic LDPC codes yield the best performance. Compared to the conventional decoding approach for LDPC codes, the proposed generalized constructions demonstrated better bit and frame error rate performance. This approach is promising for communication systems that require low latency. A comparison is also provided with LDPC codes constructed using the Progressive Edge-Growth (PEG) algorithm.

DOI
10.1109/redundancy68069.2025.11301108

Related papers

On the Design of Generalized LDPC Codes with Component BCJR Decoding

Yanfang Liu, Pablo M. Olmos, David G. M. Mitchell

Generalized low-density parity-check (GLDPC) codes, where the single parity-check (SPC) nodes are replaced by generalized constraint (GC) nodes, are known to offer a reduced gap to capacity when compared with conventional LDPC codes, while also maintaining linear growth of minimum distance. However, for certain classes of practical GLDPC codes, there remains a gap to capacity even when utilizing blockwise decoding algorithm at GC nodes. In this work, we propose to optimize the design of GLDPC codes where the GC nodes are decoded with a trellis-based bit-wise Bahl-Cocke-Jelinek- Raviv (BCJR) component decoding algorithm. We analyze the asymptotic threshold behavior of GLDPC codes and determine the optimal proportion of the GC nodes in the GLDPC Tanner graph.We show significant performance improvements compared to existing designs with the same order of decoding complexity.

Globecom•Dec 1, 2020•6 citations

Irregular Generalized LDPC codes in Practical Communication Scenarios

Irina E. Bocharova, Boris D. Kudryashov, Sander Mikelsaar

High-rate irregular Generalized LDPC (GLDPC) codes with low-complexity constituent codes are studied. The main area of focus is the optimization of the underlying irregular binary LDPC codes and their matching with constituent codes. Finite length random coding bound on the maximum-likelihood decoding error probability of a random ensemble of irregular GLDPC codes is derived and compared with a similar bound for non-binary (NB) LDPC codes over small alphabets.A new algorithm for assigning columns of the parity-check matrix of a constituent code to nonzero elements of a base matrix of the quasi-cyclic (QC)-GLDPC code is presented. Examples of the constructed QC-GLDPC codes are given. The simulation results for frame error rate (FER) performance of the belief-propagation (BP) decoding for the QC-GLDPC codes are presented and compared with the same performance of NB QC-LDPC codes over small alphabets and binary LDPC codes in the WiFi and 5G standards.Both GLDPC codes and NB LDPC codes with sufficiently low decoding complexity are shown to outperform their binary LDPC counterparts, while GLDPC codes appear to be more advantageous in terms of decoding complexity.

IEEE Information Theory Workshop (ITW)•Nov 1, 2022•1 citation

Quasi-cyclic low-density parity-check codes based on decoder optimised progressive edge growth for short blocks

Cornelius T. Healy, Rodrigo C. de Lamare

A novel construction for quasi-cyclic (QC) regular and irregular low-density parity-check (LDPC) codes based on a modification of the QC Progressive Edge Growth (PEG) algorithm is presented. Edge placement of the PEG-based algorithm is enhanced by use of the sum-product algorithm in the design of the parity-check matrix. The proposed algorithm is highly flexible in block length and rate, in particular when compared with algebraic constructions. The codes constructed by the proposed methods are tested in the AWGN channel and performance improvements are achieved. The proposed QC-LDPC codes provide an inherent trade-off between code performance and encoding/decoding complexity.

IEEE International Conference on Acoustics Speech and Signal Processing•Mar 1, 2012•3 citations

Structural Analysis of Generalized Quasi-Cyclic LDPC Codes: Rank, Design, and Generator Matrices

Roxana Smarandache, David G. M. Mitchell, Anthony Gómez-Fonseca

Generalized low-density parity-check (GLDPC) codes, where single parity-check constraints on the code bits are replaced with generalized constraints (an arbitrary linear code), are a promising class of codes for low-latency communication. The block error rate performance of the GLDPC codes, combined with a complementary outer code, has been shown to outperform a variety of state-of-the-art code and decoder designs with suitable lengths and rates for the 5G ultra-reliable low-latency communication (URLLC) regime. A major drawback of these codes is that it is not known how to construct appropriate polynomial matrices to encode them efficiently. In this paper, we analyze practical constructions of quasi-cyclic GLDPC (QC-GLDPC) codes and show how to construct polynomial generator matrices in various forms using minors of the polynomial matrix. The approach can be applied to fully generalized matrices or partially generalized (with mixed constraint node types) to find better performance/rate trade-offs. The resulting encoding matrices are presented in useful forms that facilitate efficient implementation. The rich substructure displayed also provides us with new methods of determining low weight codewords, providing lower and upper bounds on the minimum distance and often giving those of weight equal to the minimum distance. Based on the minors of the polynomial parity-check matrix, we also give a formula for the rank of any parity-check matrix representing a QC-LDPC or QC-GLDPC code, and hence, the dimension of the code. Finally, we show that by applying double graph-liftings, the code parameters can be improved without affecting the ability to obtain a polynomial generator matrix.

IEEE Transactions on Information Theory•Oct 27, 2025•3 citations

Generalized constructions, decoding and implementation of LDPC codes

Yige Wang

Low-density parity-check (LDPC) codes have received significant attention due to their near-Shannon-limit error performance. The belief propagation (BP) algorithm is the best-known decoding algorithm for LDPC codes. However it often needs several tens or hundreds of iterations to converge. Although fast convergence BP algorithms have been proposed, there is neither an easy tool to analyze their performance nor a standard VLSI architecture to implement them. Moreover, there exists a trade-off between waterfall (i.e., threshold) and error floor (i.e., minimum pseudo distance) performances for LDPC codes. For generalized LDPC (GLDPC) codes, better minimum distance properties can be achieved but at the expense of a rate loss. This research investigates performance analysis and hardware implementation of LDPC codes using fast convergence algorithms. Closed-form extrinsic mutual information transfer (EXIT) functions for several fast convergence BP decoding algorithms are proposed. It is shown theoretically that these algorithms converge faster than standard BP, while the corresponding thresholds remain unchanged. Since these algorithms are of serial nature, their parallelization without compromising convergence speed and error performance is also investigated. This result is useful in hardware implementation because in practice partly parallel decoding schemes are often used. This result also sheds some light on how to group nodes in order to preserve performance. The VLSI architecture of a particular decoding algorithm for LDPC codes is proposed. This approach can be adopted in many standards to achieve a large throughput. Doubly GLDPC (DGLDPC) codes are proposed to compensate the rate loss of GLDPC codes. EXIT charts are used to analyze DGLDPC codes and EXIT functions for variable component codes are thoroughly discussed. Based on EXIT charts, differential evolution is used to optimize their threshold. Ensemble weight enumerators are generalized to protograph-based DGLDPC codes. Simulation results show that DGLDPC codes constructed based on these results can improve the performance of their LDPC and GLDPC counterparts in both the waterfall region and the error floor region.

•Jan 1, 2008•3 citations

Construction of quasi-cyclic low-density parity-check codes using Hamming codewords

Haijing Zhong, Shancheng Zhao, Li Chen +1 more

In this paper, we propose a new approach to construct quasi-cyclic low-density parity-check (QC-LDPC) codes using Hamming codewords of weight three, namely the HM-QC-LDPC codes. Thanks to the distance property of Hamming codes, length four cycles are avoided from the Tanner graph of the constructed codes, resulting in codes of girth six. This approach can be further extended to construct QC-LDPC codes of girth eight. Our numerical results show that the proposal has a better cycle profile than the progressive-edge-growth (PEG) constructed codes, and consequently prevails in performance. Moreover, the constructed QC-LDPC code prevails the LDPC code of the IEEE802.22 standard by 0.2 dB at the bit error rate (BER) of 10-8when the codeword length is within hundreds of bits, making it a promising candidate for scenarios where strict decoding latency is imposed.

International Conference on Wireless Communications and Signal Processing (WCSP)•Oct 1, 2016•1 citation
Generalized low-density parity-check (GLDPC) codes have emerged as a promising class of error-correcting codes that extend the capabilities of traditional LDPC codes by incorporating more powerful component codes. This paper investigates an approach to construct long GLDPC codes using short component codes. In this scheme, the BCJR algorithm is used as a component decoder and integrated into the belief propagation algorithm. Simulation results demonstrate that constructions incorporating quasi-cyclic LDPC codes yield the best performance. Compared to the conventional decoding approach for LDPC codes, the proposed generalized constructions demonstrated better bit and frame error rate performance. This approach is promising for communication systems that require low latency. A comparison is also provided with LDPC codes constructed using the Progressive Edge-Growth (PEG) algorithm.
Generalized low-density parity-check (GLDPC) codes, where the single parity-check (SPC) nodes are replaced by generalized constraint (GC) nodes, are known to offer a reduced gap to capacity when compared with conventional LDPC codes, while also maintaining linear growth of minimum distance. However, for certain classes of practical GLDPC codes, there remains a gap to capacity even when utilizing blockwise decoding algorithm at GC nodes. In this work, we propose to optimize the design of GLDPC codes where the GC nodes are decoded with a trellis-based bit-wise Bahl-Cocke-Jelinek- Raviv (BCJR) component decoding algorithm. We analyze the asymptotic threshold behavior of GLDPC codes and determine the optimal proportion of the GC nodes in the GLDPC Tanner graph.We show significant performance improvements compared to existing designs with the same order of decoding complexity.
High-rate irregular Generalized LDPC (GLDPC) codes with low-complexity constituent codes are studied. The main area of focus is the optimization of the underlying irregular binary LDPC codes and their matching with constituent codes. Finite length random coding bound on the maximum-likelihood decoding error probability of a random ensemble of irregular GLDPC codes is derived and compared with a similar bound for non-binary (NB) LDPC codes over small alphabets.A new algorithm for assigning columns of the parity-check matrix of a constituent code to nonzero elements of a base matrix of the quasi-cyclic (QC)-GLDPC code is presented. Examples of the constructed QC-GLDPC codes are given. The simulation results for frame error rate (FER) performance of the belief-propagation (BP) decoding for the QC-GLDPC codes are presented and compared with the same performance of NB QC-LDPC codes over small alphabets and binary LDPC codes in the WiFi and 5G standards.Both GLDPC codes and NB LDPC codes with sufficiently low decoding complexity are shown to outperform their binary LDPC counterparts, while GLDPC codes appear to be more advantageous in terms of decoding complexity.
A novel construction for quasi-cyclic (QC) regular and irregular low-density parity-check (LDPC) codes based on a modification of the QC Progressive Edge Growth (PEG) algorithm is presented. Edge placement of the PEG-based algorithm is enhanced by use of the sum-product algorithm in the design of the parity-check matrix. The proposed algorithm is highly flexible in block length and rate, in particular when compared with algebraic constructions. The codes constructed by the proposed methods are tested in the AWGN channel and performance improvements are achieved. The proposed QC-LDPC codes provide an inherent trade-off between code performance and encoding/decoding complexity.
Generalized low-density parity-check (GLDPC) codes, where single parity-check constraints on the code bits are replaced with generalized constraints (an arbitrary linear code), are a promising class of codes for low-latency communication. The block error rate performance of the GLDPC codes, combined with a complementary outer code, has been shown to outperform a variety of state-of-the-art code and decoder designs with suitable lengths and rates for the 5G ultra-reliable low-latency communication (URLLC) regime. A major drawback of these codes is that it is not known how to construct appropriate polynomial matrices to encode them efficiently. In this paper, we analyze practical constructions of quasi-cyclic GLDPC (QC-GLDPC) codes and show how to construct polynomial generator matrices in various forms using minors of the polynomial matrix. The approach can be applied to fully generalized matrices or partially generalized (with mixed constraint node types) to find better performance/rate trade-offs. The resulting encoding matrices are presented in useful forms that facilitate efficient implementation. The rich substructure displayed also provides us with new methods of determining low weight codewords, providing lower and upper bounds on the minimum distance and often giving those of weight equal to the minimum distance. Based on the minors of the polynomial parity-check matrix, we also give a formula for the rank of any parity-check matrix representing a QC-LDPC or QC-GLDPC code, and hence, the dimension of the code. Finally, we show that by applying double graph-liftings, the code parameters can be improved without affecting the ability to obtain a polynomial generator matrix.
Low-density parity-check (LDPC) codes have received significant attention due to their near-Shannon-limit error performance. The belief propagation (BP) algorithm is the best-known decoding algorithm for LDPC codes. However it often needs several tens or hundreds of iterations to converge. Although fast convergence BP algorithms have been proposed, there is neither an easy tool to analyze their performance nor a standard VLSI architecture to implement them. Moreover, there exists a trade-off between waterfall (i.e., threshold) and error floor (i.e., minimum pseudo distance) performances for LDPC codes. For generalized LDPC (GLDPC) codes, better minimum distance properties can be achieved but at the expense of a rate loss. This research investigates performance analysis and hardware implementation of LDPC codes using fast convergence algorithms. Closed-form extrinsic mutual information transfer (EXIT) functions for several fast convergence BP decoding algorithms are proposed. It is shown theoretically that these algorithms converge faster than standard BP, while the corresponding thresholds remain unchanged. Since these algorithms are of serial nature, their parallelization without compromising convergence speed and error performance is also investigated. This result is useful in hardware implementation because in practice partly parallel decoding schemes are often used. This result also sheds some light on how to group nodes in order to preserve performance. The VLSI architecture of a particular decoding algorithm for LDPC codes is proposed. This approach can be adopted in many standards to achieve a large throughput. Doubly GLDPC (DGLDPC) codes are proposed to compensate the rate loss of GLDPC codes. EXIT charts are used to analyze DGLDPC codes and EXIT functions for variable component codes are thoroughly discussed. Based on EXIT charts, differential evolution is used to optimize their threshold. Ensemble weight enumerators are generalized to protograph-based DGLDPC codes. Simulation results show that DGLDPC codes constructed based on these results can improve the performance of their LDPC and GLDPC counterparts in both the waterfall region and the error floor region.
In this paper, we propose a new approach to construct quasi-cyclic low-density parity-check (QC-LDPC) codes using Hamming codewords of weight three, namely the HM-QC-LDPC codes. Thanks to the distance property of Hamming codes, length four cycles are avoided from the Tanner graph of the constructed codes, resulting in codes of girth six. This approach can be further extended to construct QC-LDPC codes of girth eight. Our numerical results show that the proposal has a better cycle profile than the progressive-edge-growth (PEG) constructed codes, and consequently prevails in performance. Moreover, the constructed QC-LDPC code prevails the LDPC code of the IEEE802.22 standard by 0.2 dB at the bit error rate (BER) of 10-8when the codeword length is within hundreds of bits, making it a promising candidate for scenarios where strict decoding latency is imposed.